Santak CASTLE On-Line Series Manual de usuario
6K(S)/10K(S)/3C10KS
Thank you for selecting a SANTAK product to protect your
electrical equipment.
This manual contains important instructions that you
should follow during installation and maintenance of the
UPS and batteries. Please read all instructions before
operating the equipment and save this manual for future
reference.
Safety Instructions
Please read carefully the following user manual and the
safety instructions before installing or operating the unit!
Operation Safety
1. Please read all instructions before operating the equipment and
connecting to mains power, save this manual for future reference.
2. Please pay attention to all the warning indication, understand and
follow all the instruction.
3. Do not install the UPS where it would be exposed to direct sunlight ,
Rain or damp environment.
4. Do not install the UPS near to heating equipment or heating source
and heating environment.
5. Do not block ventilation openings on the UPS’s housing. Ensure
the air vents on the front, side and rear of the UPS are not blocked.
Recommended at least 50cm of space on each side.
6. Use dry cloth for cleaning.
7. Use dry-chemical fire extinguisher when UPS present fire danger,
do not use fluid-fire extinguisher, fluid- fire extinguisher will cause
hazards shock.
Electricity Safety
Do not remove the enclosure. This system is to be serviced by qualified
service person only. There are NO USER SERVICEABLE PARTS inside
the UPS.
1. Assure UPS is reliably connected to earth properly verify
connecting wire and battery polarity is correct before turn on UPS
with mains power.
2. If UPS requests moving to another place or reconnecting power
wire, it is imperative to disconnect all the power connections of
UPS, and turn off UPS.
3. Please used the UPS accessories specified by SANTAK.
4. Shock Risk.
If equipment powered by UPS require any type of maintenance, it
is imperative to disconnect it from UPS before maintenance.
If input or output terminal need any maintenance or installation, it is
imperative to disconnect all the power connections of UPS and turn
UPS off.
BATTERY SAFETY
1. The service lifetime of UPS battery depends on ambient temperature,
high ambient temperature will impact the service lifetime of UPS battery.
Replace battery on regularly can help to keep UPS running efficiently
and provide backup time as expected.
2. Batteries must be maintained and replaced only by qualified person.
3. Batteries have a high short-circuited current and pose a risk of shock.
Take all precautionary measures specified below and any other
measures necessary when working with batteries:
A. remove all jewellery, wristwatches, rings and other
metal objects.
B. use only tools with insulated grips and handles.
C. Wear rubber gloves and boots.
D. Do not lay tools or metal parts on top of batteries.
E. Disconnect the charging source prior to connecting or
disconnecting battery terminals.
4. Do not attempt to dispose of batteries by burning them. It could cause
explosion.
5. Do not open or destroy batteries. Effluent electrolyte can cause injury to
the skin and eyes. It may be toxic. If cause injury by Effluent electrolyte,
use cool water for washing and go to hospital ask for help immediately.
6. Do not short the battery with metal objects, It could cause an electric
shock, fire or explosion.
Maintenance
1. The operation environment and store environment will impact on
the service lifetime and reliability of UPS.
Do not install or store the UPS in the places where are listed
below.
A. Do not install UPS in place where the ambient temperature
lower than 0℃ or higher than 40℃.
B. Do not install/store UPS in place where the relative humidity
lower than 20% or higher than 90%.
C. Do not install/store UPS in place where there is flammable
or corrosive gas, place with large amounts of conductive
dust, place exposed to shock or vibration, or outdoor.
2. If you would store the UPS for a long period, the storing area
temperature should be the range of -25°C to 55°C, and before
turning on UPS, it is highly suggested to put UPS in the ambient
temperature above 0°C and last at least 2 hours.
CONTENT
1. INTRODUCTION ................................................................................. - 1 -
1.1 SYMBOL AND EXPLANATION ................................................................ - 2 -
1.2 FRONT VIEW ...................................................................................... - 2 -
1.3 REAR VIEW ....................................................................................... - 3 -
1.4 PRODUCT SPECIFICATION ................................................................... - 5 -
2. INSTALLATION ................................................................................... - 7 -
2.1 INSPECTION THE PACK AND EQUIPMENT. .............................................. - 7 -
2.2 POWER CABLE. .................................................................................. - 7 -
2.3 UPS POWER CONNECTION ................................................................ - 8 -
2.4 EBM CONNECTING AND INSTALLATION .............................................. - 11 -
2.5 UPS CONNECT TO COMPUTER PORT ............................................... - 12 -
2.6 UPS PARALLEL CARD (OPTIONAL) ................................................... - 13 -
2.7 EPO(OPTIONAL) ............................................................................. - 17 -
2.8 MAINTENANCE SWITCH(OPTIONAL) ................................................... - 18 -
2.9 USB PORT(OPTIONAL) .................................................................... - 18 -
2.10 CONNECTIVITY CARDS( OPTIONAL) ................................................ - 19 -
2.11 SOFTWARE .................................................................................... - 20 -
3. CONTROL & DISPLAY PANEL ........................................................ - 22 -
4. OPERATION ...................................................................................... - 26 -
4.1 TURN ON UPS ................................................................................. - 26 -
4.2 TURN OFF ....................................................................................... - 29 -
5. MAINTENANCE ................................................................................ - 30 -
6. TROUBLE SHOOTING ..................................................................... - 31 -
- 1 -
1. Introduction
The Castle On-Line-Series is an uninterruptible power supply
incorporating double-converter technology. It provides perfect protection
specifically for Computer equipment, communication systems and industry
control systems.
The double-converter principle eliminates all mains power
disturbances. A rectifier converts the alternating current from the socket
outlet to direct current. This direct current charges the batteries and
powers the inverter. On the basis of this DC voltage, the inverter generates
a pure sinusoidal AC voltage, which permanently supplies the loads.
Computers and periphery are thus powered entirely by the mains
voltage. In the event of power failure, the maintenance-free batteries
power the inverter. In the event of inverter failure/Overload, UPS transfer
to bypass mode, after the failure/overload remove, UPS transfer to inverter
mode continue supplies the loads.
This manual covers the UPS listed as follows. Please confirm
whether it is the model you intend to purchase by performing a visual
inspection of the Model No. on the rear panel of the UPS.
C6K: Single phase input single phase output, Standard with battery.
C6KS: Single phase input single phase output, can work with external
EBM to get longer backup time.
C10K: Single phase input single phase output, Standard with battery.
C10KS: Single phase input single phase output, can work with external
EBM to get longer backup time.
3C10KS: Three phase input single phase output, can work with external
EBM to get longer backup time.
- 2 -
1.1 Symbol and Explanation
Some or all of the following symbols may be used in this manual. It is
advisable to familiarize yourself with them and understand their meaning:
1.2 Front view
C6K/C10K C6KS/C10KS/3C10KS
- 3 -
1.3 Rear View
C6K C10K
C6KS C10KS
Otros manuales para CASTLE On-Line Series
1
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Fuente de alimentación de Santak
