Sangean WFR-29D Manual de usuario

Revision 1

WFR-29D / WFR-29

中文

Contents

Introduction ...................................................................................... 2-6

Before you can use this product ...................................................... 2-3

Controls and connections ............................................................... 4-5

Navigation controls ............................................................................ 6

Network conguration ................................................................... 7-15

Connecting your radio to your computer network ......................... 7-14

Network remote control options ....................................................... 15

Internet Radio mode .................................................................... 16-28

Internet Radio-the basics ................................................................. 16

Selecting a radio station by location and genre .......................... 17-19

Searching for a radio station by name ............................................. 20

Searching a new or popular station ................................................. 21

Selecting a podcast / BBC Listen Again ........................................... 22

Presetting stations ........................................................................... 23

Display modes ................................................................................. 24

Customizing your radio .................................................................... 25

Selecting favorite stations ........................................................... 26-28

Music Player mode ...................................................................... 29-44

Use with Windows, Apple Mac and Linux ........................................ 29

Accessing your les via UPnP .................................................... 30-31

Locating and playing media les using UPnP .................................. 32

Media selection ................................................................................ 33

Controlling playback ................................................................... 34-35

Display modes ................................................................................. 36

Playlists ...................................................................................... 37-39

Wake On LAN .................................................................................. 40

Prune servers .................................................................................. 40

Windows 7 ‘Play to’ function (UPnP renderer) ............................ 41-42

Using USB memory devices ....................................................... 43-44

DAB mode .................................................................................... 45-52

Selecting a DAB radio station .......................................................... 46

Display modes ................................................................................. 47

Finding new DAB radio stations ...................................................... 48

Manual Tuning ................................................................................. 49

Dynamic Range Control Settings ..................................................... 50

Station order setup .......................................................................... 51

Prune stations ................................................................................. 52

FM mode ....................................................................................... 53-58

Manual tuning ............................................................................. 54-55

Scan setting ..................................................................................... 56

Stereo / Mono switching ................................................................... 57

Presetting stations in DAB and FM modes ...................................... 58

Clock and Alarms ......................................................................... 59-68

Automatically updating the clock ...................................................... 59

Setting the clock format ................................................................... 60

Manually setting the clock ........................................................... 61-62

Setting the alarm clock ............................................................... 63-65

Snooze timer .................................................................................... 66

Disabling alarms .............................................................................. 66

Sleep timer ....................................................................................... 67

Inactive standby ............................................................................... 68

Display and Auto .......................................................................... 69-74

Equalizer function ............................................................................ 69

Brightness control and Contrast / viewing angle control ............. 71-72

Headphone socket and Line out socket ........................................... 73

Auxiliary input socket ....................................................................... 74

Information ................................................................................... 75-83

Factory reset .................................................................................... 75

Software update ............................................................................... 76

Network proles ............................................................................... 77

Software version display and Audio FAQ ......................................... 78

Accessing your audio files via a UPnP server using Windows Vista

and XP ........................................................................................ 79-80

Audio codecs ................................................................................... 81

Cautions and Specications ....................................................... 82-83

Before you can use this product

Before you can use your internet radio, you must have the following:

● A broadband Internet connection (not required for DAB, FM or Music

Player functions).

● A wireless access point (WiFi) connection connected to your broadband

Internet Service Provider, preferably via a router. In many cases the

broadband modem, router and wireless access point will be a single

combined unit supplied by your Internet Service Provider or bought

from a computer store.

● If your wireless network is congured to use Wired Equivalent Privacy

(WEP) or WiFi Protected Access (WPA/WPA2) data encryption then

you either need to know the WEP, WPA or WPA2 key used for encryption

so you can get the internet radio to communicate with the network, or

your router needs to offer WiFi Protected Setup (WPS).

If connecting using WiFi, the internet radio will typically work within a

10-20 metre radio from your wireless access point. The actual range

achieved will depend upon the building type, other nearby wireless

network, and possible interference sources. DAB and FM radio

functions can operate wherever the internet radio is able to receive a

suitable broadcast signal.

IMPORTANT:

Before you continue, make sure that your wireless access point or

router is powered up and working with your broadband Internet service

(use your computer to verify this). To get this part of the system working

you must read the instructions supplied with the wireless access point

or router.

