Samsung Mid462-Ut2 Manual de usuario
SAMSUNG Video Wall Kit
Installation Guide
i
Contents
1.Product Overview 1 Product Feature
2 Package Contents
3 Part Names
2. Installation 4 Installation Instructions
4 Adjusting the Level
6 Arranging the Stand
6 Assembling the Monitor
10 Connecting and Arranging the Cables
3. Fixing 11 Fixing the monitor to the wall
4. Various Installation Methods 12 Basic (3x3)
12 Stair
12 Pyramid
12 Circular
13 Rectangle
5. Product Specifications (Drawing)
English
Matrix_ID-Eng.indd iMatrix_ID-Eng.indd i 2010-06-08 3:36:162010-06-08 3:36:16
1
SAMSUNG Video Wall Kit Setup Guide 1. Product Overview
1.Product Overview
Product Feature
Samsung ID 1 (MID40, MID46) : compatible with 400UX(n), 460UX(n) series●
Samsung ID 2 (MID462) : compatible with 460UT(n) series●
Interlocking Display Solution●
Multi LCD Display Solution●
Free Standing Solution●
Easy Content Management●
4-Layer stackable●
Matrix_ID-Eng.indd Sec1:1Matrix_ID-Eng.indd Sec1:1 2010-06-08 3:36:222010-06-08 3:36:22
2
SAMSUNG Video Wall Kit Setup Guide 1. Product Overview
Package Contents
SAMSUNG Video Wall Kit Main Body Front View / Back View
BRACKET-BALLAST
Quantity: 5EA
BRKT-LINK MIDDLE
Quantity: 8EA
BRACKET-LINK TOP
Quantity: 2EA
Screws (M5 x L12)
Quantity: 40EA
Screws (M6 x L15)
Quantity: 5EA
Screws (M4 x L10)
Quantity: 50EA
HOLDER WIER
Quantity: 10EA
Spanner Hinge
L-Shape Wrench (4mm)
Quantity: 1EA
BRKT-COVER
Quantity: 8EA
Matrix_ID-Eng.indd Sec1:2Matrix_ID-Eng.indd Sec1:2 2010-06-08 3:36:222010-06-08 3:36:22
3
SAMSUNG Video Wall Kit Setup Guide 1. Product Overview
Part Names
Link hole
Level Adjuster
Level Adjuster
Cable Exit
Link Fixing
Screw Hole
Cable Entrance
Level Adjuster
Link hole
Vents
Level Adjuster
Level Adjuster
Fixing Screw Hole
Link Fixing
Screw Hole
Back Cover/
Vents
Level Adjuster
Fixing Screw Hole
Matrix_ID-Eng.indd Sec1:3Matrix_ID-Eng.indd Sec1:3 2010-06-08 3:36:252010-06-08 3:36:25
4
SAMSUNG Video Wall Kit Setup Guide 2. Installation
Installation Instructions
Install the product maintaining a distance of at least 50 cm from the●
wall.
Make sure to fix the product to the floor with screws.●
2
3 4
1
When the assembly is complete, arrange the cables on the back of the stand, close the rear cover and fasten the➣
screws(M6 X L15).
Assemble the cover rear with the brkt-cover using the screw(M4 X L10), Each brkt-cover needs 3 screws.➣
2. Installation
Matrix_ID-Eng.indd Sec1:4Matrix_ID-Eng.indd Sec1:4 2010-06-08 3:36:262010-06-08 3:36:26
5
SAMSUNG Video Wall Kit Setup Guide 2. Installation
Adjusting the Level
1.
Place the product on a flat surface (floor).
2.
Level the product using the 4 Level Adjusters at the front and back of the product using the L-shape wrench.
3.
Level the product by turning the 2 Level Adjusters on both sides of the product.
4. You must the level the product using the level gauge spirit level so that the angles of the sides and the top
are within a range of 89.8~90.2 degrees.
If the vertical angle is not within the 89.8~90.2 degree range, the monitors may fall when they are piledup. Ensure➣
that the angle is within the range.
Matrix_ID-Eng.indd Sec1:5Matrix_ID-Eng.indd Sec1:5 2010-06-08 3:36:282010-06-08 3:36:28
6
SAMSUNG Video Wall Kit Setup Guide 2. Installation
Arranging the Stand
Arrange the stand in the installation shape.●
(Level each of the stands referring to the descriptions in the “Adjusting Level” section.)
If you want the monitor inclined towards you, tilt it as far as you need it to go and fix it on the floor.➣
Assemble it follwing the same steps described previously.
Assembling the Monitor
After stacking the necessary monitors on top of each other and fastening all the screws to the connectingN
parts.
To stack 3 or more monitors, two or more persons must work together.
1.
Insert the Middle Bracket-Links into the connecting pipe.
2.
Assemble the Ballast-Brackets.
Matrix_ID-Eng.indd Sec1:6Matrix_ID-Eng.indd Sec1:6 2010-06-08 3:36:292010-06-08 3:36:29
7
SAMSUNG Video Wall Kit Setup Guide 2. Installation
3. Assemble the monitors.
4. After assembling the monitors, assemble the Middle Bracket-Links and Ballast-Brackets.
5. After assembling the Middle Bracket-Links and the Ballast-Brackets, assemble the monitors.
Matrix_ID-Eng.indd Sec1:7Matrix_ID-Eng.indd Sec1:7 2010-06-08 3:36:322010-06-08 3:36:32
8
SAMSUNG Video Wall Kit Setup Guide 2. Installation
6. Assemble all the monitors (up to 4 monitors in a column) according to the same procedures, install the Top
Bracket-Link, and then fasten all the screws of the connecting parts.
7. When the arrangement is complete, fix it to the floor with the screws.
The parts used for the product assembly are as follows.N
ex) When monitors are constructed in a 2x3 stack.
Matrix_ID-Eng.indd Sec1:8Matrix_ID-Eng.indd Sec1:8 2010-06-08 3:36:392010-06-08 3:36:39
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Soporte de TV de Samsung
Samsung
Samsung WMN5870XK Manual de usuario
Samsung
Samsung WMN4277SK Manual de usuario
Samsung
Samsung WMN5090 Manual de usuario
Samsung
Samsung SADT-100EC Manual de usuario
Samsung
Samsung UHD TV Manual de usuario
Samsung
Samsung SIB-0001 Manual de usuario
Samsung
Samsung HG43AJ570 Manual de usuario
Samsung
Samsung TV Mount Manual de usuario
