ScienceTech C2D 10X Manual de usuario
WARNING!
Only for use by children over 10 years old. Only for use under the supervision of an
adult. This toy contains functional sharp needle, sharp edge on scalpel, scissors,
spatula, tweezers, and prepared slide.
CAUTION!
Read the instructions before use, follow them and keep
them for reference.
10x • 60x • 120x • 220x
*C
2D Digital Microscope
*C
2D Camera Stand
*USB Cable (5ft. or 1.5m )
*Software (CD-ROM)
*Six Prepared Slides with Case
*Dissecting Tools
* Instruction Manual
This C2D digital Microscope will encourage creative play activities that are directed by your children by
harnessing the power of your PC. With the C2D Digital Microscope, you will be able to explore your
surroundings in a way as never before and share these findings with friends and family. There are many
benefits from using the C2D Digital Microscope and some are:
• Use software to manipulate images in numerous and insightful ways
• Create shows with video recording features
• View the images with your friends on the computer
About this manual
This manual is being designed so that the information is easy and ready to find in order to make setting up
your microscope simple and less frustrating.
This instruction manual helps to you:
• Set up your C2D Digital Microscope
• Maintain it
• Change bulb when required
• Troubleshoot any problems that arise
ABOUT THE
C2D DIGITAL MICROSCOPE
ABOUT THE
C2D DIGITAL MICROSCOPE
TABLE OF CONTENTS
TABLE OF CONTENTS
Congratulations for purchasing the C2D Digital Microscope, one of the newest learning tools!
* TRADEMARKS:
Microsoft Office 97, Office 2000, Windows 2000, Windows XP, NetMeeting, Windows 98TM ( 2nd Edition),
Windows Me and DirectX are registered trademarks of Microsoft Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Adobe and PhotoShop are registered trademarks of Adobe Corporation.
Basic Components
Detailed Components
System Requirements
System Support
Software Installation
1
2
3
3
4 - 7
Using the C2D Digital Microscope
Using Handheld Microscope Mode
Using the C2D Camera
Using the C2D Software
Care & Maintenance
Troubleshooting
8
9
9
13
14
10-12
1
BASIC COMPONENTS
BASIC COMPONENTS
CAMERA
CD Camera
Configurable Microscope basement
USB cable (1.5m long)
Instruction manual
Software (CD-ROM)
Six prepared slides
Seven Scientific Instruments
WARNING!
Only for use by children over 10 years old. Only for use under the supervision of an
adult. This toy contains functional sharp needle,sharp edge on scalpel, scissors and
prepared slide.
CAUTION!
Read the instructions before use, follow them and keep
them for reference.
2
DETAILED COMPONENTS
DETAILED COMPONENTS
Your Package contains:
1. C2D Digital Microscope
2. C2D Camera Stand
3. USB Cable (5 ft. or 1.5m)
4. Software (CD-ROM)
5. Prepared Slides (6) with Case
6. Stainless Steel Spatula
7. Stainless Steel Scissors
8. Stainless Steel Tweezers
9. Stainless Steel Needle
10. Stainless Steel Scalpel
11. Stirring Rod
12. Dropper
13. Instruction Manual
USB Cable
Handheld Unit
Shutter Button
Focus Adjustment
Revolving Turret Ring
CAMERA
C2D Digital Microscope Arm
Compartment
Focus
Knob
Light
Color Filter / Aperture
C2D CAMERA
• A computer that is USB capable
• Windows 98TM (2nd Edition), Me Windows® 2000 Professional and Windows XP
• Intel® PentiumTM 200 MHz or faster
• 64 MB RAM
• Minimum 75 MB free hard disk space
• Sound and Video that are compatible with Microsoft® DirectX® 8.0 or up
• Quad speed (4x) or higher CD-ROM
• 800x600 display resolution, 16 bit colour
• 16-bit windows compatible sound device
• Mouse and Keyboard
This C2D Digital Microscope supports* Microsoft® Video for Windows® (VFW). You can use third party
software that supports VFW to access this product. This C2D Digital Microscope also supports* Microsoft
NetMeeting. You can preview your pictures via the Internet with your friends!
Please check Microsoft® web site http://www.microsoft.com for details.
* Feature only available on computer running Windows 98TM(2nd Edition) or Me.
3
SYSTEM REQUIREMENTS
SYSTEM REQUIREMENTS
SYSTEM SUPPORT
SYSTEM SUPPORT
The installation of the software consists two steps:
STEP ONE - Device driver installation
STEP TWO - C2D software installation
1. Insert the CD-ROM into the CD-ROM drive, the setup program will be
activated automatically.
STEP ONE - Install Device Driver
NOW CONNECT THE C2D DIGITAL MICROSCOPE
™
TO THE COMPUTER
2. After connecting the C2D Digital Microscope to the computer, you will see a "new hardware
found" message.
NOTE: Clicking the button
will skip to STEP TWO - Install
the C2D Software.
Next >
Next
Cancel
4
SOFTWARE INSTALLATION
SOFTWARE INSTALLATION
Cancel
Next
Next
Cancel
Next
Back Cancel
Next
Cancel
5
Next
Cancel
Next
Cancel
Back
3. Click the button
Next >
4. Click the button again and you will see the following screen.
Next >
6
Next
Cancel
Cancel
Finish
5. Select "CD-ROM Drive" and click button to install the driver accordingly.
Next >
Next Cancel
Back Cancel
Next >
6. Once the new hardware device has
been installed properly, please proceed
to step two to install the C2D software.
Once the hardware has been installed
properly, click the button to
finish the device driver installation.
For Windows 2000 or XP:
A pop - up window will appear when the
C2D device driver is being installed,
please click
STEP TWO - Install the C2D Software
dfasdasd
NOTE: The setup program will take a while to install Microsoft® DirectX® 8.0 components.
It does not mean that your computer has crashed. You might have to restart your computer.
Next
Cancel
Finish
1. Click the button to finish the application
software installation.
Next >
USING THE C2D SOFTWARE, continued
2. Once the software has finished installation,
click the button. You can now run
the C2D software.
7
Setup Suggestion
Please remember that the C2D Digital Microscope can be used in the handheld mode, so make sure that
the work area is free from obstruction and the monitor is viewable.
Controls
Learning the C2D controls
Once you have the C2D software installed and running, you can use the controls to focus, change
magnification and capture picturess/movies.
USING THE C2D
DIGITAL MICROSCOPE
USING THE C2D
DIGITAL MICROSCOPE
Focus Knob
Revolving Turret Ring
Shutter Button
Focus Adjustment
Color Filter / Aperture
8
Focusing – 1. Focus the image on the screen with the focusing knob.
2. You should be able to see the image become closer or further away as the focus knob
is adjusted very slowly.
NOTE : This image on the screen will have a delay. Turn the focus knob slowly and wait for the
image to refresh before adjusting again.
Changing Magnification – Change the magnification of the image by turning the Revolving Turret Ring.
Changing Color Filter – Different specimen effect can be displayed by rotating the Color Filter/Aperture.
Taking Images – Images on the screen can be captured (recorded) by pressing the Shutter Button.
Lighting – The light can be turned on or off through the software.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Manuales populares de Microscopio de otras marcas
VWR
VWR VisiScope 384 Series Manual de usuario
Nikon
Nikon ECLIPSE E200 POL Manual de usuario
Leica
Leica DI C800 Manual
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manual de usuario
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manual de usuario
Olympus
Olympus SZ61 Manual de usuario