Battery operation

Battery operation using alkaline batteries

1. Remove the battery cover on the rear of the unit by pressing the catch.

Note:

Before you insert the batteries, if you use non-rechargeable batteries,

make sure the NiMH/Alkaline switch which located inside the battery

compartment is switched to Alkaline position. If you use rechargeable

batteries, make sure to switch NiMH/Alkaline switch to NiMH position.

2. Insert four UM-1 (D size) batteries into the spaces in the compartment.

3. Take care to ensure all batteries are inserted with correct polarity as

shown on the rear cabinet. Replace the battery cover.

4. Reduced power, distortion and a “stuttering sound” are all signs that

the batteries need replacing.

5. If the radio is not to be used for any extended period of time, it is

recommended that the batteries are removed from the radio.

Battery operation using rechargeable batteries

1. Slide the battery switch to the NiHM position.

2. Insert 6 UM-2 batteries into spaces in the compartment. Make sure

all batteries are inserted with the correct polarity as shown on the

rear cabinet. The radio is also designed to be used with NiMH

rechargeable batteries.

Note:

Do not use a mix of old and new rechargeable batteries.

Do not use a mix of full and empty rechargeable batteries.

Do not use batteries that have a different mAh capacity

Do not use damaged or leaking batteries

3. Make sure the radio is switched off and connected to the AC adaptor.

When the charge indicator flashes yellow indicating batteries are

charging. Batteries will be fully charged in around 10 hours. The battery

shows steady yellow light when the battery charging is complete.

Note:

Duration for charging your battery fully can be varied according to

the mAh capacity of a battery. Higher mAh batteries required longer

charging time.

Using the AC power adaptor

The AC power adaptor required for this unit should be 12 volts DC at 1A

center pin positve.

Insert the adaptor plug into the DC socket on the left side of the radio.

Plug the adaptor into a standard mains socket outlet.

Whenever the adaptor is used, the batteries are automatically

disconnected. The AC adaptor should be disconnected from the main

supply when not in use.

Controls and connections

1. USB memory socket

2. Mode button

3. LCD display

4. Info button

5. Menu button

6. Back button

7. Forward button

8. Standby button

9. Battery charge indicator / Low battery indicator

10. Tuning Control Rotary / Select knob

11. Volume Control Rotary / Mute

12. Preset 5 / Stop button

13. Preset 4 / play / pause button

14. Preset 3

15. Preset 2 / Rewind button

16. Preset 1 / Fast-forward button

17. Loud speaker

18. Handle

19. FM telescopic aerial

20. Auxiliary input jack

21. Line out jack

22. Headphone jack

23. DC in jack

24. Alkaline / NiMH / NiCad rechargeable battery switch

Navigation controls

This page describes the basic means of controlling your WFR-29D internet radio.

Instructions for each operating mode are given in the later section of this book.

1. Pressing the Standby button brings your radio out of Standby mode. Pressing Standby while

the radio is in use will cause it to return to the Standby mode with the clock display.

2. Pressing the Mode button gives you access to each of the operating modes in turn: Internet

Radio, DAB+ radio, Music player, FM radio and Auxiliary Input.

3. Pressing the Menu button will access the menu system, whereas the Info button allows the

display of information relating to the radio station or music le being played.

4. Many operations require the user to make a selection from the menu. Highlight the menu item

using the Tuning Control Rotary on the right side of the radio. Press the Tuning Control Rotary

to select that item. If there are more than ve items in a menu, then the display will automatically

scroll up or down so that the additional items become visible. A sliding bar on the right will give

an indication showing the current portion of the menu that is displayed. If there are many items

in a menu, then the radio allows the menu to “wrap around” in either direction. This can make

it easier to reach items at the end of a long menu, such as a list of countries or Internet radio

stations.

5. If an error is made when navigating the menus, it is generally possible to go back to a higher

level menu by pressing the Back button.

Conguration

Connecting your radio to your computer network

1. Place your radio on a at surface and plug the mains lead into the mains socket located on the

left side of your radio ensuring that the plug is pushed fully into the socket.

2. Plug the other end of the mains lead into the wall socket and switch on the wall socket.

IMPORTANT: The mains plug is used as the means of connecting the radio to the mains supply.

The mains socket used for the radio must remain accessible during normal use.

In order to disconnect the radio from the mains completely, the mains plug should be removed

from the mains socket outlet completely.

