Scolmore ClickSmart RF Pilot Manual de usuario
Scolmore International Ltd,
Scolmore Park, Landsberg,
Lichfield Road Industrial Estate,
Tamworth, Staordshire,
B79 7XB
Web: click-smart.com
Tel: +44 (0) 1827 63454
Fax: +44 (0) 1827 63362
Email: sales@scolmore.com
18 Corrig Road,
Sandyford Industrial Estate,
Dublin 18,
Ireland
D18 WV79
Web: clicklitehouse.ie
Tel: +353 (1) 2811 122
Fax: +353 (1) 2811 224
Email: sales@clicklitehouse.ie
V10.0 Rev1.0
RF Pilot
Installation Manual
Make your home smarter
with a wireless remote control.
40 Channel Remote
Control With OLED Display
Congratulations on purchasing the RF Pilot handheld remote control.
The controller is an element of the Click Smart system.
In conjunction with other Click Smart devices the RF Pilot offers you:
- Comfortable handheld control
- Activation of household appliances and devices
- Light dimming and creation of light scenes
- Control of blinds/shutters, garage doors, awnings
- Activate multiple devices with a single press
- Wireless communication without unnecessary cabling
2
RF Pilot Installation Manual
Before You Start...
This manual provides information for the use and installation of the device. The device may only
be installed and connected by persons with the required professional qualications who have become
familiarised with this manual and the functions of the device. Trouble-free operation also depends on
the previous method of transportation, storage and handling. Should you become aware of any signs of
damage, deformation, malfunction or of any missing parts, do not install this product and return it to the
vendor. After the expiry of its service life, the product and all its parts must be disposed of as electronic
waste. With consideration to the transmission of the RF signal, ensure that RF components are suitably
located in the building where the device is to be installed. The Click Smart system must only be installed
in indoor areas. The device has not been designed for outdoor use or use in a moist environment, it must
not be installed in metal boxes or plastic distribution boxes with metal doors as this would prevent the
transmission of the radio frequency signal. Click Smart is not recommended for the control of devices
providing for vital life functions or for the control of risk devices such as lifts, pulleys etc. - radio frequency
transmissions can be hampered by an obstacle or interfered with, or the transmitter battery may become
depleted etc. thus disabling the remote control. Not suitable for use in an industrial environment.
Before You Start
3
RF Pilot Installation Manual
Content:
Before You Start.............................................2
Technical Parameters ....................................4
Characteristics...............................................5
Overview of Click Smart Devices ..................6
Device Details ................................................8
Insertion of Batteries .....................................8
Basic Steps ....................................................9
Controller Activation....................................12
Programming Menu
Initial Setup - Language ..............................13
Initial Setup - Date & Time...........................14
Rooms..........................................................15
Receivers .....................................................17
Receiver Functions......................................22
Scenes .........................................................25
Favourites ....................................................30
Display .........................................................36
Device Reset................................................37
Universal Information ..................................38
Important Information..................................39
On Screen Warnings ...................................40
Contents
4
Other data
Operating
temperature: 0 .. +55 °C
Storage
temperature: -20 ..+70 °C
Protection: IP20
Working position: Any
Dimensions: 130 x 41 x 18 mm
Weight: 61 g
Related
standards:
EN 60730, EN 300 220, EN 301 489
RTTE Directive, Gov. Reg. No.
426/2000Sb (Directive1999/EC)
Display
Type: Colour OLED
Resolution: 128 x 128 pixels / 262,144 colours
Side ratio: 1:1
Visible surface: 26 x 26 mm
Backlight: Self-illuminating text
Diagonal: 1.5“
Control: Direction button, control buttons
Power supply
Power supply: 2 x 1.5V AAA batteries*
Service life: Approx. 3 years (Dependant on
frequency of use and battery type)
Control
Range in open
area: Up to 200M
Frequency: 868.5 MHz
Technical Parameters
* Batteries are included.
Technical Parameters
5
RF Pilot Characteristics
The RF Pilot handheld remote control enables intelligent control of Click Smart receivers.
