Safety Technology International Exit Stopper STI-6400 Series Instrucciones de uso

Exit Stopper®

Quick Install

STI-6400 Series

SET UP

1. Key in OFF position 3. Remove cover from base,

push on lock to separate

5. Unwrap battery

and connect

6. Terminal block (for remote and

relay options) – refer to full install

online for wiring connections

7. Test – place magnet next to reed, turn on,

separate magnet from reed

8. Apply language label if desired

4. Choose setting – refer

to switch table, default

settings shown side 2

OFF

LED

DO NOT TOUCH

LED -

Do Not Touch

2. Remove security screw

MOUNTING

9. Place reed at desired location

(top, right, bottom or left)

10. Position base. Mark and drill four (4) holes 1”

(25mm) deep. Using plastic anchor, drill 3/16”

(4.5mm). Install into wood or steel: drill 9/64”

(3.5mm). Mount using (4) M4 x 25mm screws.

11. Install reed magnet, mark with pencil,

drill, install using plastic anchor, drill

3/16” (4.5mm). Install into wood or

steel: drill 1/8” (3mm). Mount with (2)

M3.5 x 32mm screws.

12. Test, turn key on, open door

13. Replace cover, snap lid from top,

secure with security screw

6400 QUICK INSTALL

FEB2018

Subject to change

without notice.

2306 Airport Rd • Waterford, MI 48327, USA

Phone: 248-673-9898 • Fax: 248-673-1246

[email protected] • www.sti-usa.com

Taylor House • 34 Sherwood Road • Bromsgrove, Worcestershire • B60 3DR • England

Tel: +44 (0)1527 520 999 • Fax: +44 (0)1527 501 999 • [email protected] • www.sti-emea.com

MOUNTING HOLESMOUNTING HOLES

Mounting holes Mounting holes

SWITCH SETTINGS 1 2 3 4 5 6 7 8

Arming - immediate OFF*

Arming - 15 second delay ON

Trip - immediate OFF*

Trip - 15 second delay ON

Shut-off based on duration

Shut-off approx. 3 sec. after

Duration - 30 second alarm OFF* OFF*

Duration - 180 second alarm OFF ON

Duration - continuous alarm ON OFF

Duration - annunciator mode ON ON

Low battery detection ON OFF*

Low battery detection OFF ON

Volume - high ON*

Volume - low OFF

Relay function OFF OFF*

Relay function ON ON

*default

OFF*

door closes

(switches 4 & 5)

Otros manuales de Sensor de seguridad de Safety Technology International