Page 6
2.0 SAFETY PRECAUTIONS
1. The operators of this machine must be qualified and well trained in the operation of this machine.
The operators must be aware of the capacities and the proper use of this machine.
2. This manual is not intended to teach untrained personnel how to operate equipment.
3. NEVER OPERATE THIS MACHINE WITH ANY OF THE PROTECTIVE GUARDS OR
HOODS OPEN OR REMOVED!
4. Wear the appropriate personal protective equipment. Safety glasses are required at all times when
operating or observing this machine in operation.
5. Never place any part of your body into the path of the saw blade, material vise or roller feed
assemblies.
6. Do not wear loose fitting clothing, gloves or jewelry when operating this machine.
7. All electrical connections shall be made by a qualified electrician. This machine must be grounded
in accordance with the National Electric Code.
8. Disconnect the machine from the power source before performing maintenance or changing
blades.
9. Strictly comply with all of the warning labels and decals on the machine. Never remove any of the
labels. Replace worn or damaged labels promptly.
10. Practice good housekeeping. Keep the area around the machine clean and dry. Do not obstruct the
operator’s position by placing anything around the machine that would impede the operator’s
access to any of the machine’s functions.
11. When sawing, always support long pieces and make sure that the material is properly clamped.
12. Keep the guards, as well as all other parts of the saw, in good working condition. Replace worn
parts promptly.
13. Do not alter or modify this machine in any way without written permission from the
manufacturer.
14. Set up a program of routine inspections and maintenance for this machine. Make all repairs and
adjustments in accordance with the manufacturer’s recommendations.
