Samson AirLine 88 Series Manual de usuario

OWNER'S MANUAL

This product is covered by the US patent: US9,602,053

Samson Technologies Corp.

278-B Duffy Ave

Hicksville, NY 11801

www.samsontech.com

AirLine 88x Wireless System 3

Important Safety Information

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This lightning ﬂash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of non-insulated “dangerous voltage”

within the product’s enclosure that may be of sufﬁcient magnitude to constitute

a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance instructions in the

literature accompanying the appliance.

ATTENTION

RISQUE D’ÉLECTROCUTION !

NE PAS OUVRIR !

WARNING

TO PREVENT FIRE OR SHOCK HAZARD. DO NOT USE THIS PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED

TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE

BLADE PLUG TO WIDE SLOT AND FULLY INSERT.

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Private household in the 28 member states of the EU, in Switzerland and Norway may

return their used electronic products free of charge to designated collection facilities or to a

retailer (if you purchase a similar new one).

For Countries not mentioned above, please contact your local authorities for a correct method of

disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment,

recovery and recycling and thus prevent potential negative effects on the environment and

human health.

Important Safety Information

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufac-

turer’s instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including ampliﬁers)

that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding type plug. A polar-

ized plug has two blades with one wider

than the other. A grounding type plug has

two blades and a third grounding prong.

The wide blade or the third prong are

provided for your safety. If the provided

plug does not ﬁt into your outlet, consult

an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked

on or pinched particularly at the plugs,

convenience receptacles, and at the point

where they exit from the apparatus.

11. Only use attachments/accessories speci-

ﬁed by the manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table speciﬁed

by the manufacturer, or sold with

the apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid injury

from tip-over.

13. Unplug the apparatus during lightening

storms, or when unused for long periods

of time.

14. Refer all servicing to qualiﬁed personnel.

Service is required when the apparatus

has been damaged in any way, such as

power supply cord or plug is damaged,

liquid has been spilled or objects have

fallen into the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been dropped.

15. This appliance shall not be exposed to

dripping or splashing water and that no

object ﬁlled with liquid such as vases

shall be placed on the apparatus.

16. Caution-to prevent electrical shock,

match wide blade plug wide slot fully

insert.

17. Please keep a good ventilation environ-

ment around the entire unit.

18. The direct plug-in adapter is used as

disconnect device, the disconnect device

shall remain readily operable.

19. Batteries (battery pack or batteries in-

stalled) shall not be exposed to excessive

heat such as sunshine, ﬁre or the like.

AirLine 88x Wireless System 5

Important Safety Information

FCC Rules and Regulations

Samson wireless receivers are certiﬁed under FCC Rules part 15 and transmitters are certiﬁed

under FCC Rules part 74. Licensing of Samson equipment is the user’s responsibility and

licensability depends on the user’s classiﬁcation, application and frequency selected.

This device complies with Part 15 of the FCC rules Class B and RSS-210 of Industry & Science

Canada.

Operation is subject to the following two conditions:

(1) This device must not cause harmful interference, and

(2) This device must accept any interference received including interference that

may cause undesired operation. Suitable for home or ofﬁce use.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced Radio/TV technician for help.

WARNING: Changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This equipment is intended for use in wireless microphone applications.

Equipment is intended for sale in: AT, BE, CH, CY, CZ*, DK, EE, FI*, FR*, DE*, GR*, HU, IE, IS,

IT, LV, LT*, LU, MT*, NL, NO*, PL* PT, RO, SK, SI, ES, SE, UK

*Subject to license. Please contact your national frequency authority for information on

available legal use in your area. Any changes or modiﬁcations not expressly approved by

Samson Technologies Corp. could void your authority to operate the equipment.

Hereby, Samson Technologies Corp., declares that this CR88x, CH88 and CB88 are in

compliance with the essential requirements and other relevant provisions of Directive 2014/53/

EU. The declaration of conformity may be consulted at:

http://www.samsontech.com/site_media/support/manuals/AirLine88x_AG8_DOC.pdf

Congratulations on purchasing the Samson AirLine 88x AG8 Guitar system. The AirLine 88x

offers true wireless freedom without the hassle of a beltpack or cable. Featuring a plug-in

transmitter with a dual-position connector that is designed to ﬁt a variety of guitar jacks, the

system provides professional sound, premium reliability and a 300’ operating range, freeing you

to roam the stage. Offering frequency-agile UHF operation, the CR88x receiver provides 100

available channels to secure reliable wireless performance. The receiver provides easy setup

with 1-touch scan that analyzes and selects the clearest operating channel and infrared set to

pair the transmitter with the receiver.

