Schlage S-480 Manual de usuario

How to Install

(Door thickness 40-50mm)

1. Please read the installation manual before you install the product.

2. The strike guider is served to install correctly, remove the strike guider

after installation.

3. Please check door thickness and door handing before installation.

This product can be installed with door thickness 40-50mm

Firstly, check the door opens and closes smoothly.

Fold 90° angle on the fold line of the installation template and stick it to the

door and mark for installation.

Drill holes as specified on template.

Where replacing existing mechanical auxiliary lock, use center hole on the

mounting plate to adjust position and install the product.

Fasten the front using screw (M5x30, 2pcs), to fix the mounting plate (as

required check the direction of the mounting plate). Use screw (FH1x 30, 5pcs)

to increase the strength of the mounting plate fixing.

Pull through Front cable and connect to Back connector, and then fix to the

mounting plate by using screw (M5x29, 4pcs).

10.

Fix the strike with screw (FH1x 30, 6pcs) and ensure the deadbolt aligns

correctly with strike.

Insert batteries (check polarity).

Check the door opens and closes properly.

Read the user’s manual to register PIN code.

*For Metal Doors: Please use the T4x19 screws instead of FH1x 30

(Timber Doors).

(Use on indoor side)

Installation Template S-480

Please check measurements

when printing template

83mm

58mm

FH1x 30 (5pcs)

FH1x 30 (3pcs)

Screw

How to Install

(Door thickness 40-50mm)

1. Please read the installation manual before you install the product.

2. The strike guider is served to install correctly, remove the strike guider

after installation.

3. Please check door thickness and door handing before installation.

This product can be installed with door thickness 40-50mm

Firstly, check the door opens and closes smoothly.

Fold 90° angle on the fold line of the installation template and stick it to the

door and mark for installation.

Drill holes as specified on template.

Where replacing existing mechanical auxiliary lock, use center hole on the

mounting plate to adjust position and install the product.

Fasten the front using screw (M5x30, 2pcs), to fix the mounting plate (as

required check the direction of the mounting plate). Use screw (FH1x 30, 5pcs)

to increase the strength of the mounting plate fixing.

Pull through Front cable and connect to Back connector, and then fix to the

mounting plate by using screw (M5x29, 4pcs).

10.

Fix the strike with screw (FH1x 30, 6pcs) and ensure the deadbolt aligns

correctly with strike.

Insert batteries (check polarity).

Check the door opens and closes properly.

Read the user’s manual to register PIN code.

*For Metal Doors: Please use the T4x19 screws instead of FH1x 30

(Timber Doors).

(Use on indoor side)

Installation Template S-480

Please check measurements

when printing template

83mm

58mm

FH1x 30 (5pcs)

FH1x 30 (3pcs)

Screw

Otros manuales para S-480

Tabla de contenidos

Otros manuales de Cerrar de Schlage

Schlage

Schlage CO-100 Manual de usuario

Schlage

Schlage CO-Series Manual de usuario

Schlage

Schlage HDB Manual de usuario

Schlage

Schlage CONNECT Instrucciones de montaje

Schlage

Schlage BE469 Manual de usuario

Schlage

Schlage BE365 Manual de usuario

Schlage

Schlage MPC Cobra Series Manual de usuario

Schlage

Schlage AL25D Series Manual de usuario

Schlage

Schlage AD-200 Manual de usuario

Schlage

Schlage LE Instrucciones de montaje

Schlage

Schlage SchlageTouch BE375 Manual de usuario

Schlage

Schlage AD-Series Manual de usuario

Schlage

Schlage BE365 Manual del propietario

Schlage

Schlage AD-200 Manual de usuario

Schlage

Schlage CONNECT Manual de usuario

Schlage

Schlage FA Series Manual de servicio

Schlage

Schlage AD-402 Manual de usuario

Schlage

Schlage FE595 Manual de usuario

Schlage

Schlage Touchscreen Deadbolt with Alarm Manual de usuario

Schlage

Schlage CM5100-FSA-KPI Manual de usuario

Schlage

Schlage J Series Hoja de especificaciones

Schlage

Schlage L9000 Series Manual de usuario

Schlage

Schlage ND72 Manual de usuario

Schlage

Schlage BE489WB Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario