Sceptre X370BV-FHD Manual de usuario
QUICK START GUIDE
QUICK START GUIDEQUICK START GUIDE
QUICK START GUIDE
To start watching the TV right away you must complete the
following steps :
1. Verify you have received everything
2. Attach the stand to the TV
3. Install the batteries to the remote control
. Connect power and a cable or antenna to the TV
5. Turn on your TV and scan for channels
6. Your TV is ready for viewing
1. Package Contents
1. Package Contents1. Package Contents
1. Package Contents
SCEPTRE X37 LCD TV Display x 1
TV Stand x 1
User Manual x 1
Power Cord x 1
arranty / Registration Card x 1
X37 Remote Control (AAA Batteries included) x 1
HDMI Cable x 1
2. Attaching
2. Attaching 2. Attaching
2. Attaching and
andand
and Removing
Removing Removing
Removing the T Stand
the T Standthe T Stand
the T Stand
1. Please handle the TV with two or more people. Please locate a large flat surface (i.e. table) and put a soft cloth (i.e.
blanket) on the surface. Please set the TV facing up on the flat surface so the panel does not get damaged.
2. Please connect the stand to the TV and secure the connection with a screw driver and the 6 screws included in the
accessory box. You can screw them in from the bottom of the stand. DO NOT over tighten the screws when
installing the stand; otherwise the stand’s threading will become stripped.
3. To remove the stand and neck for wall mounting, simply remove the 5 screws on the back of the TV and you can
slide the neck off.
3. Installing Batteries to the Remote
3. Installing Batteries to the Remote3. Installing Batteries to the Remote
3. Installing Batteries to the Remote
Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the
batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the battery cover.
Please note:
•
THE REMOTE FOLLOWS SONY’S UNIVERSAL REMOTE CODE. You need to find the actual code
from the company that supplied your universal remote.
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal
injury.
• Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal
injury.
• Dispose the batteries in accordance with local laws and regulations.
• Keep the batteries away from children and pets.
• If the remote control is not used for a long time, remove the batteries.
• Keep the remote control away from moisture, sunlight, and high temperatures.
4. Connecting Your Cab
4. Connecting Your Cab4. Connecting Your Cab
4. Connecting Your Cables
lesles
les
The following picture offers a suggestion for connecting most of your audio video equipment.
5. Ready to Watch Some T ?
5. Ready to Watch Some T ? 5. Ready to Watch Some T ?
5. Ready to Watch Some T ?
Starting up the
Starting up the Starting up the
Starting up the X37
X37X37
X37 LCD HDT
LCD HDT LCD HDT
LCD HDT
1. Make sure your power cable is connected and the standby red light in the front of the TV is lit up.
2. Check all your connection cables off the side or the back of your TV and also your AV devices. Make sure they
are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.
If
If If
If Y
YY
You
ouou
ou Have
Have Have
Have Connected Antenna or Cable to the T …
Connected Antenna or Cable to the T … Connected Antenna or Cable to the T …
Connected Antenna or Cable to the T …
If an antenna or cable is connected to your TV’s ATSC/NTSC port, you will need to use the source button on the remote
control or the source button on the right side of the TV to switch to TV (Cable / Air) and auto-scan for channels.
1. Open up the OSD by pressing the MENU button on the remote control.
2. Make sure CHANNEL is highlighted; if not please use the ◄ or ► buttons to select CHANNEL then press the
▼
direction button to switch to ANTENNA.
3. Use the ◄ or ► buttons to select the options AIR or CABLE.
4. If you have an antenna connected to the X37 LCD HDTV, please select AIR.
5. If you have cable connected to your X37 LCD HDTV, please select CABLE.
6. Once you have made the selection, press the ▼ button to highlight the AUTO SCAN function and press ↵
↵↵
↵ to
start scanning for channels.
7. Once the scanning is done, you can watch the TV.
Please Note :
• Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for
more information.
• The cable system should be left to AUTO for the TV to auto detect which cable system you have.
•
The X37 LCD HDTV’s tuner is designed for HDTV therefore requires a stronger signal than normal
TVs. If you cannot achieve that signal level with your antenna or cable, your X37 LCD HDTV might
lose picture or sound.
Call Us If You Need Help!
Call Us If You Need Help! Call Us If You Need Help!
Call Us If You Need Help!
Products are often returned due to a technical problem rather than a defective product that may result in
unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem
over the phone or email. For more information on warranty services or repairs after the warranty period,
please contact our support department at the number below.
For technical help, contact our Sceptre Technical Support Group via email or phone. Please have your
Sceptre p/n number, serial number, and date of purchase available before you call.
Tech Support E-mail : [email protected]om
Customer Service Email : [email protected]
TEL : 1800-788-2878
Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM (PST)
16800 East Gale Ave.
City of Industry, CA 91745
TEL : 626-369-3698
FAX : 626-855-5711
ebsite : www.SCEPTRE.com
Otros manuales para X370BV-FHD
2
Este manual sirve para los siguientes modelos
1
Otros manuales de TELEVISOR de Sceptre
Sceptre
Sceptre X32 Series Manual de usuario
Sceptre
Sceptre U55 Series Manual de usuario
Sceptre
Sceptre X42 Manual de usuario
Sceptre
Sceptre X325BV-FMDR Manual de usuario
Sceptre
Sceptre E24 Manual de usuario
Sceptre
Sceptre U515CV-UMKR Manual de usuario
Sceptre
Sceptre X322BV-SRR Manual de usuario
Sceptre
Sceptre X37SV-NAGA Manual de usuario
Sceptre
Sceptre E328BV-MDC Manual de usuario
Sceptre
Sceptre E325BV-HDU Manual de usuario
Manuales populares de TELEVISOR de otras marcas
Philips
Philips Colour Television Manual de usuario
Toshiba
Toshiba 27A10 Manual de usuario
Philips
Philips 42PF9630A/37 Manual de usuario
Hitachi
Hitachi 32FX48B Manual de usuario
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario
Changhong Electric
Changhong Electric uhd55b6000is Manual de usuario