The AirLine 88 AG8 system continues Samson’s longstanding commitment to wireless

innovation. Designed to be an extension of your instrument rather than a separate component,

the AG8 Guitar Transmitter lets you rule the stage with conﬁdence. The AirLine 88x system

ensures clear, interruption-free performance by combining tone-key with auto-mute. This

conﬁguration allows only the transmitter’s audio to pass through the receiver, and mutes the

output if there is any interference. For travel or permanent installation, the AirLine 88x includes

a standard 19" rackmount kit.

In these pages, you’ll ﬁnd a detailed description of the features of the AirLine 88x wireless

system, as well as a guided tour through its control panel, step-by-step instructions for its setup

and use, and full speciﬁcations. If your wireless system was purchased in the United States,

you’ll also ﬁnd a warranty card enclosed—don’t forget to ﬁll it out and mail it in so that you

can receive online technical support and so that we can send you updated information about

this and other Samson products in the future. Also, be sure to check out our website (www.

samsontech.com) for complete information about our full product line.

We recommend you keep the following records for reference, as well as a copy of your sales

receipt.

Receiver Serial number: _________________________________________

Transmitter Serial number: ______________________________________

Date of purchase: ______________________________________________

Dealer name: __________________________________________________

If you have any questions or comments regarding the AirLine 88x AG8 Guitar system or any

other products from Samson, do no hesitate to contact us at support@samsontech.com.

With proper care and maintenance, your AirLine 88x System will operate trouble-free for many

years. Should your AirLine 88x System ever require servicing, a Return Authorization (RA)

number must be obtained before shipping your unit to Samson. Without this number, the unit

will not be accepted. Please visit www.samsontech.com/ra for an RA number prior to shipping

your unit. Please retain the original packing materials and, if possible, return the unit in its

original carton. If your AirLine 88x System was purchased outside of the United States, contact

your local distributor for warranty details and service information.

Introduction

AirLine 88x Wireless System 7

In order for your wireless system to work correctly, both the receiver and transmitter must be set to the

same channel.

Follow this basic procedure for setting up and using your AirLine 88x Guitar wireless system:

Physically place the CR88x receiver where it will be used, and extend the antennas vertically.

The general rule of thumb is to maintain “line of sight” between the receiver and transmitter so

that the person using the transmitter can see the receiver.

With the CR88x receiver powered off, connect the included power adapter. Turn the CR88x

on momentarily to confirm that the unit is receiving power. You’ll see the LED display light up.

Then turn the CR88x power off.

With your amplifier or mixer off and volume control all the way down, connect the CR88x

receiver to the input of an amplifier or the mic or line level input of a mixer using the balanced

XLR output or unbalanced 1/4”output. Turn the Level knob on the CR88x completely

counterclockwise, then turn its power on.

Quick Start

With the AG8 powered off, install a

fresh AA battery. Be sure to observe the

plus and minus polarity markings.

Turn on the power to the

transmitter by sliding the

Power switch to the left.

Quick Start

Note: The AG8 will only accept infrared transmission from the receiver for the ﬁrst 10

seconds after the AG8 is powered on. If you need to change the operating channel,

the AG8 must be ﬁrst powered off, then powered on again to receive the new channel.

Press the SCAN button for more than 2

seconds (the display will start to ﬂash quickly)

on the front of the CR88x receiver to scan

for an available channel. Once the optimal

channel is selected the receiver will enter IR

Set mode. The display will ﬂash slowly in IR

Set mode.

If you want to set a transmitter to the

receiver’s currently selected channel, press

and hold the SCAN button for more than 10

seconds (until the display ﬂashes slowly) to

enter IR Set mode directly.

3. Plug in receiver 4. Turn on receiver 5. Plug receiver into audio system 6. Press Select button to change channel 9. Press and hold SELECT button to IR set 10. Adjust Volume control7. Install batteries 8. Press button on transmitter to turn on

9. Press and hold Select button to IR set7. Install batteries 8. Turn on belt pack transmitter

Position the AG8 transmitter about 3–12” (8–30 cm) from the front of the CR88x with the

transmitter’s IR window facing the IR transmitter on the front panel of the CR88x receiver.

When the transmission is complete, the CR88x

will receive RF signal and the tone key from the

transmitter. The READY indicator will light on the

front panel of the CR88x receiver.

