Sandstrom SWHP12 Manual de usuario
Instruction Manual
Digital Wireless Stereo Headphones
SWHP12
SWHP12_IB_final120621.indd 1 21/06/2012 10:13 AM
SWHP12_IB_final120621.indd 2 21/06/2012 10:13 AM
Contents
Unpacking.....................................................................................................................................................4
Product Overview........................................................................................................................................5
Connections..................................................................................................................................................6
Installing and Charging the Batteries......................................................................................................8
Operations ....................................................................................................................................................9
Pairing......................................................................................................................................................... 10
Automatic Shut O................................................................................................................................... 10
Hints and Tips............................................................................................................................................ 11
Safety Warnings........................................................................................................................................ 12
Thank you for purchasing your new Sandstrøm digital wireless stereo
headphones.
Please check that you have all the items and familiarise yourself with this
instruction manual.
SWHP12_IB_final120621.indd 3 21/06/2012 10:13 AM
4
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so
according to any local regulations.
The following items are included:
Headphones
Mains Adapter x 1
P.N.: 25-030603E-09
Transmitter
P.N.: DH104ET-01S-1
RCA to 3.5mm Cable x 1
P.N.: 42-06-DS082T-06
AA Rechargeable Batteries x 2
(NiMH 800mAh 1.2V)
P.N.: 79-01-12801A-13
Instruction Manual
P.N.: 95-08-DH1040E-02
3.5mm to 6.3mm
Adapter x 1
P.N.: 41-03-35TO63PG-07
RCA to 3.5mm Adapter
Cable x 1
P.N.: 43-03-YCABLE-06
VOL+
PAIR
VOL-
If items are missing or damaged, please contact Partmaster(UK only).
Tel: 0844 800 3456 for assistance.
SWHP12_IB_final120621.indd 4 21/06/2012 10:13 AM
5
Product Overview
Transmitter Front View
Headphones
Transmitter Rear View
1. Signal / Charge Indicator
2. Pair Button
3. Audio Input Sockets
4. DC In Socket
5. Battery Cover
6. Volume +/– Control
• Switch this button to
increase / decrease the
volume
Pairing Button
• Press this button for pairing
7. Power / Signal Indicator
8. On / O Button
VOL+ PAIR VOL-
5
6 87
12 3 4
SWHP12_IB_final120621.indd 5 21/06/2012 10:13 AM
6
Connections
RCA to 3.5mm Adapter Cable (included)
RCA Cable (not included)
RCA to 3.5mm Cable (included)
Transmitter
red white
Stereo System
for 6.3mm socket
for 3.5mm socket
for 3.5mm plug
for RCA socket
Mains Adapter (included)
A
B
CD
3.5mm to 6.3mm
Adapter (included)
SWHP12_IB_final120621.indd 6 21/06/2012 10:13 AM
7
1. Connect the transmitter to your stereo system by using one of the following methods:
AUse a RCA cable (not included) to connect the transmitter’s audio input sockets to
the RCA sockets of your stereo system.
BUse the RCA to 3.5mm adapter cable (included) to connect the transmitter’s audio
input sockets to the 3.5mm plug extended from your stereo system.
CUse the RCA to 3.5mm cable (included) to connect the transmitter’s audio input
sockets to the 3.5mm socket of your stereo system.
DConnect the 3.5mm to 6.3mm adapter (included) to the RCA to 3.5mm cable
(included). Then connect it to the transmitter’s audio input sockets and the 6.3mm
socket of your stereo system.
2. Connect the mains adapter to the transmitters DC in socket and then to the mains socket.
• Choose a suitable place near your audio source (e.g. TV, stereo or home cinema system).
Avoid placing the transmitter close to metal objects such as shelf bars, reinforced concrete
walls, etc. as this can decrease the transmitter’s range.
• Other wireless devices may interfere with the transmitted signal, please locate the
transmitter at least 1 metre away from other transmitting devices.
• The transmitting signal is less eective through solid walls, please ensure a direct line of
sight to the transmitter.
SWHP12_IB_final120621.indd 7 21/06/2012 10:13 AM
8
Installing and Charging the Batteries
1. Remove the battery cover and insert 2 x rechargeable AA batteries (included) into the
battery compartment. Replace the battery cover.
2. Switch o the headphone and place it into the transmitter contacts touching the charge
pins. Red LED ashes when charging is activated. Charge the batteries for 16 hours before
initial use.
SIZE AA
SIZE AA
VOL+
PAIR
VOL-
VOL+
PAIR
VOL-
• Please ensure the headphones are well placed on the transmitter so that the Signal Charger
Indicator ashes red, showing charging is in progress.
• When the batteries are empty, it takes approximately 5 hours to fully charge the batteries.
• When the batteries are fully charged, the headphones can be used for up to 8 hours.
• Please insert the batteries with the correct polarity.
• Only use the included rechargeable shortened sleeve NiMH batteries with your
headphones. Other types of rechargeable batteries cannot be charged with this system.
• AA Alkaline batteries can be used to operate the headphones, but cannot be charged with
this system.
SWHP12_IB_final120621.indd 8 21/06/2012 10:13 AM
9
Operations
To start up this system and enjoy your music, please follow the steps below:
1. Connect the transmitter with your audio source.
2. Connect the mains adapter to the transmitter and then a mains socket. The LED on the
transmitter will illuminates Red. Turn on your audio source.
3. Turn on the headphones receiver by pressing the ON/OFF button. The LED will illuminate
Red.
4. If the LED on the headphones is OFF immediately, put the headphones back on the
transmitter for recharging.
5. When the audio link is established the LED illuminates Green and your music will now
play through the headphones. The operation range of this wireless headphone is up to 50
metres (open area).
6. The LED on the headphones will ash Red if the battery power is low.
7. Turn OFF the headphones when you have nished listening to your music.
• Turn up the volume level of your audio source to at least 80%.
• Turn the volume level of your headphones to lower level before putting them on to prevent
causing damage to your ears.
SWHP12_IB_final120621.indd 9 21/06/2012 10:13 AM
10
Automatic Shut Off
To protect the transmitter and save power, the transmitter will automatically switch o after
approximately 4 minutes if there is no audio signal, or the signal that it receives from the audio
source is too weak. If however the signal returns to an acceptable level, then the transmitter will
automatically switch back on.
The headphones receiver will automatically shut o if no signal is received from the transmitter
after 15 minutes.
Pairing
If the LED on the headphones remains Red and the headphones do not work, start the Pairing
process by pressing the Pair button for 3 seconds on the transmitter and the headphones
simultaneously until the LED ashes green. The LED will stop ashing and illuminate solid green
when the pairing process is nished.
SWHP12_IB_final120621.indd 10 21/06/2012 10:13 AM
Tabla de contenidos
Otros manuales de Auriculares de Sandstrom
