Samsung MIM-H14UN Guía
Airconditioner
User&installationmanual
Wi-Fi Kit Single MIM-H14UN
• Thank you forpurchasing this Samsung Product.
• Before operating this unit, please read this manual carefullyand retain it forfuture reference.
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGGX YWYXTW`TW_GGG㝘䟸GXaZ]aY\
2English
Safetyprecautions 3
Safetyprecautions 3
ChecksbeforeInstallation 5
Checks before Installation 5
Accessories • External Dimensions 5
Installing theWi-FiKitSingle 6
Installing the Wi-Fi Kit Single 6
4WayCassette (PC4NUFMUN) 6
Mini 4WayCassette (PC4SUFMUN) 8
1WayCassette (PC1NWFMUN/PC1BWFMUN) 10
360 Cassette (PC4NUNMUN/PC4NBNMUN/PC4NUDMUN/PC4NBDMUN) 12
SmartThingsapp 15
SmartThings app 15
Checking the powerconnections • 15
Setting up and connecting to aWi-Fi access point usingyoursmartphone •
Downloadingthe SmartThings app and registeringyourSamsung account
Connecting the SmartThings app toyourproduct 16
Startingthesystemairconditionerapp 17
Starting the system airconditionerapp 17
Controlling the air conditioner 17
Appendix 18
Troubleshooting 18
Specifications 19
Open Source Announcement 20
Reference 21
Contents
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGGY YWYXTW`TW_GGG㝘䟸GXaZ]aY\
3
English
Safetyprecautions
California Proposition 65Warning (US)
WARNING:
Cancerand Reproductive Harm -www.P65Warnings.ca.gov.
This installation manual explains howto install a Wi-Fi Kit Single to an indoorunit of Samsung system air
conditioners.
Read the installation manual thoroughlybefore installing theWi-Fi Kit Single.
(Referto the appropriate manual forinstalling product orotheroptional parts.)
WARNING
Hazards orunsafe practicesthat mayresult in severe personal injuryordeath.
CAUTION
Hazards orunsafe practicesthat mayresult in minorpersonal injury orpropertydamage.
WARNING
Contactservicecenterforinstallation.
• There is a risk of product malfunction, waterleakage, electric shock orfire.
Installthe productsecurelyin aplacethat canwithstandtheweight oftheproduct.
• If the installation location is not strong enough, product mayfall and be damaged.
Connectthepowerwithratedvoltagewhen installing.
• If not, there is risk offire ordamage tothe product.
Donot attemptto moveorre-installtheproductthat isalreadyinstalled.
• There is risk of electric shock andfire.
Donot attemptto modifyorrepairthe productonyourown.
• There is potential risk of product damage, electric shock orfire.When repairis needed, consult
service center.
Checkif theinstallationwasdone properlyaccordingto theinstallationmanual.
• If the product is installed incorrectly, there is risk of electric shock orfire.
Make sure that allwiring work is done bya qualified person complyingwith regionalstandards and
instructionsin thismanual.
• If the installation is done byunqualified person, there is risk of product malfunction, electric
shock orfire caused byincorrect installation.
Contacttheservice centerifyouneedto disposetheproduct.
Safetyprecautions
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGGZ YWYXTW`TW_GGG㝘䟸GXaZ]aY\
4
Safetyprecautions
English
Safetyprecautions
CAUTION
Do not installthe product in aplacewhere it isormight be exposedto inflammable gas leakage.
• There is risk of fire orexplosion.
Donot installtheproduct ina placewhere itwill beexposedtooil orvaporetc.
• If the product is used in a place where it is exposed to oil, vapor orsulphurdioxide, parts of the
product mayget damaged or product mayfunction abnormally.
Makesurethatwaterdoes notget intothe product.
• There is risk of electric shock andfire.
Makesurethereis notensiontothe cable duringinstallation.
• Cable mayget cut and cause fire.
Install the product in a placewith temperature between 0°C~39 °C (32 °F~102 °F) with nodirect
sunlight.
• If not, there is risk of electric shock orabnormal operation.
Donot installtheproduct ina placewhere specialsprayoracid/alkalisolution isused.
• There is risk of electric shock orabnormal operation.
Donot pressthe buttonswith sharpobjects.
• There is risk of electric shock ordamaging the parts.
Donot connectthepowercabletothe communication cableterminal.
• There is risk of fire.
When installing the product in hospitals orotherplaces, make surethat the productdoes not
interruptwith otherproducts.
• Abnormal operation mayoccur.
Thiswirelessdevicehas apossibilityof radiowaveinterference duringoperation.
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGG[ YWYXTW`TW_GGG㝘䟸GXaZ]aY\
5
English
ChecksbeforeInstallation
Accessories
Wi-Fi Kit Single -with WIRE UserManual / Installation Manual
CAUTION
• TheWi-Fi Kit Single must be installed bya certified technician.
• Before installation, be sure to cut off power.
• Install the cables ofthe Wi-Fi Kit Single insidethe product to prevent useraccess, in accordancewith the
relevant electricalwiring regulations.
ExternalDimensions
[Unit : mm (inch)]
66 (2.59) 14 (0.55)
50 (1.96)
Checksbefore Installation
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGG\ YWYXTW`TW_GGG㝘䟸GXaZ]aY\
6
InstallingtheWi-FiKitSingle
English
Installing theWi-Fi KitSingle
4WayCassette(PC4NUFMUN)
Wheretoinstall
Wi-Fi Kit Single Wi-Fi Kit SingleMotion sensor Motion sensor
Refrigerant
piping
Drain hose is
connected here
Remote control receiver/indicator
<When viewed from the front (outside)> <Wires installed onthe wall>
Remote control receiver/indicatorAirquality sensorAirquality sensor
MAIN PBA MAIN PBA
CAUTION
• If it is not installed at the specified position, communication interference orfailure may occur. Make sure
to install it at the specified position.
• If the panel is alreadyinstalled on the indoorunit, first remove the panel from the indoorunit before
installing the Wi-Fi Kit Single.
Fordetails on howto removethe panel, referto the panel installation manual.
AttachingtheWi-FiKit Single
InstallingtheWi-FiKitSingle
1 Afterseparating the cornerpanel, use the
double-sided tape attached to the inside of the
Wi-Fi Kit Single and fix it to the cornerpanel
indentation.
• Arrange thewire in the direction of the arrow
of the indentation.
Wi-Fi Kit Single
Corner panel
2 Arrange thewiring as follows.
a Unfastenthe single screw(幩) on the back
cover.
b Lift up the back cover inthe arrowdirection
(幪), as shown in the figure.
ߤ
ߣ
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGG] YWYXTW`TW_GGG㝘䟸GXaZ]aY]
7
English
Installing theWi-Fi KitSingle
c Arrangethe wiring so that it is placed under
the back coverwhen the cover is in place.
d Tidyup the WIRE of theWi-Fi Kit Single along
the inside of the panel.
e Attach the back cover.
Wi-Fi Kit Single
Back cover
Electricalwiring
CAUTION
• TheWIRE may get damaged if it is pinched
between the back coverand the panel main
bodywhen attaching the back cover. Exercise
caution to ensure that theWIRE is not pinched.
• When attaching the back cover, fix the panel
insulation to the original position.
3 Attach the panel to the indoorunit.
(Fordetails on howto attach the panel, referto
the panel installation manual.)
4 Open the electric unit coveron the indoorunit,
and connect theWIRE of theWi-Fi Kit Single to
the ‘WIFI’ connector (yellow, 5-pin) at the top
right.
Connect theWIRE of Wi-Fi Kit Single here
5 Close the electric unit coveron the indoorunit.
6 Attach the SmartThings stickerto the spot
specified in the figure below.
a Remove the back film from the sticker, and
then attach the label at the specified spot.
b Remove the front film while pressing down
on the sticker.
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGG^ YWYXTW`TW_GGG㝘䟸GXaZ]aY]
8
InstallingtheWi-FiKitSingle
English
Installing theWi-Fi KitSingle
Mini4WayCassette(PC4SUFMUN)
Wheretoinstall
Wi-Fi Kit Single Wi-Fi Kit SingleMotion sensor Motion sensor
Refrigerant
piping
Drain hose is
connected here
Remote control receiver/indicator
<When viewed from the front (outside)> <Wires installed onthe wall>
Remote control receiver/indicator
MAIN PBA MAIN PBA
CAUTION
• If it is not installed at the specified position, communication interference orfailure may occur. Make sure
to install it at the specified position.
• If the panel is alreadyinstalled on the indoorunit, first remove the panel from the indoorunit before
installing the Wi-Fi Kit Single.
Fordetails on howto removethe panel, referto the panel installation manual.
AttachingtheWi-FiKit Single
1 Afterseparating the cornerpanel, use the double-
sided tape attached tothe inside of theWi-Fi Kit
Single and fix it to the cornerpanel indentation.
• Arrange thewire in the direction of the arrow
of the indentation.
Wi-Fi Kit Single
Cornerpanel
2 Arrange thewiring as follows.
a Unfastenthe single screw(幩) on the back
cover.
b Lift up the back cover inthe arrowdirection
(幪), as shown in the figure.
Y
X
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGG_ YWYXTW`TW_GGG㝘䟸GXaZ]aY_
9
English
Installing theWi-Fi KitSingle
c Arrangethe wiring so that it is placed under
the back coverwhen the cover is in place.
d Tidyup the WIRE of theWi-Fi Kit Single along
the inside of the panel.
e Attach the back cover.
Wi-Fi Kit Single
Back cover
Electricalwiring
CAUTION
• TheWIRE may get damaged if it is pinched
between the back coverand the panel main
bodywhen attaching the back cover. Exercise
caution to ensure that theWIRE is not pinched.
• When attaching the back cover, fix the panel
insulation to the original position.
3 Attach the panel to the indoorunit.
(Fordetails on howto attach the panel, referto
the panel installation manual.)
4 Open the electric unit coveron the indoorunit,
and connect theWIRE of theWi-Fi Kit Single to
the ‘WIFI’ connector (yellow, 5-pin) at the top
right.
Connect theWIRE of Wi-Fi Kit Single here
5 Close the electric unit coveron the indoorunit.
6 Attach the SmartThings stickerto the spot
specified in the figure below.
a Remove the back film from the sticker, and
then attach the label at the specified spot.
b Remove the front film while pressing down
on the sticker.
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGG` YWYXTW`TW_GGG㝘䟸GXaZ]aZW
10
InstallingtheWi-FiKitSingle
English
Installing theWi-Fi KitSingle
1WayCassette (PC1NWFMUN/PC1BWFMUN)
Wheretoinstall
Wi-Fi Kit Single
CAUTION
• If it is not installed at the specified position, communication interference orfailure may occur. Make sure
to install it at the specified position.
• If the panel is alreadyinstalled on the indoorunit, first remove the panel from the indoorunit before
installing the Wi-Fi Kit Single.
Fordetails on howto removethe panel, referto the panel installation manual.
ki]_TXXZW^hTWWpiptzvsG~TmGrp{Gzj}luUGGGXW YWYXTW`TW_GGG㝘䟸GXaZ]aZW
Tabla de contenidos
Otros manuales de Acondicionador de aire de Samsung
Samsung
Samsung DH24BTA Manual de usuario
Samsung
Samsung AQA07C5(6)ME Manual de usuario
Samsung
Samsung AC180JNHPKH/AR Manual de usuario
Samsung
Samsung NS071LDXEA Manual de usuario
Samsung
Samsung AR NXFP Series Manual de usuario
Samsung
Samsung AC BNADCH Series Manual de usuario
Samsung
Samsung AC100RN4PKG Manual de usuario
Samsung
Samsung AC009BNLDCH Manual de usuario
Samsung
Samsung AW05B0LA Manual de usuario
Samsung
Samsung AQV36W Manual de usuario
Samsung
Samsung MH020FPEA Manual de usuario
Samsung
Samsung AVMBH020EA4 Manual de usuario
Samsung
Samsung SH12UA1 Manual de usuario
Samsung
Samsung Max Heat 2.0 Manual de instrucciones
Samsung
Samsung AWT18Q1HDA Manual de usuario
Samsung
Samsung AR12TVEAAWKNAP Manual de usuario
Samsung
Samsung DMS2 Manual de usuario
Samsung
Samsung AC BXAP G Series Manual de usuario
Samsung
Samsung AS12SGGB Guía de configuración
Samsung
Samsung DVMS HP Manual de usuario
