SATO V2 Manual de usuario
About This Manual
2
Table of Contents
About This Manual..................................................................................................... 4
Legal Information....................................................................................................... 5
Copyrights...........................................................................................................................................5
Limitation of Liability...........................................................................................................................5
Trademarks......................................................................................................................................... 5
Software Updating Disclaimer............................................................................................................6
Introduction.................................................................................................................7
Overview............................................................................................................................................. 7
Features..............................................................................................................................................8
Supported Models............................................................................................................................ 10
Getting Started......................................................................................................... 11
Installation.........................................................................................................................................11
Opening the Application................................................................................................................... 12
Navigating the Application................................................................................................................13
Adding Printers to the Printer List....................................................................................................18
Adding a Printer Connected via TCP/IP (LAN/Wi-Fi) Interface.................................................. 19
Adding a Printer Connected via Bluetooth Interface...................................................................21
Pairing the Printer With Android Device.......................................................................................... 23
Operating on the Printer Screen............................................................................ 24
Configuring Printer Directly From the Printer Screen...................................................................... 29
Uploading Files From the Printer Screen........................................................................................ 36
Font Upload (Printer Screen)......................................................................................................38
Uploading a Font to the Printer (Printer Screen)...................................................................38
Managing the Installed Fonts (Printer Screen)......................................................................42
Package Upload (Printer Screen)............................................................................................... 45
Performing Test Print From the Printer Screen............................................................................... 48
Performing Test Print Using the Test Print Template (Printer Screen)........................................50
Performing Test Print Using the Designated File (Printer Screen)............................................. 51
Sending SBPL Commands From the Printer Screen...................................................................... 53
Various Functions on the Send SBPL Screen............................................................................55
Entering the SBPL Command Manually and Sending the Command to the Printer (Printer
Screen)........................................................................................................................................ 56
Sending the SBPL Command File to the Printer (Printer Screen)..............................................59
Various Functions of the Application.................................................................... 61
Printer Configuration.........................................................................................................................62
Creating Printer Configuration File..............................................................................................64
Previewing the Printer Configuration File.............................................................................. 69
Saving the Printer Configuration File.....................................................................................71
Applying the Configuration File................................................................................................... 75
Configuring Printer Connected via TCP/IP (LAN/Wi-Fi) From the Printer List....................... 78
Configuring Printer Connected via TCP/IP (LAN/Wi-Fi) By Entering IP Address
Manually................................................................................................................................. 80
3
Configuring Printer Connected via Bluetooth From the Printer List.......................................82
Configuring Printer Connected via Bluetooth From the Paired Bluetooth Device List........... 84
Configuring Printer Connected via Bluetooth by Entering Bluetooth Address Manually........ 85
Configuring Printer via NFC Interface....................................................................................86
Configuring Printer Directly......................................................................................................... 88
File Upload....................................................................................................................................... 96
Font Upload.................................................................................................................................99
Uploading a Font to the Printer............................................................................................. 99
Managing the Installed Fonts...............................................................................................103
Package Upload........................................................................................................................ 106
Clone Configuration........................................................................................................................109
Creating a Clone Configuration File......................................................................................... 112
Applying the Clone Configuration............................................................................................. 114
Test Print.........................................................................................................................................117
Performing Test Print Using the Test Print Template................................................................ 120
Performing Test Print Using the Designated File......................................................................122
Send SBPL..................................................................................................................................... 124
Various Functions on the Send SBPL Screen..........................................................................127
Entering the SBPL Command Manually and Sending the Command to the Printer................. 128
Sending the SBPL Command File to the Printer......................................................................131
Contact Us.............................................................................................................. 133
4
About This Manual
Thank you for using the SATO Mobile All-In-One Tool application.
This document describes only the information and instructions related to Mobile All-In-One Tool
functions. For more details on other printer operations and settings, please refer to each printer’s
operator manual.
Symbols
This document uses the following symbols:
Item Description
Warning
The Warning symbol indicates that you can cause death or serious injury
if you do not follow the instructions or procedures.
Caution
The Caution symbol indicates that you can cause injury or property
damage if you do not follow the instructions or procedures.
Note
The Note symbol indicates useful and supplemental information that you
should know.
Reference
The Reference symbol indicates the link of relevant information.
• Reproduction in any manner of all or part of this document is prohibited.
• The contents of this document may be changed without prior notice.
• Great care has been taken in the preparation of this document, but if any problems,
mistakes, or omissions are found, please contact your SATO reseller or technical
support center.
5
Legal Information
Copyrights
Any unauthorized reproduction of the contents of this document, in part or whole, is strictly prohibited.
© 2023 SATO Corporation. All rights reserved.
Limitation of Liability
SATO Corporation and its subsidiaries in Japan, the U.S. and other countries make no representations
or warranties of any kind regarding this material, including, but not limited to, implied warranties of
merchantability and fitness for a particular purpose. SATO Corporation shall not be held responsible
for errors contained herein or any omissions from this material or for any damages, whether direct,
indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use
of this material.
Specifications and contents in this document are subject to change without notice.
