SANY SY26U Manual de usuario
SY26U
QUICK
START
GUIDE
SY26U QUICK START GUIDE
01
SY26U Display
12
13
14
15
06
07
01 Date and Time
02 Engine Pre-heat
03 Battery Charge Light
04 Machine Locked Out
05 EVI Signal
06 Engine Hour Display
07 Engine Coolant
Temperature Gauge
08 Menu
09 2 Speed Travel
10 Not Used
11 Not Used
12 Maintenance Service Light
13 Error Code Alarm
14 Fuel Level Gauge
15 Tool Selected
16 Soft Keys
01 02
16
03 04 05
08091011
1 2 3 4
02
Tool Select
01
02
2. The function list
will be displayed.
Using Soft Key 1,
scroll across until
Operating Mode is
highlighted and
press Soft Key 3.
3. Using Soft Key 1,
scroll through the
list until the tool
required is
highlighted then
press soft key 3 to
select the tool.
1. To access the tool
selection menu,
press Soft Key 4.
1 3
Tool Selection
• Bucket • Hammer
• Grab • Tilt Bucket
• Flail • Shear
• Shear/Rotate • Auger
SY26U QUICK START GUIDE
03
To scroll up and down
the list, use the up
and down arrows.
To access the flow
adjustment use the
gear symbol to select.
Use Soft Key 1 to
increase (+) & Soft
Key 2 to decrease (-).
Once the required flow
rate is set ALWAYS
press the tick to save
changes (Soft Key 3).
Using Soft Key 1 scroll
to the tool that needs
setting up. Once the
tool is highlighted
press the Tick icon to
save the selection.
To set the Aux flow
rate, press Soft Key 1
to scroll though the list
to the required
implement. Select the
implement by pressing
Soft Key 2.
Flow Rate Set Up
*All flow figures on display are guidelines and flow adjustments should be confirmed with a flow meter.
1 2 3
04
Quick Hitch Operation
When the attachment is fitted release the red button
and the hitch will lock.
Use Soft Key 4 to return out of the Operating Mode
screen.
1. To access the quick hitch guide, press and hold the red
button on the back of the left-hand control lever.
Once the quick hitch control page opens activate the
quick coupler with Soft Key 1.
Activate the unlock function with Soft Key 2, at this
point the hitch will not unlock.
Press and hold the red button on the rear of the
left-hand control level and crowd the bucket in.
Only when the bucket is crowded all the way in will the
hitch unlock.
Whilst still holding the red button attach the next
attachment.
4
01
1 2
SY26U QUICK START GUIDE
05
Isolator
1. The machine
isolator key is
located in the fuel
tank/toolbox area
on the offside of
the machine.
01
06
Emergency Stop Switch
1. The Emergency Stop
Switch is located to
the left hand side of
the operators seat.
When the button is
pushed in, twist
clockwise and the
button will release.
01
SY26U QUICK START GUIDE
07
2-Way Change Over (Aux Lines)
1. The single/double acting change over valve is located in the engine bay.
01
08
Arm Rest Functions
1. Wiper Function
2. Work Lights
3. Engine RPM Control
4. Windscreen Wash
5. Rotating Amber
Beacon (first position
beacon active/travel
alarm muted. Second
position - beacon and
travel alarm active)
6. Ignition Barrel
03
06
01 02
04 05
SY26U QUICK START GUIDE
09
Heater Control
The Heater Fan control
is located below the
display on the
right-hand side of the
machine.
Otros manuales para SY26U
1
Tabla de contenidos
Otros manuales de Excavador de SANY
SANY
SANY SY195C9 Guía de instalación
SANY
SANY SY26U Manual de usuario
SANY
SANY SY215C LC Manual de usuario
SANY
SANY SY60C Manual de usuario
SANY
SANY SY115C9 Guía
SANY
SANY SY365C LC Manual de usuario
SANY
SANY SY50U Manual de usuario
SANY
SANY SY155U Manual de usuario
SANY
SANY SY75 Manual de usuario
SANY
SANY SY16C Manual de usuario
