Satel FD-1 Manual de usuario

FD-1

WATER FLOOD DETECTOR

fd1_en 09/17

The FD-1 detector senses the presence of water leaks or flooding in rooms with plumbing.

This manual applies to the detector with electronics version 1.4 (or newer).

1. Features

External flood sensor.

Supply voltage control.

LED indicator.

Tamper protection against cover removal and tearing enclosure from the wall.

2. Description

The alarm is triggered approximately 4 seconds after the water level

reaches the height at which the flood sensor electrodes are installed.

During the alarm condition the relay contacts are open and the LED

is ON. The alarm ends a few seconds after the water level drops

below the height at which the flood sensor electrodes are installed.

Supply voltage control

In the event of a prolonged voltage drop below 9 V (±5%), the

detector will signal a trouble. The trouble is indicated by the

activation of alarm relay and the steady light of LED indicator. The

trouble signaling will continue as long as the trouble persists.

Electronics board

terminals:

+12V - power input.

COM - common ground.

TMP - tamper output (NC).

NC - alarm output (NC relay).

tamper contact.

LED indicating the relay status. It lights red when the relay is

open.

pins for enabling/disabling the LED indicator. The LED indicator

is enabled when jumper is placed on the pins.

terminals for the flood sensor connection.

3. Installation

Disconnect power before making any electrical connections.

The detector is designed for indoor operation.

1. Select the place where the detector is to be installed.

2. Open the detector enclosure (Fig. 2).

3. Make the wire entry opening in the enclosure base.

4. Run the wires through the opening made.

2 FD-1 SATEL

5. Pull the flood sensor wires through the hole in the enclosure.

6. Use screws to fix the enclosure base to the mounting surface (Fig. 4). Wall plugs (screw

anchors) and screws are included in the detector delivery set.

7. Connect the wires to the detector terminals.

8. Close the detector enclosure.

9. Test the detector for proper operation, by submerging the flood sensor in water.

10.Secure the flood sensor wires and the flood sensor itself (Fig. 5). The detector is now

ready for work.

4. Specifications

Supply voltage .................................................................................................12 V DC (±15%)

Standby current consumption ........................................................................................ 2.5 mA

Maximum current consumption ......................................................................................... 4 mA

Relay contacts rating (resistive load) .............................................................. 40 mA / 16 V DC

Flood sensor cable length....................................................................................................3 m

Environmental class.................................................................................................................II

Operating temperature range.............................................................................-10 °C...+55 °C

Enclosure dimensions................................................................................... 26 x 112 x 29 mm

Weight.................................................................................................................................81 g

The declaration of conformity may be consulted at www.satel.eu/ce

SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND

tel. +48 58 320 94 00

www.satel.eu

Tabla de contenidos

Otros manuales de Sensor de seguridad de Satel

Satel

Satel SX6-TO Manual de usuario

Satel

Satel SLIM-PIR-LUNA-PET Manual de usuario

Satel

Satel COBALT Manual de usuario

Satel

Satel MAGENTA Manual de usuario

Satel

Satel MAGENTA Manual de usuario

Satel

Satel COBALT Manual de usuario

Satel

Satel SLIM-DUAL-PRO Manual de usuario

Satel

Satel AQUA RING S Manual de usuario

Satel

Satel TD-1 Manual de usuario

Satel

Satel AQUA RING S Manual de usuario

Satel

Satel APMD-150 Manual de usuario

Satel

Satel APMD-250 Manual de usuario

Satel

Satel AQUA S Manual de usuario

Satel

Satel MAGENTA Manual de usuario

Satel

Satel AFD-100 Manual de usuario

Satel

Satel GRAPHITE Manual de usuario

Satel

Satel XD-2 Manual de usuario

Satel

Satel ASD-110 Manual de usuario

Satel

Satel SILVER Manual de usuario

Satel

Satel ARD-100 Manual de usuario

Satel

Satel SLIM-PIR-PRO Manual de usuario

Satel

Satel OPAL Plus Manual de usuario

Satel

Satel AGD-200-BR Manual de usuario

Satel

Satel micra MXD-300 Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario

Solinst

Solinst 301 Manual de usuario