Samsung PN58A550S1F Manual de usuario
1
Samsung TV
F/W Upgrade Guide
Samsung Electronics
PN50A550S1FXZA, PN58A550S1FXZAP550
Model CodeSeries (P5)
2
Notice: Please read completely prior to upgrade
¾There are two separate firmware packages required to
complete the upgrading process of the P550 series:
Version 1005.2 or higher for the main processor
P550 firmware 1005.2.exe
Version 1005.3 for the sub processor
P550 firmware 1005.3.exe
¾First determine what the current firmware version is for the
main processor (see below). If the version is 1005.2 or higher
proceed to Step 2 and upgrade the sub processor with 1005.3.
¾How to check the firmware version
User Menu -> Setup -> SW Upgrade
When highlighted the “SW Upgrade”, press the “Info” button on Remote
TV F/W Version : XXXX
3
Step1. Upgrade the firmware version 1005.2
2. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.
3. Go to the USB Memory Drive and then double click the file
P550 firmware 1005.2.exe.
1. Save the firmware file onto your computer.
File : P550 firmware 1005.2.exe
4. Press “Unzip” button. 5. Unzipping is in progress.
6. After completing, press
“OK” and “Close” button.
7. The USB driver should contain one folder
named T-SPNAUS
8. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
4
9. Turn your TV on, and then insert
the USB Memory Drive containing
the firmware upgrade into the
WISELINK port at Side-AV Panel.
NOTE: If you get the “WiseLink” on-
screen selection menu, select “NO”
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
10. Press the Menu button on your
Remote Control.
11. Go to Setup.
On the Setup Menu,
select SW Upgrade, and then
press Enter or the arrow button
(▶) on your remote.
12. The TV will scan the USB Memory
Drive.
5
13. When the software upgrade is
complete; the TV will turn off and
then back on by itself.
Proceed with the ‘Plug & Play’
setup.
14. Once ‘Plug & Play’ is complete;
“Enjoy your watching.” is displayed.
Press the ‘Enter’ key and you are
done.
You can find more information in
User Manual.
※Do not pull the USB drive out and
unplug the power cable until
complete
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
6
Step2. Upgrade the firmware version 1005.3
3. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.
4. Go to the USB Memory Drive and then double click the file
P550 firmware 1005.3.exe.
2. Save the firmware file onto your computer.
File : P550 firmware 1005.3.exe
5. Press “Unzip” button. 6. Unzipping is in progress.
7. After completing, press
“OK” and “Close” button.
8. The USB driver should contain one folder
named ‘T-SPNAUS’
9. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
1. If you completed Step 1 from above, remove the File and Folder (listed
below) on your USB drive.
File : P550 firmware 1005.2.exe
Folder : T- SPNAUS
7
10. Turn your TV on and insert
the USB Memory Drive containing
the firmware upgrade into the
WISELINK port at the Side-AV panel.
NOTE: If you get the “WiseLink” on-
screen selection menu, select “NO”
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
11. Press the Menu button on your
Remote Control.
12. Go to Setup.
On the Setup Menu,
select SW Upgrade, and then
press Enter or the arrow button
(▶) on your remote.
13. The TV will scan the USB Memory
Drive.
8
14. When the software upgrade is
complete the TV will turn off and
then back on by itself.
Proceed with the ‘Plug & Play’
setup
15. Once ‘Plug & Play’ is complete;
“Enjoy your watching.” is
displayed. Press the ‘Enter’ key
and you are done.
You can find more information in
User Manual.
※Do not pull the USB drive out and
unplug the power cable until
complete
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Televisor de pantalla plana de Samsung
Samsung
Samsung LN32C530F1F Manual de usuario
Samsung
Samsung UN55F7050AF Manual de usuario
Samsung
Samsung LT-P 1545 Manual de usuario
Samsung
Samsung LNS2352WX Manual de usuario
Samsung
Samsung UN55F7050AF Manual de usuario
Samsung
Samsung UN60FH6003 Manual de usuario
Samsung
Samsung HG40NA590 Manual de usuario
Samsung
Samsung LN40C650L1F Manual de usuario
Samsung
Samsung UN55D6003SF Instrucciones de montaje
Samsung
Samsung PN50B540S3F Manual de usuario
Samsung
Samsung 5070 Series Manual de usuario
Samsung
Samsung LN40B530P7FXZA Manual de usuario
Samsung
Samsung LN46B750U1FXZA Manual de usuario
Samsung
Samsung PN42C430 Manual de usuario
Samsung
Samsung UN60EH6002F Manual de usuario
Samsung
Samsung UN60C6300SF Manual de usuario
Samsung
Samsung LN-T4669FX - 46" LCD TV Manual de usuario
Samsung
Samsung LNR1550X Manual de usuario
Samsung
Samsung LN22A650AD Manual de usuario
Samsung
Samsung CT-21K40ML Manual de usuario
