schildknecht DATAEAGLE 2 Compact Series Guía
Installation and commissioning manual
Wireless Data System
DATAEAGLE 2XXX Compact®
Schildknecht AG
D -71711 Murr – Haugweg 26
Phone ++49 (0)7144 89718-0 - Fax ++49 (0) 7144 8971829
DATAEAGLE 2XXX Compact V2
Version: 07.04.2014
Installation and commissioning DATAEAGLE 2XXX Compact
© Copyright
Schildknecht AG
All rights reserved.
No part of this publica-
tion may be reproduced
or translated in full or in
part without prior written
permission.
Right to make changes
Changes may be made
at any time to the form,
equipment and technol-
ogy of items covered in
this documentation. For
this reason, no claims
relating to the aforemen-
tioned may be derived
from the information,
illustration and descrip-
tions provided in these
operating instructions for
appliances or systems
manufactured after the
date of issue of these
operating instructions.
Warranty
Schildknecht AG can
accept no liability for in-
direct damage or direct
damage, incidental
damage, consequential
damage or compensa-
tion for expenses in-
curred by performance
of contract which arise
from delivery, provision
and use of this material.
Introduction
The technical description of the wireless data systems from
Schildknecht AG consists of an operating instruction for all
product families and an installation and commissioning man-
ual for each product family. Please read both documents
carefully before you start working with the wires data sys-
tems. Both documents should be considered as a single enti-
ty.
You are here
The operating instruction is intended to help you familiarize
yourself with the structure and function of wireless data sys-
tems.
Here you get general information about the complete prod-
uct family. Please read the operating instructions first if you
are not familiar with the structure and function of wireless da-
ta systems.
Installation and commissioning DATAEAGLE 2XXX Compact
Next, read the installation and commissioning manual of the
wireless data system.
To start with, we have a few important things to say about
safety. Please observe these instructions without fail, in order
to avoid property damage and personal injury.
We show you step by step how to install the system, put it in-
to operation and how to operate it.
Any questions? First, have a look in the table of contents.
You will quickly find what you are looking for.
If you do need us in person: just call us or send a fax:
Schildknecht AG
Haugweg 26
D -71711 Murr
Phone
+49 / (0) 7144 89718-0
Fax
+49 / (0) 7144 8971829
Internet
www.schildknecht.ag
e-mail
FAX
WWW
e-mail
Installation and commissioning DATAEAGLE 2XXX Compact
List of contents
Subject Page no.
Introduction
1.General information 1-1
1.1.Guide to symbols 1-1
1.2.Copyright and brand names 1-1
1.3.Declaration of conformity and EC directives 1-1
2.Safety instructions 2-1
2.1.Intended use 2-1
2.2.General information 2-1
2.3.Installations instructions 2-2
2.4.Safety instructions for operation 2-2
2.5.Personnel qualification 2-3
3.Structure 3-1
3.1.System description 3-1
3.2.Radio module 3-3
3.3.I/O module 3-5
4.Installation of new devices 4-1
4.1.Overview Installation 4-1
4.2.Configure DIL switches 4-2
4.2.1.DIL switches for I/O modules with 6 digital I/Os 4-3
4.2.2.DIL switches for I/O modules with 8 digital I/Os 4-4
4.2.3.Example for DIL switch configuration for I/O modules
with 6 digital inputs 4-5
4.3.Install unit on top-hat rail 4-6
4.4.Install antenna cable 4-7
4.5.Install I/O plug 4-8
4.6.Connect power supply 4-8
Installation and commissioning DATAEAGLE 2XXX Compact
5.Extension and exchange 5-1
5.1.Preparation 5-1
5.1.1.System requirements 5-1
5.1.2.Create a new folder 5-1
5.1.3.Microsoft Internet Explorer 5-2
5.1.4.Install USB drivers 5-3
5.1.5.Install Dataeagle Wizard 5-6
5.2.Extension 5-7
5.2.1.Configure DIL switches 5-8
5.2.2.Set address switch 5-8
5.2.3.Install module on top-hat rail 5-9
5.2.4.Install I/O plug 5-10
5.2.5.Connect power supply 5-10
5.2.6.Start Dataeagle Wizard and configure I/O module 5-11
5.3.Exchange 5-16
5.3.1.Remove the wiring 5-17
5.3.2.Remove the old module 5-17
5.3.3.Configure DIL switches – only I/O modules 5-18
5.3.4.Set address switch - only I/O modules 5-18
5.3.5.Install module on top-hat rail 5-18
5.3.6.Install I/O plug or antenna cable 5-19
5.3.7.Connect power supply 5-19
5.3.8.Start Dataeagle Wizard 5-20
5.3.9.Which one is the Master, and which one the Slave? 5-21
5.3.10.Configure radio module 5-24
6.Dismantling and disposal 6-1
7.Tips and Tricks 7-1
7.1.Improving the EMC safety 7-1
7.1.1.Introduction 7-1
7.1.2.Basic guidelines 7-1
7.2.Guidelines for optimized installation of antennas 7-5
7.3.Advices for troubleshooting 7-7
8.Technical specifications 8-1
Installation and commissioning DATAEAGLE COMPACT 2XXX 1-1
Chapter 1 – General information
1. General information
1.1. Guide to symbols
This section contains an explanation of the symbols used in
this manual.
