Samsung wep150 Manual de usuario
Corona III – Samsung to provide Commercial product name
Bluetooth Headset
User Manual
The Multi function button on the headset is in this draft manual presented by the
symbol . The final symbol is to be determined by Samsung.
English
Thank you
1. Check phone compatibility
2. Charge Corona III
3. Read the glossary
4. “Pair” to your Bluetooth® phone
5. Turning headset on/off
6. Choosing wearing preference
7. Making a call
8. Ending a call
9. Answering a call
10. Call-waiting
11. Enhanced features (for Bluetooth phones with hands-free profiles)
12. Frequently asked questions
13. Need more help?
14. Storage of headset
15. Certification and safety approvals
16. Warranty and parts replacement
17. Glossary
Customer service contact details
Thank you
Thank you for purchasing the Corona III Bluetooth® Headset, we hope you will
be delighted with its operation.
Please read the instruction manual to get started and to make best use of the
headset’s many features.
! Drive safely
Using a mobile phone while driving creates a distraction to the driver which may
increase the likelihood of an accident.
When using the phone while driving, keep conversations short and do not make
notes or read documents. Before answering calls consider your circumstances.
Pull off the road and park before making or answering calls when driving
conditions require (e.g. bad weather, high traffic density, presence of children in
the car, difficult junctions or manoeuvres.)
Remember, driving comes first, not the call!
Abide by local laws.
Corona III Overview
1 Blue Indicator Light
2 Multi-Function Button
3 Volume Control Button
4 Charging socket
Fig 1.
STOP: BEFORE USING YOUR HEADSET
1 Check phone compatibility
The Corona III is compatible with most Bluetooth1(see Glossary)phones that
are compliant with Bluetooth version 1.1 or higher specification and support the
headset and/or hands-free profile(s)2. Ensure that your phone has Bluetooth
capability by either visiting your phone manufacturer’s web site or Samsung web
site at www.samsung.com
2 Charge Corona III
Corona III uses a rechargeable battery that must be charged fully before you use
the headset for the first time.
1. Plug the Corona III AC charging adaptor into the headset’s charging
socket.
2. Plug the AC adaptor into the electrical outlet.
3. Charge your headset until the red light turns to green light on Corona III .
The unit will be fully charged in approximately 2 hours.
5. Remove the headset from the AC charging adaptor . You are now ready to
“pair” Corona III to your mobile phone. If the headset has already been
paired to your phone, then you can begin using it.
Fig. 2
! WARNING: Do not attempt to charge Corona III with anything other than the
AC adaptor provided. Using another AC adaptor may damage or destroy the
headset.
! IMPORTANT: The red indicator light will be on while charging and will turn
green when charging is complete. Removing the headset from the charging
cradle while it’s charging will put the headset into standby mode and stop the
charging sequence.
! IMPORTANT: Corona III cannot be used while charging.
3 Read the glossary
Read the glossary at the end of this document to familiarize yourself with
important terms used in this User Manual.
Once Corona III is fully charged, continue with these instructions.
4 “Pair” to your Bluetooth phone
Pairing3will create a unique and encrypted wireless link between two Bluetooth
enabled devices such as your Bluetooth phone and Corona III.
1. Ensure the headset is off (see Turning headset on/off section).
2. Press and hold until you see a solid blue light (approximately 8
seconds), then release* (see Fig. 3).
3. Set your Bluetooth phone to “discover” the headset by following your
phone’s instruction guide. Typically, the steps involve going to a “setup”,
“connect”, or “Bluetooth” menu on your phone and then selecting the
option to “discover” a Bluetooth device.
4. Your phone will find the “Corona III” headset and ask if you want to pair
with it. Confirm this by pressing “yes” or “ok”.
5. Enter passkey or PIN4= 0000 (4 zeros), then press “yes” or “ok”.
Fig. 3
Fig. 4
! IMPORTANT: If pairing was successful, the blue indicator light will flash 10
times rapidly before going back to flashing every 3 seconds. If unsuccessful, the
light remains solid, and you’ll need to reattempt pairing (see steps 3–5 above).