- Sending commands to switching, dimming and blind/shutter receivers
- RF Pilot measures and displays the local surrounding temperature
- The RF Pilot remote can be programmed with up to 40 receivers
- You can rename rooms and receivers/appliances controlled as required
- The “Scene” mode enables the control of up to 10 receivers within each scene - multiple devices
controlled with a single press
- You can include the most frequently used devices/scenes in your “Favourite” menu and control them
immediately after switching on the RF Pilot
- Range of up to 200M*
- Operating frequency 868.5 Mhz
- Colour: Anthracite Grey
- Powered by 2 x AAA batteries
*If the signal passes through building materials and/of furniture the signal range may be reduced. A signal
range test is always recommended prior to installation.
Characteristics
6
External Antenna
AN-E
Antenna (3M cable)
RFSA-61M and RFSA-66M
(supplied separately)
RFSAI-61B
16A 230V~ single
channel multifunction
switching receiver with
3V DC switch input
6 functions
RFSA-62B
2 x 8A 230V~ two
channel multifunction
switching receiver
6 functions on each
channel
Overview of Devices Controlled by the RF Pilot
RFJA-12B/230V
Blind/shutter receiver
2 x switching 8A 230V~
relay with protection
RFJA-12B/24VDC
Roller blind/shutter
receiver contactless
switching 12-24V DC
RFSA-61M
16A 230V~ single
channel multifunction
switching receiver
6 functions
RFSA-66M
6 x 8A 230V~ six channel
multifunction switching
receiver.
6 functions on each
channel
Switching Receivers
Blind/Shutter Receivers
RFSC-61
13A 230V~ multifunction
plug-in switching receiver
6 functions
Overview of Click Smart
Devices
7
Dimming Receiver
RFDAC-71B
Receiver with analogue output 0(1)-
10V 1 x switching contact 16A 230V~
7 functions
Control devices with (0)1-10V
analogue input
Analogue Receiver & Dim Pack
DIM-6
2000Va dimming pack with 0(1)-10V
input and momentary switch input
(derate for LED loads)
Becomes wireless when used in
conjunction with RFDAC-71B
RFDEL-71B
160Va 230V~ multifunction
LED dimming receiver with
load selection, trim function
and switch input
7 functions
Signal Repeater
RFRF-20/B
Plug-in repeater can extend
the range of up to 20 receivers
controlled by the RF Pilot.
Can also be utilised to bypass
building elements.
Overview of Devices Controlled by the RF Pilot
8
+
-
+
-
Display
Direction
Dial
Control
Button T1
Control
Button T2
Battery
Cover
RF PILOT
fw V10.0
868.5 MHz
Display details - basic display
Device description Battery insertion
TimeDate
Enter the Menu
Quick Control
Options
Low Battery
Indicator
Remove the battery cover and insert two AAA batteries
as shown.
Battery
cover
we 01.02.17 12:54
Favourite 1
Favourite 2
Favourite 3
Favourite 4
Favourite 5
Favourite 6
Favourite 7
Temp.: 23C MENU
The memory has an independent power supply. Any custom
adjustment (except for time and date) will remain.
After inserting the batteries, the RF Pilot name and the firmware
version will appear on the initial screen as shown above.
To set the Date and Time elements see page 14.
Current Temperature
Display
Device details; Insertion of batteries
Device Details Insertion of
Batteries
9
Always remember that the radio signal range for RF installations depends on the building structure,
materials used and the location of the installed units within the building.
Step 1 - Location of ClickSmart devices
Brick walls
10-40 %
Wooden structures
with plaster boards
5-20 %
Reinforced concrete
40-90 %
Metal partitions
90-100 %
Common glass
10-20 %
Basic Steps for Successful Programming
Radio frequency signal loss through various construction materials
Note: Where the signal is reduced through building materials or elements the ClickSmart
repeater (RFRP-20/B) can be used to help increase the signal range and also assist in bypassing
elements causing signal reduction.
Certain types of glass which assist in saving energy may contain a special lm e.g. metal oxide.
In these types of installation may result in 90-100% of signal loss. The Click Smart repeater
(RFRP-20/B) may be able to assist in bypassing the energy saving glass.
Basic Steps
Tabla de contenidos
