SANLI GT 26 Manual de usuario
PLEASE KEEP THIS MANUAL IN A SAFE PLACE
Petrol Trimmer
www.sanli.co.uk
2 / Operator’s Manual Sanli GT26
Summary
1. Introduction........................................................................................................ 4
2. Safety instructions ............................................................................................. 5
2.1 Safety labels and symbols .......................................................................5-6
2.2 Before using the petrol trimmer................................................................... 7
2.3 When using the petrol trimmer.................................................................8-9
2.4 After using the petrol trimmer...................................................................... 9
3. Usage Guidelines .............................................................................................. 9
3.1 Preparation of the petrol trimmer............................................................... 10
3.11 Setting up the petrol trimmer.................................................................. 10
3.12 Filling up with fuel .................................................................................. 11
3.2 Using the petrol trimmer............................................................................ 12
3.21 Starting the trimmer ..........................................................................12-13
3.22 Stopping the trimmer.............................................................................. 13
3.23 Adjusting the cutting wire during use ..................................................... 13
3.24 Advice for cutting ................................................................................... 14
3.25 Changing the nylon line ......................................................................... 14
3.3 Cleaning, storage, transport and maintenance.......................................... 15
3.31 Cleaning the petrol trimmer.................................................................... 15
3.32 Storing and transporting the petrol trimmer............................................ 15
3.33 Transporting and maintaining the thermal edge trimmer...................15-16
4. Technical Characteristics................................................................................. 17
5. Troubleshooting................................................................................................ 18
6. Environmental Protection................................................................................ 19
7. After sales service........................................................................................... 19
8. Warranty ......................................................................................................... 20
9. Declaration of Conformity................................................................................ 21
Warranty registration card..................................................................Back of Manual
Operator’s Manual Sanli GT26 / 3
Model GT26
DETAILED DESCRIPTION OF THE PETROL TRIMMER
1
Spark plug lid
8
Safety trigger
2
Start/Stop switch
9
Priming pump
3
Lower handle
10
Recoil starter handle
4
Trimmer Head
11
Air filter cover
5
Shield
12
Choke lever
6
Safety handles
13
2 stroke petrol tank
7
Throttle control
14
Single harness
4 / Operator’s Manual Sanli GT26
1. Introduction
Thank you for choosing our product and congratulations on purchasing your
new SANLI thermal edge trimmer. We are confident that this equipment,
when properly maintained, will give you years of trouble-free operation and
you will be able to fully appreciate its quality, performance and comfort.
This thermal edge trimmer has been designed and manufactured with utmost
care and in accordance with strict standards of safety, reliability and ease of
use of SANLI products.
Please read this manual carefully and familiarise yourself with all the controls
of the thermal edge trimmer before using it for the first time.
Please adhere strictly to all warnings, explanations and instructions given in
this manual for the safe and optimal use of this tool.
KEEP THIS MANUAL IN A SAFE PLACE
Operator’s Manual Sanli GT26 / 5
2. Safety instructions
Your petrol trimmer should always be used in accordance with this user
manual
2.1 Safety labels and symbols
IMPORTANT: Some of the following symbols may be used on the
tool.Please study them and learn their importance.Correct
interpretation of these symbols will result in efficient use and reduced
risks.
Danger! Warning! Caution!
This symbol indicates a danger, a warning or a caution. It
indicates that the operator's safety is at risk.
Read the instruction manual
The instruction manual contains information intended to
draw attention to possible safety issues, the risk of
deterioration to the tool as well as helpful tips for getting
started, use and maintenance. Please respect all the
warnings, explanations and instructions given in this
manual for safe and optimal use of this tool.
Risk of debris
There is a risk of debris being thrown from the trimmer
during use.
Secure the tool
Turn the trimmer off and place the Start/Stop switch in the
STOP position before carrying out any cleaning, transport
or maintenance or while you leave it unsupervised.
Disconnect the spark plug cap.
Keep a safe distance
The operator is responsible for the safety of others located
in the working area of the tool. Do not use the trimmer
while others, especially children or pets, are nearby.
6 / Operator’s Manual Sanli GT26
Wear protective gloves
Wear hard, anti-slip shoes
Wear eye and ear protection
Fuel
Use only “2 stroke mixture” (petrol oil)..
Operator’s Manual Sanli GT26 / 7
2.2 Before using the petrol trimmer
Carefully read this user manual.
Familiarise yourself with how this tool works and learn to use it correctly
Never allow the tool to be used by other people (especially children) who
have not read the instruction manual.
If the tool must be given to other people, give them the instruction
manual.
Never remove labels or safety elements.
Check the petrol and oil ratio corresponds to the recommended amounts
(see section 4 technical characteristics).
Make sure that the nylon spool, the fixing and safety elements are in good
working order before each use. Replace any parts which are missing or
which have suffered excessive use.
Never use the trimmer if the safety features are missing or damaged.
Never modify the basic engine settings and do not overwork it.
Do not start trimming if there is risk of damaging electrical or telephone
wires, buildings or fittings.
