Scandomestic K 62 Hoja de especificaciones
Ceramic Hob
Instruction Manual / Installation Manual
MODEL: K 62
2
Congratulations on the purchase of your new Ceramic Hob.
We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand how to install correctly and operate it.
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.
Product Overview
Top View
1. max. 1200 W zone
1 4 2. max. 1800 W zone
3. max. 1200 W zone
5 4. max. 1000/2200 W zone
2 3 5. Glass plate
6. Control panel
6
Control Panel
1. ON/OFF control
2. Power regulating controls
3. Keylock control
4. Timer regulating controls
5. Dual zone control
3
Product Information
The microcomputer ceramic cooker hob can meet different kinds of cuisine
demands because of resistance wire heating, micro-computerized control and
multi-power selection, really the optimal choice for modern families.
The ceramic cooker hob centers on customers and adopts personalized design.
The hob has safe and reliable performances, making your life comfortable and
enabling to fully enjoy the pleasure from life.
Before using your New Ceramic Hob
•
Read this guide, taking special note of the ‘Safety Warnings’section.
•
Remove any protective film that may still be on your ceramic hob.
Using the Touch Controls
•
The controls respond to touch, so you don’t need to apply anypressure.
•
Use the ball of your finger, not its tip.
•
You will hear a beep each time a touch is registered.
•
Make sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them. Even a thin film of water may make the
controls difficult to operate.
Choosing the right Cookware
Do not use cookware with jagged edges or a curved base.
4
Make sure that the base of your pan is smooth, sits flat against the glass, and is
the same size as the cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob –do not slide, or they may scratch the glass.
Using your Ceramic Hob
To start cooking
•
After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the ceramic hob has entered the state of standby
mode.
1.
Touch the ON/OFF control. all the indicators
show “-“
2.
Place a suitable pan on the cooking zone that
you wish to use.
•
Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
5
3.
Select a heat setting by touching the “-“ or
“+” control.
•
If you don’t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
•
You can modify the heat setting at any time
during cooking.
•
By holding down either of these buttons, the
value will adjust up or down.
When you have finished cooking
1.
Turn the cooking zone off by scrolling down to “ 0 “ or touching “-“ and
”+” control together.
6
2.
Turn the whole cooktop off by touching
the ON/OFF control.
3.
Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an energy
saving function if you want to heat further pans, use the hotplate that is still hot.
Locking the Controls
•
You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
•
When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The timer indicator will show “ Lo “
To unlock the controls
1.
Make sure the ceramic hob is turned on.
2.
Touch and hold the keylock control for a while.
3.
You can now start using your ceramic hob.
When the hob is in the lock mode, all the controls are disable except the
ON/OFF, you can always turn the ceramic hob off with the ON/OFF
control in an emergency, but you shall unlock the hob first in the next
operation
7
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic
hob. When an excessive temperature is monitored, the ceramic hob will stop
operation automatically.
Residual Heat Warning
When the hob has been operating for some time, there will be some residual
heat. The letter “ H ”appears to warn you to keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shut down. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times are shown in
the table below:
Using the Timer
You can use the timer in two different ways:
•
You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
•
You can set it to turn one cooking zone off or more than one after the set time is
up.
•
You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1.
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not selecting any cooking
zones.
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
8
2.
Adjust the timer setting by touch the “-“ or “+”
controls. The minute minder indicator will start
flashing and will show in the timer display.
Hint: Touch the “-“ or “+” control of the timer
once to decrease or increase by 1 minute.
Touch and hold the “-“ or ”+” control of the timer to decrease or
increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
3.
Touching the”-“ and “+” together, the timer is cancelled, and the”--“will
show in the minute display.
4.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
5.
Buzzer will beep for 30 seconds and the timer indicator
shows “- - “ when the setting time finished.
Setting the timer to turn one cooking zone off
1. Touch the - or + of the corresponding cooking
zone you want to set the timer for.
9
2.
Set the time by touching the control of the timer
Hint: Touch the “-“ or “+” control of the timer
once will decrease or increase by 1 minute.
Touch and hold the “-“ or “+” control of
the timer will decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
3.
Touching the “-”and “+” together, the timer is cancelled, and the will show “--”
in the minute display.
4.
When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
Using the Dual zone function
•The function only work in 4# cooking zone
•
The dual cooking zone has two cooking areas that you can use a central section and
an outer section. You can use the central section (A) independently or both
sections (B) at once.
10
Activate the Dual zone
1.Select a heat setting by touching the “-”or “+”control.
2.Adjust the heating setting between power levels 1 and 9
(e.g. 6)
3.Central section of the dual cooking zone will switch on.
4.Touching the dual zone control “◎” , you can activate
the outer section as well.
5.A neon above the dual cooking zone control will light
6.The cooking zone indicator show “P”and “”
alternately.
Deactivate the Dual zone
1.Touching dual zone control “◎” again, the dual zone
function is deactivated.
2.The cooking zone indicator show
“
6
”
.
Cooking Guidelines
Cooking Tips
•
When food comes to the boil, reduce the power setting.
•
Using a lid will reduce cooking times and save energy by retaining the heat.
•
Minimise the amount of liquid or fat to reduce cooking times.
•
Start cooking on a high setting and reduce the setting when the food has heated
through.
Simmering, cooking rice
•
Simmering occurs below boiling point, at around 85˚C, when bubbles are just
rising occasionally to the surface of the cooking liquid. It is the key to delicious
Otros manuales para K 62
1
Tabla de contenidos
Idiomas:
Otros manuales de Quemador de Scandomestic
Scandomestic
Scandomestic IKF160-1 Manual de usuario
Scandomestic
Scandomestic IKF 180-1 Manual de usuario
Scandomestic
Scandomestic K 52 Manual de usuario
Scandomestic
Scandomestic K 62 Manual de usuario
Scandomestic
Scandomestic IKF 285 Manual de usuario
Scandomestic
Scandomestic K 51 Manual de usuario
Scandomestic
Scandomestic K 61 Manual de usuario
Scandomestic
Scandomestic IKP 60 Manual de usuario
Scandomestic
Scandomestic K51 Manual de usuario