* If you have a Bluetooth phone that supports the hands-free Bluetooth
profile, see Enhanced features section for alternative pairing instructions.
Phone-specific pairing instructions can be found online at www.samsung.com
BASIC OPERATIONS
5 Turning headset on/off
What you do What you hear What you see
Turning headset
on Press and hold
for 3 to 5
seconds until you
see a burst of 4
flashes on the
blue indicator
light, then release
No audio
indication The blue indicator
light will flash
while the power is
on (see Status
indicators table
below)
Turning headset
off Press and hold
for 3 to 5
seconds until you
see a burst of 2
flashes on the
blue indicator
light, then release
No audio
indication The blue indicator
light will stop
flashing
Status indicators
What you see What you hear Status
Flashes every 8 second Quick series of 4tones –
(when active mode
starts)
Active Mode5
• Call in progress
• Up to 8 hours of
talk-time*
Flashes every
3 seconds Quick series of 4tones –
(when standby mode
starts)
Standby Mode6
• Waiting for call
• Up to 240 hours of
standby time*
Red flash instead of Blue 5 tones every 20 seconds Low Battery
• 3 – 5 minutes of
talk time left
* Depending on phone type and usage.
! IMPORTANT: Do not hold the button down for more than 3 to 5
seconds when turning the headset on or else it may go into pairing mode, and
the blue indicator light will turn solid. If that happens, turn off the headset, wait 3
to 5 seconds, and repeat process for turning the headset on.
6 Choosing wearing preference
Corona III is ready to wear on the right ear. If you prefer the left, gently rotate the
ear hook.
For optimal performance, wear Corona III and your Bluetooth phone on the same
side of your body. In general, you will get better performance when there are no
obstructions (including parts of your body) between the headset and the phone.
Fig. 5
7 Making a call
If Corona III is off, turn it on now (see Turning headset on/off section).
Using phone’s keypad
1. Dial number on keypad.
2. Press phone’s “send” key.
Using voice-activated dialing (after you’ve set up voice tags on your phone)
1. Long Press and release once.
2. You’ll then hear the voice-activation tone; say the name of the person you
wish to call.
! NOTE: Record voice tag from headset for better reception.
8 Ending a call
• Press and release once
OR
• End call from phone’s keypad
9 Answering a call
•After you hear the ring tone, press and release once
OR
•Answer the call with your phone’s keypad. You may then need to transfer the
call to the headset by pressing and releasing once (depending on
your phone)
10 Call-waiting*
• (Recommended) Use standard method from your phone’s keypad which
typically involves pressing the “send” button
OR
• Long Press and release once to answer the incoming call and
toggle between calls (some phones do not support this headset feature)
! IMPORTANT: Do not hold the button down too long when making,
ending, or answering a call. This should only be a quick tap, so you don’t put the
headset into pairing mode by accident.
* See Enhanced features section for alternative call-waiting instructions for
phones that support the hands-free profile.
Otros manuales para wep150
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Auriculares de Samsung
Samsung
Samsung BHM3500 Manual de usuario
Samsung
Samsung WEP470 Manual de usuario
Samsung
Samsung B1914B1914 Manual de usuario
Samsung
Samsung WEP 210 Manual de usuario
Samsung
Samsung 90308 Manual de usuario
Samsung
Samsung HM7000 Manual de usuario
Samsung
Samsung HM1500 Manual de usuario
Samsung
Samsung HM-3300 Manual de usuario
Samsung
Samsung HM1000 Manual de usuario
Samsung
Samsung HM7000 Manual de usuario
Samsung
Samsung WEP 300 Manual de usuario
Samsung
Samsung HM-1900 Guía
Samsung
Samsung HM5000 Manual de usuario
Samsung
Samsung EO-BG930 Manual de usuario
Samsung
Samsung WEP250 - WEP 250 Bluetooth Headset Manual de usuario
Samsung
Samsung HM-1300 Manual de usuario
Samsung
Samsung WEP450 - Headset - Over-the-ear Manual de usuario
Samsung
Samsung HM-1900 Manual de usuario
Samsung
Samsung GH68-34355F Manual de usuario
Samsung
Samsung HM5000 Manual de usuario