Only start trimming when the work zone is cleared and cleaned. Keep the
workspace clean and tidy to reduce the risk of accidents.
When using the tool for the first time, it is recommended that the user is
accompanied by an experienced person.
This device is only designed to be used to trim the edges of lawns or small
grassy areas. Any other uses which are not specifically permitted in the
manual are not authorised, can cause damage to the tool and may put the
user at serious risk.
The device must never be used:
- In enclosed premises
- For public or professional areas (parks, sporting venues, roads,
agricultural or forest areas, etc.)
- In an intensive way
- By children under the age of 16
- By non-accompanied minors.
8 / Operator’s Manual Sanli GT26
2.3 When using the petrol trimmer
Only use the trimmer in broad daylight or with good artificial lighting.
The use of motorised tools may be subject to regulation. Please respect
any legal regulations, which may differ from one location to another.
Do not use the tool when the grass is wet. Only use the thermal edge
trimmer in dry weather
Do not use the tool if you feel tired or unwell. Also, avoid use if you have
consumed alcohol or if you have taken medication. A momentary lapse of
attention can lead to serious injuries.
Do not wear baggy clothing during use. Never work in bare feet or while
wearing light sandals. Always wear long trousers, sturdy anti-slip shoes
and wear protective gear such as gloves, safety glasses and ear protection.
The user is responsible for the safety of other people in the tool’s
operating zone. Do not user the trimmer when there are other people,
especially children or animals, nearby. Check that there is no one who
could be injured by flying debris while trimming.
Always keep both hands on the handles while using the thermal edge
trimmer.
Keep hands and feet away from the cutting area and moving parts
When trimming, avoid obstacles such as fences, branches and stakes
which cannot be cut by the tool and which might damage the
cutting system.
If the tool becomes snagged, stop the motor.
Always work while in a stable, balanced and sturdy position. Do not work
on very steep slopes.
Don’t overload the machine. Always use the appropriate tool for the work
to be carried out.
Guide the machine at a walking pace and move forward slowly. Never
run. Do not walk backwards while using the machine to avoid falling over.
While using the tool, keep the wire head in its normal working position,
under the deflector and parallel to the ground.
Never leave the motor running unattended.
Never start the thermal motor in enclosed areas where harmful carbon
monoxide gas might accumulate.
Operator’s Manual Sanli GT26 / 9
To avoid the risk of explosion, do not use the thermal edge trimmer in
areas where there are flammable materials such as liquids, gas or dust.
In order to avoid fire risk, do not start the machine close to refuelling
areas
WARNING: Some parts of the engine are very hot and can cause severe burns. In
particular, do not touch the motor or the exhaust pipe.
2.4 After using the petrol trimmer
Before carrying out any maintenance, make sure that the Start/Stop switch
is in the STOP position, and check that the nylon spool has completely
stopped. Remove the spark plug cover.
Do not transport the thermal edge trimmer unless the engine is stopped,
the Start/Stop switch is in the STOP position and the nylon spool has
completely stopped.
Remove any cutting debris and clean any dirt from the thermal edge
trimmer before putting it away.
Always follow the maintenance instructions.
After each use, check that the safety features are functioning properly, that
the cutting tool is firmly in place and that the parts remain in good condition.
Maintain the tool and replace all worn or damaged parts.
Only have your trimmer repaired by qualified personnel and only use original
parts or those approved by SANLI UK.
Keep the trimmer clean and always store it unplugged, in a dry place, out
of the sun and out of reach of children.
Keep this user manual in a safe place and consult it every time you use this
tool.
3. Usage Guidelines
Modifications not authorised by SANLI can render the tool dangerous and
may lead to serious injuries during use. SANLI UK will not accept any liability
for any type of misuse or for any use which does not conform to these
instructions or to current regulations.
WARNING: All cleaning, transport and maintenance operations must be carried
out with the motor off and the Start/Stop switch in the STOP position.
10 / Operator’s Manual Sanli GT26
3.1 Preparation of the petrol trimmer
WARNING: Do not use the edge trimmer unless it is fully assembled!
3.11 Setting up the petrol trimmer
Unpack all the parts carefully and make sure that there are no parts
missing. Make sure that all parts function properly.
Fix the lower handle to the tube by positioning it under the main handle
according to your height, and fix it in place by screwing the four fixing
screws (fig. 1).
WARNING: Check that the lower handle is installed properly, with the safety arm
facing your legs. For a right-handed person, the safety arm will be installed
toward the left; for a left-handed person, the safety arm will be towards the
right.
Assemble the whole of the deflector-cutting
spool at the end of the tool’s tube, as shown
in figure 2, making sure that the flexible
transmission inside the tube is properly
inserted into the support square of the spool.
Screw in the two fixing screws according to
their length, checking that the metallic guide
is attached, as shown in figure 3.
Fix the deflector with the long screw and the
wing nut as shown in figure 4.
Metallic guide Long screw Wing nut
Fixing screw
Tabla de contenidos
Otros manuales de Recortadora de SANLI
