Samsung SVS-5 Manual de usuario
Space for History
Thank you for purchasing a Samsung HDD Extension unit.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
ENGLISH
HDD Extension Unit SVS-5 User’s Manual
2
This is a user manual for the SVS-5 HDD Extension Unit.
The manual will deal mainly with the external dimensions & parts of the
SVS-5 HDD Extension Unit, and how to connect it to the SAMSUNG
TECHWIN’s DVR system.
• SAMSUNG TECHWIN Co., LTD. All rights reserved. Under copyright law
this manual may not be copied, in whole or in part, without the consent of
SAMSUNG TECHWIN.
• The warranty is rendered invalid in cases where the product has been
abused or mishandled, where unauthorized repairs have been attempted
or performed, or deterioration of the product is due to normal wear and
tear. Please take notice of this warning.
Notices
Resellers and users should keep in mind that this product has been
given EMC registration for business purposes.
3
• Don’t install in a humid, dirty, or dusty place.
• Don’t use in places exposed to extremes of temperature.
(Use where normal operation can be guaranteed)
•Avoid placing in direct sunlight or near heating appliances.
•Avoid places subject to vibration, or magnetic fields.
•Don’t put anything containing water (e.g. a vase or glass of water)
or anything heavy (e.g. a monitor) on top of the SVS-5 HDD
extension unit.
•Take care not to allow any objects that conduct electricity to be
inserted into the ventilation holes
•Don’t drop the product or subject it to shock.
(If an HDD is installed, the data can be damaged)
•Don’t modify or disassemble the product.
• When cleaning the product, don’t use water, but polish the surface lightly
with a dry cloth.
• If the device malfunctions, contact a dealer or service center immediately.
• This equipment is indoor use and all the communication wiring are limited
to inside of the building
*Caution
If the next articles are not followed, The fatal error can be made.
Remember it exactly!!!
1. When the DVR is connected to SVS-5, power off the DVR
certainly.
2. After power on the SVS-5, power on the DVR.
3. Don’t draw out the SATA Cable when the DVR is recording the
data to the SVS-5. ( When a power failure is happened in normal
functioning, the DVR works well with SVS-5 if power is supplied
again. )
4
Rack Mount Instruction
• If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature.
• Installation of the equipment in a rack should be such that the amount of
air flow required for safe operation of the equipment is not compromised.
• Mounting of the equipment in the rack should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
• Consideration should be given to the connection of the equipment to the
supply circuit and the effect that overloading of the circuits might have on
overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this concern.
• Reliable earthing of rack-mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct
connections to the branch circuit.
Contents
5
1. Summary
1-1 Features
1-2 Contents
1-3 Parts
2. Installation
2-1 Method of HDD installation in SVS-5
2-2 Method of SATA board installation into DVR
2-2-1 Explanation of Composition
2-2-2 Method of Assemble and Disassemble
3. Connecting to the DVR
Appendix (Specifications)
5
5
6
7
8
8
11
11
12
17
20
1. Summary
6
1-1 Features
The SVS-5 HDD Extension Unit is a 19“ rack-mount type external
storage unit using an Serial ATA (SATA) interface, so that it can be
installed easily in a cabinet with a DVR (Digital Video Recorder). It
affords excellent space saving, because a maximum of 4 SATA HDDs
may be fitted to an 1U-height chassis.
• SVS-5S : SATA board exists / SVS-5E : SATA board doesn’t exist
(SATA board is Board Assy’ which expands one DVR to a max. of
4 SVS-5 HDD Extension Units and installed into the DVR.
- 11P Method of installation)
• 1U 19“ rack-mount type chassis
• SATA-to-SATA Port MultiPlier solution
• Max. 3.0Gbps transfer rate (SATA II) – capable of CIF 480fps
recording and playback
• Max. 4 SATA HDDs support
(up to a max. 2TB in case of using 500GB SATA HDD)
• Maximizes space saving and capacity relative to cost
• Easily expansible to a very large storage pool
7
SVS-5 HDD Extension Unit chassis (1 EA)
1-2 Contents
You should find the following items in the package.
If anything is missing or broken, please inform your dealer
SATA HDD carriers (4 EA)
SATA cable (1 EA)
AC power cable (1 EA)
User’s Manual (1 EA)
Spare Screws (1 Set)
SATA Board (Enclosed in SVS-5S)
8
1-3 Parts
HandlesPower/HDD LED Ventilation holes
Power Socket
Power Fan
Cooling Fans
SATA PORT Power Switch
Connection/Action LED
SVS-5 HDD Extension Unit (front)
SVS-5 HDD Extension Unit (rear)
2. Installation
9
2-1 Method of HDD installation in SVS-5
SVS-5 HDD Extension Unit can be equipped with a maximum of 4 SATA
HDDs. Please install the disks as follows.
※Caution : HDDs suitable for use in the SVS-5 HDD Extension Unit are
Seagate (ST3250820AS 250GB, ST3500630AS 500GB). No compensation
will be made for problems resulting from use of other than the Seagate
(ST3250820AS 250GB, ST3500630AS 500GB). The warranty will be
invalidated by use of any other make of HDD.
The more HDD capacity is large, the longer the booting time of the DVR for
the confirmation of the HDD capacity.
Remove the screws from the top cover and push it back.
Prepare the enclosed SATA HDD carriers.
※Caution: There is no need to do the setting of Master/Slave in
case of SATA HDD.
1
2
10
Place the SATA HDD on the SATA HDD carrier and fix it tightly with
the screws. Use the HDD screws.
※Caution: The front and rear of the carrier are not the same.
Place the HDD in the center of the carrier.
Fix the SATA HDD carrier with its SATA HDD to the base and screw
it down with the pan head screws included. And connect the cable.
※Caution: Connect the cable tightly. Pay attention to the
direction of the cable.
3
4
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Almacenamiento de Samsung
Samsung
Samsung M471A5244CB0 Manual de usuario
Samsung
Samsung HX-DE010EB Manual de usuario
Samsung
Samsung Computer Drive Manual de usuario
Samsung
Samsung 840 PRO Series Manual de usuario
Samsung
Samsung HARD DISK DRIVE Manual de usuario
Samsung
Samsung SSD 840 PRO Manual de usuario
Samsung
Samsung RES 3.6 kWh All In One Manual de usuario
Samsung
Samsung G3 Station HX-DU020EC Manual de usuario
Samsung
Samsung HM160jc - Spinpoint 160 Gig 2.5 Inch Hard... Manual de usuario
Samsung
Samsung HD103UJ - SpinPoint F1 Desktop Class 1 TB Hard... Manual de usuario
Samsung
Samsung Enterprise Capacity 3.5 HDD/Constellation ES Manual de usuario
Samsung
Samsung MZ-7PC064D Manual de usuario
Samsung
Samsung SPUBS-70R Manual de usuario
Samsung
Samsung HN-M101MBB Manual de usuario
Samsung
Samsung 840 EVO Guía de referencia rápida
Samsung
Samsung MU-PA250B Manual de usuario
Samsung
Samsung G3 Station HX-DU015EC Manual de usuario
Samsung
Samsung HD080HJ - 80 GB Hard Drive Manual de usuario
Samsung
Samsung Series Manual de usuario
Samsung
Samsung Spinpoint M9TU Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario