Samsung SRP-350 Bixolon Manual de usuario

Samsung SRP-350 Thermal Receipt Printer

Integrator’s Manual

Contents

Driver Installation Information 2

Overview .............................................................................................................................2

Windows 98 SRP-350 Driver Installation.............................................................................3

Windows 98 Generic / Text Driver Settings .........................................................................4

Windows 2000 Generic / Text Driver Settings......................................................................5

Windows XP Generic / Text Driver Settings ........................................................................6

Logo Setup 7

Design & Save Bitmap in Microsoft Paint............................................................................7

Download Bitmap to SRP-350 from a PC............................................................................. 8

Upgrade Instructions 10

Downloading Procedure for SRP-350 Printer Software....................................................... 10

Hexadecimal Dumping 11

Overview ........................................................................................................................... 11

Hexadecimal Dump Sample Printout.................................................................................. 12

Troubleshooting................................................................................................................. 13

Cash Drawer 14

Generate Pulse Command.................................................................................................. 14

Connection Information..................................................................................................... 15

Wall Mount Option 16

Downloading Procedure for SRP-350 Wall Mount Printer Software ................................... 16

Special Application Firmware 16

Overview ........................................................................................................................... 17

CRS, Inc.

2909 Anthony Lane

Minneapolis, MN 55418

(612) 781-3474

All specifications are subject to change without notice 2002, Cash Register Sales, Inc.

2•Driver Installation Information Samsung SRP-350 Setup & Service Information

Driver Installation Information

Overview

If your POS software requires a generic printer driver, you must make the appropriate driver

settings for auto cut and cash drawer opening.

If you are using one of the SRP-350 drivers the generic driver settings shown here do not

apply. The appropriate SRP-350 drivers operate the cutter and cash drawer automatically.

Samsung SRP-350 Setup & Service Information Driver Installation Information •3

Windows 98 SRP-350 Driver Installation

You can download the compressed SRP-350 driver, 350_130_2K.zip, from the dealer area of

the CRS site, www.crs-usa.com. Unzip (extract) the file SRP350.drv.

1. Select Start, then Settings, and then Printers.

2. From the printers dialog, right click the Add Printer icon.

3. From the Add Printer wizard window, click Next.

4. Choose Local Printer, click Next.

5. Click the Have Disk command button. From the Install From Disk dialog box, click

the Browse button to locate the driver file SRP350.drv. Click OK. The wizard

displays the list of available drivers for the SRP-350.

6. Select a driver from the table that follows and click Next.

Driver Description

SRP350 No cut Use with SRP350 –no paper cut

STP130 No cut Do not use

OM8324 No cut Do not use

SRP350 Partial cut Use with SRP350 –partial paper cut

STP130 Partial cut Do not use

OM8324 Partial cut Do not use

SRP350 No cut & Bel Use with SRP350 –no paper cut and sounds auto

paper beep when data is sent to printer –requires

version 1.19B EPROM installed in SRP350.

SRP350 Partial cut & Bel Use with SRP350 –partial paper cut and sounds

auto paper beep when data is sent to printer –

requires version 1.19B EPROM installed in

SRP350.

7. Select the port to which the printer will be connected and click Next.

8. Enter a printer name and select whether you want your windows based program to use

this printer as the default printer. Click Next.

9. Select whether you wish to print a test page and click Finish. The printer driver

installation is complete.

4•Driver Installation Information Samsung SRP-350 Setup & Service Information

Windows 98 Generic / Text Driver Settings

1. Select Start, then Settings, and then Printers.

2. From the printers dialog, right click the Generic / Text Only driver and choose

Properties.

3. From the Generic / Text Only dialog box, click the Device Options tab:

4. For the cash drawer command, in the Begin Print Job field:

Type: ESC (<ESC> will display)

Type: p (lower case)

Type: 0 (drawer 1) or 1 (drawer 2)

Type: 25 (on time)

Type: 125 (off time)

5. For the auto cut command, in the End print Job field:

Press ALT and type: 0010 (line feed) :

Press ALT and type: 0010 (line feed)

Press ALT and type: 0029 (GS) :

Press ALT and type: 0086 (V) :

Press ALT and type: 0001 (ASCII 01)

6. Click OK to save the new settings.

Cash Drawer

Command

Auto Cut

Command

NOTE:

To enter these

commands, it may

be necessary to

activate the Num

Lock and use the

10-key pad on your

keyboard.

Samsung SRP-350 Setup & Service Information Driver Installation Information •5

Windows 2000 Generic / Text Driver Settings

1. Click the Start button, and then choose Settings, and then choose Printers.

2. From the printers dialog, right click the Generic / Text Only driver and choose

Properties.

3. From the Generic / Text Only dialog box, click the Printer Commands tab:

4. For the cash drawer command, in the Begin Print Job field:

Type: “<1B>p<00>”

5. For the auto cut command, in the End print Job field:

Type: “<1B>m”

6. Click OK to save the new settings.

Cash Drawer

Command

Auto Cut

Command

NOTE:

To enter these

commands, it may

be necessary to

activate the Num

Lock and use the

10-key pad on your

keyboard.

6•Driver Installation Information Samsung SRP-350 Setup & Service Information

Windows XP Generic / Text Driver Settings

1. Click the Start button, and then choose Printers and Faxes.

2. From the printers dialog, right click the Generic / Text Only driver and choose

Properties.

3. From the Generic / Text Only dialog box, click the Printer Commands tab:

4. For the cash drawer command, in the Begin Print Job field:

Type: “<1B>p<00>”

5. For the auto cut command, in the End print Job field:

Type: “<1B>m”

6. Click OK to save the new settings.

Cash Drawer

Command

Auto Cut

Command

NOTE:

To enter these

commands, it may

be necessary to

activate the Num

Lock and use the

10-key pad on your

keyboard.

Samsung SRP-350 Setup & Service Information Logo Setup •7

Logo Setup

Design & Save Bitmap in Microsoft Paint

Maximum horizontal pixels = 512.

1. Set Bit Map size:

•Select IMAGE

•Select ATTRIBUTES

•Set Units = PELS

•Set Colors = Black and White

•Enter the width and height of the bit map. Values must be in multiples of 8 (per

above Bit Map file specifications).

2. Design the Bit Map Image.

3. Prior to saving the Bit Map Image:

•Select IMAGE

•Select INVERT COLORS

Then:

•Select IMAGE

•Select FLIP/ROTATE

•Select ROTATE BY ANGLE

•Select 90 DEGREES repeat two more times to obtain a rotation of 270 degrees in

total.

4. Save the Bit Map Image.

Example: Image To Print (Created In Paint Brush)

Image As Saved

8•Logo Setup Samsung SRP-350 Setup & Service Information

Download Bitmap to SRP-350 from a PC

The Windows application program BmpLogo.exe is used to send a bitmap to the flash ROM of

the SRP-350 POS printer.

The application is available from the dealer area of the CRS web site, www.crs-usa.com.

This program will work with Windows 95\98, and Windows 2000 (only with file system

FAT32). In Parallel mode, the program will only work in bi-directional\EPP mode. The

program will not work in ECP mode. This mode can be changed in CMOS.

1. Start the BmpLogo application. (Click Start, and then Run. Type the path and program

name into the Open field; click OK. Alternatively you can launch the application by

double-clicking on the file in Windows Explorer.) The application displays with the

Setup tab in the forefront.

2. Select the port to which the SRP350 is connected, and then fill the remaining fields to

match the settings on the SRP350. Use the table below as a guide:

Option BmpLogoProgram Setting SRP350 Dip Switch

Setting

Baud rate 9600 SW1 #7=ON; #8=OFF

Bit length 8SW1 #4=OFF

Parity NONE SW1 #5=OFF

Stop Bit 1SW1 #6=OFF

Handshake DTR/DSR SW1 #3=OFF

Samsung SRP-350 Setup & Service Information Logo Setup •9

3. Click the Bitmap Selection tab.

4. Click the Open File command button. Select the path and document name of the bitmap

file you wish to upload to the SRP350 printer.

5. Click the Logo Upload tab.

6. Select the bitmap file you wish to upload and click the Upload command button.

7. Click Close to exit the program.

10 •Upgrade Instructions Samsung SRP-350 Setup & Service Information

Upgrade Instructions

Downloading Procedure for SRP-350 Printer Software

1. Turn off the printer.

2. Set the SW2 DIP switch 2-3 to ON position.

3. Connect the printer to PC with a standard Parallel cable. If using a serial connection, use

the cable described below.

4. Open the printer cover.

5. Press the paper feed key and turn on the printer while holding down the feed key.

6. Execute the 350loade.exe. You must input the number for type of interface, 3for parallel

(lpt1) downloading.

7. Enter the binary file name you want to download. Example: 350v120.bin.

8. You should see download status scroll on your PC screen.

9. Download complete.

10. Turn off printer and set SW2 DIP switch 2-3 to OFF position.

11. Turn on printer and check version and operation.

DB-9F Printer

DB-25M Serial Printer Cable

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS

VCC

TXD

RXD

RTS

CTS

DSR

GND

DTR

CRS Part No. 250030

Otros manuales para SRP-350 Bixolon

Tabla de contenidos

Otros manuales de Impresora de Samsung

Samsung

Samsung ML-2010 Series Manual de usuario

Samsung

Samsung SRP-250 Series Manual de usuario

Samsung

Samsung CLP-775ND Manual de usuario

Samsung

Samsung ML-4550 Series Manual de usuario

Samsung

Samsung ML-6050 Manual de usuario

Samsung

Samsung ProXpress M456x Series Manual de usuario

Samsung

Samsung 1120L Manual de usuario

Samsung

Samsung ML-2955DW/XAA Manual de usuario

Samsung

Samsung CLP 610ND - Color Laser Printer Guía del usuario

Samsung

Samsung SF4500 Manual de usuario

Samsung

Samsung ML-1865W Guía del usuario

Samsung

Samsung Multifunction MultiXpress X322 Series Manual de usuario

Samsung

Samsung CLP-300 Manual de usuario

Samsung

Samsung ML-2250 Series Manual del propietario

Samsung

Samsung SPP 2020 - Photo Printer - 20 Sheets Manual de usuario

Samsung

Samsung ML-7000P Manual de usuario

Samsung

Samsung ML 4050N - B/W Laser Printer Guía del usuario

Samsung

Samsung ML-2525W series Manual de usuario

Samsung

Samsung ML-4050N Manual de usuario

Samsung

Samsung ML-3471ND/XAX Manual de usuario

Samsung

Samsung ML-2550 Manual de usuario

Samsung

Samsung ProXpress M4530NX Manual de usuario

Samsung

Samsung 2 COLOR THERMAL PRINTER SRP-275 Manual de usuario

Samsung

Samsung CLP-300 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

IRA3D

IRA3D POETRY4 Manual de usuario