Samsung WF397UTPAGR Manual de usuario

Fast Track Trouble shooting

Model:

Bulletins:

ASC20140514001

Publication # SM WF397

Production Date: 09/15/14

WF397UTPAGR

QUICK TEST MODE – PRESS: SPIN SOIL

LEVEL POWER Together - 3 Seconds

WITH POWER OFF

SERVICE MODE – PRESS: EXTRA RINSE SIGNAL Together - 3 Seconds

WITH POWER ON (& MACHINE IN USE)

All LED’s light up Beep Sound when entered.

Displays software version for a sec and Clear EEprom.

When the version is displayed, turn the Jog-Dial so that

the version disappears.

Press the following keys to test the various components.

Temp Key Water Valve Test

Spin Key Door Lock/Unlock Test

Soil Key Water Heater Test

Signal Key Drain/Bubble Pump Test

QUICK TEST MODE

The washer must be on to go into the Service Mode.

The motor speed will be displayed when started

To exit Service Mode, press Signal + Extra Rinse Keys for

3 second again, or Power Key. If no key is pressed

during service mode after 5 minutes, the machine will

return to normal user mode.

Refer to page 2 for a list of checks available

SERVICE MODE

WARNING!!!

ENTERING QUICK TEST MODE BEFORE ENTERING SERVICE MODE WILL DELETE STORED ERROR CODES

SERVICE MODE

QUICK SPIN TEST - Press the PRE WASH + SOIL Level Keys for 3 seconds.

Cannot enter once the washing cycle has started (will not spin with water in tub).

Unit starts spinning and reaches to its maximum RPM then speed drops immediately.

To hold speed press the START PAUSE (will hold for 10 minutes then revert back to QUICK SPIN TEST MODE.

Exit test same way as entered.

CYCLE COUNT CHECK - Press the SIGNAL Key during Service Mode.

When the SIGNAL key is pressed, the total number of washings will light up and a signal LED will glow.

The maximum number of cycles will be 9999 before recounts. Exit test same way as entered

SOFTWARE VERSION CHECK - Press the SOIL LEVEL key during Service Mode

Example: AE49 (AE is Micom code, 49 is it’s software version). Exit test same way as entered

FAST TIME DOWN - Press the TEMP key during Service Mode

To forward the program to the next cycle stage.

BOARD INPUT TEST - Press the EXTRA RINSE key during Service Mode

To display specific input data.

Turn the Jog-Dial to NORMAL WASH. Water Temperature will be displayed in Celsius.

Turn the Jog-Dial to HEAVY DUTY WASH. Water Temperature will be displayed in Fahrenheit.

Turn the Jog-Dial to PERMANENT PRESS. The door status will be displayed (OP if open, CL if closed).

Turn the Jog-Dial to SANITIZE. The Door Lock Switch status will be displayed (UL if unlocked, LO if locked).

Turn the Jog-Dial to BEDDING The Water Frequency will be displayed.

Turn the Jog-Dial to NIGHT WASH. The Silver-Care Status will be displayed.(defualt : “--”)

DIAGNOSTIC CODE CHECK - Press the SPIN key during Service Mode

To display stored diagnostic codes. To cycle through the diagnostic codes (d1,d2,d3~d7), turn the Jog Dial in

one direction (either Clockwise or Counterclockwise). It will then show the diagnostic codes from the latest (d1).

When turning it in the opposite direction, it shows the diagnostic codes in the reverse order.

DEMO MODE - Press the STEAM SIGNAL PURE CYCLE simultaneously for 5 seconds

Power on state only – must not be in use. Buzzer rings three (3) times “- - - -” is displayed on display other LEDs are off.

Demo mode consists of WASH, SPIN and LED modes.

Press TEMP during Demo mode, “WASH” blinks on the display and the washing machine enters WASH mode.

Press START PAUSE in WASH mode, door is locked and motor rotates left and right at 45 RPM 7 sec on and 3 sec off cycle.

WASH mode continues up to 5 minutes once started. After the 5 minutes have elapsed, “- - - -” is displayed.

Press START PAUSE during a WASH mode, “- - - -” is displayed. DEMO MODE is maintained.