3. When you apply power, the display on the radio will light up and say: ‘SANGEAN’ and ‘STARTING’

with a progress indicator. The rst time that you use your radio (or after Factory Reset) the

display will show “Setup wizard” and “YES” will be highlighted on the screen. Press the Tuning

Control Rotary to start the setup wizard. The screen will ask if you wish to run the setup wizard

again at the next start up. This will lead to the main menu.

4. Rotate the Tuning Control Rotary on the right hand side of the unit to highlight the desired

clock format (either 12 or 24 hour) then press the Tuning Control Rotary to enter your selection.

A menu allowing you to specify the auto update option for the clock will appear on the display.

The default of ‘Update from Network’ will be the best option for most users.

SANGEAN

3,4

5. Rotate the Tuning Control Rotary to choose an auto-update option for the clock. This can be

updated from DAB or FM radio, from the Network, or not updated. The default is to auto update

from the network. If you choose any other option, go to step 8. Otherwise you will rst need to

select the correct time zone and daylight savings setting, see steps 6 and 7. If you choose

“No update” you will need to set the clock manually later( see the section of ‘Manually setting

the clock’). Press the Tuning Control Rotary to conrm your choice.

6. Rotate the Tuning Control Rotary to highlight the time zone which is applicable to your location.

Press the Tuning Control Rotary to enter the setting.

7. You will then need to set the Daylight Savings option according to your location (Daylight

Savings is also known as Summer/Winter time ). Rotate the Tuning Control Rotary to highlight

“YES” to turn on daylight savings if required or ‘NO’ if you do not wish to use daylight savings

then press the Tuning Control Rotary to conrm the setting.

8. The display will then show a list of WiFi regional options for the network set up. Rotate the

Tuning Control Rotary to highlight the required region and then press the Tuning Control

Rotary to select it. Your radio will then scan for available WiFi networks.

9. The radio will enter the Network Settings Wizard and will display ‘Scanning…’. After a short

while the display will show a list of the available WiFi networks.

[Manual config]

5-8

10.

11.

12.

13.

You will first need to identify your network in the list of network names presented by the

Network Wizard. If no networks are found then you may have to get your wireless router wor-

king (please see the instructions supplied with it) or you may be too far from the router.

When the radio nds your wireless network, it displays the Network Name (SSID) for the wi-

reless access point on the screen. This is a name that is allocated to the access point in your

router by the person who set up the network – for example: ‘Jones family’ or ‘Paul’s network’.

If the router supports WiFi Proteced Setup, then ‘[WPS]’ will be shown in front of the SSID. It

is possible, and in some locations highly likely, that your radio will nd more than one wireless

network, in which case you should choose which one you need to connect to.

Rotate the Tuning Control Rotary to see the SSID for each wireless network that has been

found. If your network is shown proceed to step 14. If it is not shown then proceed to step 12.

If you make a mistake at any point, use the Back button to go back to the previous screen.

If your network is not found, it may be because the router is congured not to broadcast the

SSID. You should then use the Tuning Control Rotary to highlight and select the ‘[Manual

cong]’ option in order to enter the network details manually. This is described in ‘Manual

Network Conguration”. If your network name is being broadcast, and it was not found, then

try re-scanning press the Back button), and if necessary try moving your radio to a location

closer to your access point / router.

When the SSID for the wireless network you wish to connect to is highlighted on the screen,

press the Tuning Control Rotary. If WiFi Pretected Setup (WPS) was indicated, you will see

an additional menu at this point, otherwise proceed to step 14. choose one of the WPS menu

options as required for your router (WPS may be via push button, or using an identication

number).

‘Push Button’ – the display prompts you to press the WPS button on your router and then

the Select button on the radio. The two devices should then connect with the encryption key

sent automatically to the radio.

‘PIN’ – the display shows an identication number which you must enter into your router

using a web browser (refer to your router’s user documentation). You should then press the

Select button on the radio.

‘Skip WPS’ – if you wish to enter the encryption key yourself (or if it was previously Entered).

If you choose Push Button or PIN the screen will then show ‘Connecting…’ and then ‘Setup

wizard completed’. Press the Tuning Control Rotary to exit setup wizard.

11-13

11,12

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Radio DAB de otras marcas

Goodmans

Goodmans GCDR1955DAB Manual de usuario