This device complies withPart 15of the

FCC Rules.Operation issubject to the

followingtwo conditions:

(1)This device may not cause harmful

interference,and

(2)this device must accept any

interferencereceived, including

interferencethat may cause

undesiredoperation.

FREQ:

542-566MHz

This device complies withPart 15of the

FCC Rules.Operation issubject to the

followingtwo conditions:

(1)This device may not cause harmful

interference,and

(2)this device must accept any

interferencereceived, including

interferencethat may cause

undesiredoperation.

FREQ:

542-566MHz

9. Press and hold Select button to IR set7. Install batteries 8. Turn on belt pack transmitter

AirLine 88x Wireless System 9

Quick Start - Single System Setup

When the transmission is complete, the CR88x will

receive RF signal and the tone key from the trans-

mitter. The READY indicator will light on the front

panel of the CR88x receiver.

Turn on your connected amplifier or mixer, but keep

the volume all the way down. Set the Volume knob

on the CR88x fully clockwise (to its “10” setting).

This is unity gain.

Play your instrument at normal performance level.

Slowly raise the volume of your amplifier or mixer until the desired level is reached.

If you find the system has noticeable dropouts, reduced overall working range, or unexpected

noise bursts, change the operating channel of the system using the steps above.

9. Press and hold Select button to IR set7. Install batteries 8. Turn on belt pack transmitter

Multiple System Setup

When using multiple systems, each system must be set to a different operating channel. Transmitter

and receiver pairs must be on the same channel plan in order to work together.

When setting an additional transmitter, make sure to move all other transmitters away from the

CR88x receiver to prevent setting multiple transmitters to the same channel.

Setting the Plug for your Guitar

The AG8 plug can be configured for Fender

Stratocaster™-type (angled) recessed jacks,

and in a second position designed to be

used with all other instruments that have end

mount-jacks.

To configure the AG8 for Fender

Stratocaster™ (angled jack) or flat jack style

guitars, remove the thumbscrew, unscrew the

plug and reinstall the two components while

swapping their positions.

Fender Stratocaster™-type jack End Mount-type jack

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de micrófono de Samson

Samson

Samson EXPEDITION XP40iw Manual de usuario

Samson

Samson Airline 77 Manual de usuario

Samson

Samson XPD2m Manual de usuario

Samson

Samson AIRLINE CR77 Manual de usuario

Samson

Samson VHF Micro VHF Micro TRUE DIVERSITY WIRELESS Manual de usuario

Samson

Samson Concert 288x Manual de usuario

Samson

Samson Stage 266: Dual Handheld Wireless System Manual de usuario

Samson

Samson AirLine 77 AH7 Manual de usuario

Samson

Samson Airline 77 Manual de usuario

Samson

Samson SYNTH32 Manual de usuario

Samson

Samson AirLine Manual de usuario

Samson

Samson UHF Synth 32 Manual de usuario

Samson

Samson Concert 77 Manual de usuario

Samson

Samson AirLine AX1 Manual de usuario

Samson

Samson S-Combine Manual de usuario

Samson

Samson AirLine Manual de usuario

Samson

Samson CONCERT 88X Manual de usuario

Samson

Samson CONCERT 99 Manual de usuario

Samson

Samson Stage XPD1 Manual de usuario

Samson

Samson Concert UHF Manual de usuario

Samson

Samson Concert 88 Manual de usuario

Samson

Samson CONCERT SERIES IV Manual de usuario

Samson

Samson Airline 77 Manual de usuario

Samson

Samson AirLine Manual de usuario

Manuales populares de Sistema de micrófono de otras marcas

Paso

Paso R824 Manual de usuario

Naxa

Naxa NAM-982 Manual de usuario

Motorola

Motorola PMNN4461 Manual de usuario

Xvive

Xvive U3 Manual de usuario

Tekon

Tekon DUOS Manual de usuario

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manual de usuario

Devine

Devine WMD-IE Manual de usuario

LG LF-D7150 Manual de usuario

GE S768DAV Manual de usuario

LD U305 HBH 2 Manual de usuario

Chainway

Chainway URA8 Manual de usuario

ORATOR

ORATOR D860TD Manual de usuario

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manual de usuario

Alpha Technologies

Alpha Technologies RBMS Manual de usuario

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manual de usuario

Shure

Shure UA844 Manual de usuario

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manual de usuario

Pyle

Pyle PDWM5000 Manual de usuario