Safety Vision OBSERVER 4116 Manual de instalación
Observer™ 4116 Nvr
Hardware User GUide
For system configuration, please
refer to the Observer Series
Configuration Guide.
Important Notices
Title: Observer™ 4116 HVR Hardware User Guide
Document Version: 1
Revision: 3
Safety Vision attempts to provide information contained
in this manual based on the latest product information
available at the time of publication. However, because of
Safety Vision’s policy of continual product improvement,
Safety Vision reserves the right to amend the information in
this document at any time without prior notice.
This material is confidential and the property of Safety
Vision. It is shared with your company for the sole purpose
of helping you with the operation of the described
equipment.
Safety Vision makes no warranty of any kind with regard
to this material, including, but not limited to, the implied
warranties of merchantability and fitness for a particular
purpose. Safety Vision shall not be liable for errors
contained herein or for incidental or consequential damages
in connection with the furnishing, performance, or use of
this material.
Safety Vision expressly disclaims all responsibility and
liability for the installation, use, performance, maintenance,
and support of third-party products. Customers are advised
to make their independent evaluation of such products.
No part of this document may be photocopied, reproduced,
or translated to another language without the prior written
consent of Safety Vision.
Safety Vision® is a registered trademark of Safety Vision,
LLC. All other products or name brands mentioned in this
document are trademarks of their respective owners. For
more information about Safety Vision and its products, go to
www.safetyvision.com or call 800-880-8855.
Contents
Main Wiring Diagram 3
Installation
Flat Mount 4
Security Cover 4
Hard Drive Removal 5
SD Card Insertion /Removal 6
Components
Front Panel 7
Rear Panel 8
Appendix A: Specications 9
Appendix B: Dimensions 10
FCC Compliance Statement 11
1observer 4116 Hvr Hardware User GUide
observer 4116 Hvr Hardware User GUide 2
The Observer Series Recorders consists of two (2) separate user guides:
1. Hardware User Guide
2. Configuration User Guide
This document is the Hardware User Guide. It provides wiring, installation, and components
description.
For system configuration, please refer to the Observer Series Configuration Guide.
Main Wiring Diagram
CAN BOX connections
TO COLOR
GND BLACK
485B-1 GREEN
485B-1 WHITE
+5V RED
3observer 4116 Hvr Hardware User GUide
Installation
Flat Mount
Secure the NVR to the surface with self-tapping screws or
rivets.
Ensure that the front panel of the NVR remains accessible
and there is a minimum 2.5 inches of clearance for cables..
Do not install the NVR in an area of the vehicle cabin that
could interfere with the safe operation of the vehicle.
Security Cover
After connecting all needed cables to the rear of the NVR
as shown in the Main Wiring Diagram, secure the Security
Cover with the included Phillips head screws as shown in
the diagram.
observer 4116 Hvr Hardware User GUide 4
Hard Drive Removal
To remove the hard drive from the NVR:
1. Ensure the NVR is powered off.
2. Release the two faceplate security tabs on the side of
the enclosure.
3. Insert the key into the faceplate lock and turn it
clockwise.
4. Open the faceplate.
5. Pull the hard drive firmly and straight out.
5observer 4116 Hvr Hardware User GUide
SD Card Insertion /Removal
Do not force the SD card into the slot upside down or
backwards.
Ensure the SD card’s write protection slider is in the
“unlocked” position.
Do not remove the SD card until the NVR is turned off.
1. Open the faceplate as described in the previous
procedure.
2. Open the SD card slot door from the left edge.
3. Insert an SD card into the SD card slot label-side up,
with the notch to the right, until it clicks in place.
To remove the SD card, press the SD card as far as it
will go in the slot, then allow it to “spring” out.
observer 4116 Hvr Hardware User GUide 6
STATUS LEDS
LAN Indicates network activity
Power NVR is receiving power
REC NVR is recording video
VLoss One or more cameras is detached or malfunctioning
ALM Event/alarm has occured
ERR Storage Error - corrupted driver or unformatted drive
1 - Removable Hard Drive The hard disk drive (HDD)
provides the main storage for recorded data.
2 - USB Port Insert a USB flash drive to download events
quickly without having to remove the SD card or hard
drive, or upload firmware updates. A USB mouse may
also be attached to navigate menus in collaboration with
an external monitor.
3 - eSATA Port Connect optional external equipment.
4 - Status LEDs The Status LEDs illuminate to display the
current status of the NVR. See chart at left.
5 - SD Card Slot Insert an SD card into the slot until it clicks.
To remove the SD card, briefly press it in until it ejects.
6 - SIM Card Slot Insert a SIM card as required by a cellular
network provider.
Components
Front Panel
7observer 4116 Hvr Hardware User GUide
1 - Power Port Connection for the main power harness.
2 - Panel Port Connection for optional CP4-series monitors.
3 - Serial Port Connection for the sensor block wiring
harness.
4 - WAN Port (RJ45) Connection for optional network
accessories.
5 - LAN Port (RJ45) Connection for the POE Smart Switch IP
camera hub. The Smart Switch MUST be connected to
the LAN port.
6 - GPS Antenna Port Connection for the external antenna
for the internal GPS module.
7 - WiFi Antenna Port Connection to an external antenna for
the internal WiFi module.
8 - IPC Ports Connections for up to 16 network IP cameras.
9 - Fan Power Connection for fan power when the NVR is
installed in an optional lockbox equipped with a fan.
10 - USB Port Connection for optional USB accessories.
11 - Debugging Port Connection for debugging and
development (Service Technician use only).
Rear Panel
observer 4116 Hvr Hardware User GUide 8
Otros manuales para OBSERVER 4116
1
Tabla de contenidos
Otros manuales de DVR de Safety Vision
Safety Vision
Safety Vision OBSERVER 4112 HVR Manual de usuario
Safety Vision
Safety Vision OBSERVER 4401-HVR Manual de instalación
Safety Vision
Safety Vision OBSERVER 4816-NVR Manual de instalación
Safety Vision
Safety Vision SV-1600 Manual de usuario
Safety Vision
Safety Vision Observer 4000 Manual de usuario
Safety Vision
Safety Vision SVR-4100 Manual de usuario
Safety Vision
Safety Vision OBSERVER 4120 Manual de instalación
Safety Vision
Safety Vision ROADRECORDER 8000 Instrucciones de funcionamiento originales
Safety Vision
Safety Vision SVR-4401-3C Manual de usuario
Safety Vision
Safety Vision OBSERVER 4100 Manual de usuario
Safety Vision
Safety Vision RoadRecorder 9000 Manual de usuario
Safety Vision
Safety Vision RoadRecorder 7000 Manual de usuario
Safety Vision
Safety Vision SV-1000 Manual de usuario
Safety Vision
Safety Vision ICOP PRO HD HVR Manual de usuario
Safety Vision
Safety Vision OBSERVER 4120 Manual de usuario
Safety Vision
Safety Vision OBSERVER 4100 HVR Manual de usuario
Safety Vision
Safety Vision RouteRecorder 4C SD SS Manual de usuario