Indicates an imminently hazardous situation which, if not
avoided, may result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
Indicates sections which contain important information.
Indicates work operations which need to be carried out.
This symbol is followed by a description about how the status
of the system changes after an operation has been carried
out.
1.2. Copyright and brand names
Brand names and product names mentioned in this manual
are trademarks or registered trademarks of their respective
owners.
Microsoft Windows 7, Windows Vista, Windows 2000, Win-
dows XP and Microsoft Internet Explorer are registered
trademarks of Microsoft Corp.
Adobe Reader is a registered trademark of Adobe Systems
Corp.
DATAEAGLE® is a registered trademark of Schildknecht AG.
1.3. Declaration of conformity and EC direc-
tives
Information about the declaration of conformity and about EC
directives can be found under:
http://www.schildknecht.info/dokumente/doc.pdf
CAUTION
Installation and commissioning DATAEAGLE COMPACT 2XXX 2-1
Chapter 2 - Safety instructions
2. Safety instructions
2.1. Intended use
Information about the intended use can be found in the oper-
ating instructions wireless data systems DATAEAGLE.
2.2. General information
In order to guarantee safe use and fault-free operation, the
according safety instructions have to be observed under all
circumstances.
Safety instructions which apply to all product families are de-
scribed in the operating instructions for wireless data sys-
tems DATAEAGLE. This manual is part of the system docu-
mentation. Read these instructions before installation and
commissioning of the wireless data system.
Safety instructions which apply only to an individual wireless
data system are described below and in the according sec-
tion of this installation and commissioning manual.
Installation and commissioning DATAEAGLE COMPACT 2XXX 2-2
Chapter 2 - Safety instructions
2.3. Installations instructions
Country licenses can be found in the attached declara-
tion of conformity.
Risk of electrical shock.
Always disconnect the modules from the power source
when working on the modules (installation, etc.)!
Risk of injury.
Comply with the local regulations and safety instruc-
tions during installation!
Static charges can damage electronic devices.
Remove electrostatic discharge from your body before
touching the device!
The modules must not be opened or modified (except
the steps described in this manual). Do not repair the
module yourself, replace it with an equivalent module.
Repairs may only be carried out by the Schildknecht AG.
The Schildknecht AG is not liable for damage resulting
from a failure to comply.
2.4. Safety instructions for operation
Electromagnetic radiation.
Keep at least a distance of 20 cm to the antennas when
the devices are in operation.
CAUTION
CAUTION
Installation and commissioning DATAEAGLE COMPACT 2XXX 2-3
Chapter 2 - Safety instructions
2.5. Personnel qualification
Only qualified personnel may carry out the following tasks:
Installation
Commissioning
Operation
Maintenance
Within the context of safety regulations, qualified personnel
are individuals authorized to commission, to ground, and to
identify equipment and systems in accordance with the safe-
ty-engineering standards.
All operating personnel must be trained accordingly.
Personnel involved with operating the unit in conjunction with
controllers must possess sound programming skills for the
individual controller and programming language in question.
Installation and commissioning DATAEAGLE COMPACT 2XXX 3-1
Chapter 3 – Structure
3. Structure
3.1. System description
The system is used for the wireless bidirectional transmission
of digital and analog signals. It consists of a radio module
and up to five I/O modules on each side.
The modules are connected together by T-bus plugs.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Sistema de micrófono de schildknecht
Manuales populares de Sistema de micrófono de otras marcas
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manual de usuario
Alpha Technologies
Alpha Technologies RBMS Manual de usuario
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manual de usuario
Shure
Shure UA844 Manual de usuario
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manual de usuario
Pyle
Pyle PDWM5000 Manual de usuario