Trademarks
• The following are registered trademarks of SATO Holdings Corporation and its subsidiaries in
Japan, the U.S. and other countries.
◦ SATO
◦ Stylized SOS (SATO Online Services)
• QR Code is a registered trademark of DENSO WAVE INCORPORATED.
• Android is a trademark of Google LLC.
• iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used
under license.
• Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
•Wi-Fi® is a registered trademark of Wi-Fi Alliance.
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and
other countries.
• All other trademarks are the property of their respective owners.
6
Software Updating Disclaimer
While all efforts have been taken to ensure the accuracy and currency of the information contained
herein, there are instances where the contents of this document may be outdated. In that case,
proceed to your local SATO regional website (https://www.sato-global.com/drivers/redirect.html) to
check whether an updated document has been made available for your reference.
7
Introduction
Overview
The Mobile All-In-One Tool is a mobile version of the SATO All-In-One Tool printer management utility.
It allows users to configure SATO printers seamlessly using mobile devices, supporting both Android
and iOS operating systems. (*iOS is under development and is not supported at this moment until
further notice.)
The application allows users to configure their printers via TCP/IP (for printers connected via LAN
or Wi-Fi), Bluetooth, or NFC interface, providing them with a convenient and flexible solution for
managing their printers on the go.
The diagram below illustrates how the application communicates with SATO printers. The printers
shown here are for illustrative purposes only. Please refer to your printer model for the availability of
interfaces.
With its intuitive interface and comprehensive feature set, the Mobile All-In-One Tool is an essential
tool for anyone who needs to manage their SATO printers from their mobile device.
8
Features
The Mobile All-In-One Tool allows you to actively manage your SATO printers from an Android device
with the following features.
Manage SATO Printers From the Printer List
The [Printer] page provides an easy way for users to add and manage their SATO printers.
On this page, users can add their printers connected via TCP/IP (LAN or Wi-Fi), or Bluetooth, and
configure various printer settings in real-time. Users can also download files to the printer, perform
test prints, and send SBPL commands.
With each printer's connection information saved, users can connect to the printer easily without
re-entering the connection information.
Refer to Printer Page for more details on the operation.
Printer Configuration
◦ Users can create a new configuration file based on the selected printer model and save it to
the Android device.
◦ With the configuration file saved in the Android device, users can easily apply the same
configuration to their SATO printers of the same model via TCP/IP (for printers connected
via LAN or Wi-Fi), Bluetooth, or NFC interface. When configuring the printer using the
NFC interface, please ensure that the printer is turned off due to its behavior. The received
configuration data will be applied when the printer is turned on.
Applying the same printer configuration to multiple printers of the same model can be made
more efficient by using this function. In particular, it is possible to set up printers without
removing them from the packaging box at the distribution center, warehouse, or customer
site.
◦ Users can also directly configure a selected printer connected via TCP/IP (LAN or Wi-Fi) or
Bluetooth interface.
Refer to Printer Configuration for more details on the operation.
File Upload
Users can upload custom fonts to printer's memory, thus optimizing print strings and enhancing
overall throughput.
Furthermore, it is possible to upload the clone configuration onto the printer in a PKG format file or
install the AEP package to the printer.
This functionality enables authorized SATO technical personnel to also install printer firmware or
firmware patch to the printer.
Refer to File Upload for more details on the operation.
9
Create and Apply the Clone Configuration
Users can clone printer-specific settings from one printer to another printer of the same series,
thus saving time in printer configuration. This is useful when you are setting up multiple printers
with the same settings.
Refer to Clone Configuration for more details on the operation.
Test Print
The Test Print function enables you to perform a trial printing on a printer that is connected to your
Android device. You have the option to choose between printing a test template or specific files.
Refer to Test Print for more details on the operation.
Send SBPL
This function allows users to send SBPL commands to the selected printer and receive response
from the printer.
Refer to Send SBPL for more details on the operation.
Multiple Interface Connectivity
The application can remotely manage SATO printers connected via TCP/IP (LAN or Wi-Fi) on the
same local network or using a Bluetooth interface.
10
Supported Models
The following models of SATO printers* are supported by the current version of the Mobile All-In-One
Tool:
• CL4NX/CL4NX Plus/CL4NX-J/CL4NX-J Plus series
• CL6NX/CL6NX Plus/CL6NX-J/CL6NX-J Plus series
• CT4-LX/CT4-LX-J/HC4-LX series
• FX3-LX_Ln
• PW208NX/PW208mNX
• PW4NX
• S84NX/S86NX series
* Printer availability differs across countries or regions. Please contact your SATO reseller or technical
support center for more information.
Mobile All-In-One Tool is undergoing continual refinement, and it is expected that other SATO printer
models will be supported in the future, in line with customer demand.
• NFC interface is installed for all CL4NX-J/CL6NX-J printer series (Japan version) and
CL4NX/CL6NX printer series serial number starts with 6B or newer (overseas version).
Please note that the functions are available for the CL4NX/CL6NX printer series only
with the serial number starting with 6B or newer for overseas versions, and the printer
firmware version must be 1.8.0-r8 or newer.
Tabla de contenidos
Otros manuales de Impresora todo en uno de SATO
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