Press SPIN in Demo mode, “Spin” blinks on the 7 segment display and the washing machine enters SPIN mode.

Press START PAUSE in the SPIN mode, the door is locked (Door Lock) and a spin is operated at 1200 RPM.

When the speed reaches 0 RPM, the No Spin, Low, Medium, High, and Extra High LEDs are turned on.

During a spin, the No Spin LED turns on when the speed is lower than 400 RPM.

The Low LED turns on between 400 & 700 RPM. The Medium LED turns on between 700 & 900 RPM & High LED turns on

between 900 & 1100 RPM. Extra High LED turns on at higher than 1100 RPM.

SPIN mode continues up to 4 minutes once started. After 4 minutes have elapsed, “- - - -” is displayed on the display.

Press START PAUSE during a SPIN “- - - -” is displayed on the display. DEMO MODE is maintained.

Press SOIL LEVEL during Demo mode, “LED” is displayed on the display and the washing machine enters LED mode.

Press START PAUSE in LED mode, all LEDs are turned on. The LED mode continues up to 30 seconds once started.

After 30 seconds “- - --” is displayed on the display. DEMO MODE is maintained.

Press START PAUSE during an LED mode operation, “- - - -” is displayed on the display. DEMO MODE is maintained.

MAIN PBA LAY OUT

Tabla de contenidos

Otros manuales de Arandela de Samsung

Samsung

Samsung WF218ANB Manual de usuario

Samsung

Samsung WF209 Manual de usuario

Samsung

Samsung WF455ARGSWR/AA Manual

Samsung

Samsung WW12K84 2O Series Manual de usuario

Samsung

Samsung WA54R7200AW/US Manual de usuario

Samsung

Samsung WA55A7700A Series Manual de usuario

Samsung

Samsung WF45R6100A Manual de usuario

Samsung

Samsung P1043 Manual de usuario

Samsung

Samsung WA10VP Manual de usuario

Samsung

Samsung WW7 T3 Series Manual de usuario

Samsung

Samsung WA52J8700A Manual de usuario

Samsung

Samsung WF1124ZA(C/U) Manual de usuario

Samsung

Samsung WW90H9 Series Manual de usuario

Samsung

Samsung WA17W Series Manual de usuario

Samsung

Samsung WW65T3 Series Manual de usuario

Samsung

Samsung WF0804W8E 8kg 1400rpm Ecobubble Washing... Manual de usuario

Samsung

Samsung WF10624YJV/XEG Instrucciones de uso

Samsung

Samsung WE357 series Manual de usuario

Samsung

Samsung WA85F7S6DRA Manual de usuario

Samsung

Samsung Bubble WF60F4E Manual de usuario

Samsung

Samsung WA1065D1 Manual de usuario

Samsung

Samsung WD7101CKC Manual de usuario

Samsung

Samsung WF395BTPA series Manual de usuario

Samsung

Samsung WA90F4 Manual de usuario

Manuales populares de Arandela de otras marcas

Tricity Bendix

Tricity Bendix AW 1000 W Guía del producto

Panasonic

Panasonic NA-F60L5WRB Manual de usuario

GE WSLP1500 Manual

Electrolux

Electrolux EWF1284EDW Manual de usuario

Bosch

Bosch WAN2829BSN Manual de usuario

LG TV2516DV3B Manual de usuario

LG TH2517DSAV Manual de usuario

VESTEL

VESTEL CMH-XL 7510 TE Manual de usuario

AEG

AEG 74335 Manual de operación

Johnson

Johnson JWF721A Manual de usuario

Beko

Beko WTE7604XLW0 Manual de usuario

Danby

Danby DTT100A1WDB Instrucciones de montaje

Amica

Amica WA 14 Ex Manual de usuario

Daewoo

Daewoo DWD-F1222 Manual de usuario

Bosch

Bosch WAS28461AU Manual de usuario

Miele

Miele PW 6080 Vario Manual de usuario

Finlux

Finlux FLX108CF220 Manual de usuario

Whirlpool

Whirlpool 3LBR5132AN0 Manual de usuario