Safer PR90 Manual de usuario
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
1
of
112
Safer PR90
Passbook Printer
Maintenance Manual
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
2
of
112
GLOBALIS ELECTRONICS INFORMATION CORP.LTD.
1. PRODUCT OVERVIEW
1.1. INTRODUCTION
PR9 is a specialized banking printer. It designed to be the most advanced
solution for banking transaction and financial services. It delivers high
productivity, durability, simplicity and flexibility. It handles documents of
every type, format and thickness: single sheets of paper, vouchers, A4
format, tickets, multi-copy forms, passbooks.
Very versatile, this printer can also be used in Public Administration
front-office environments and in post offices. It can be upgraded with a
horizontal magnetic device for reading/writing horizontal magnetic stripes.
This printer model can also be configured with different interfaces and
emulations. If requires, it can be configured to print on continuo forms with a
rear tractor.
The PR9 maintains complete compatibility to PR2/PR2E.
PR9 carries the following significant differences:
－ Bran-new design.
－ Improved printing speed.
－ Interchangeable communication ports thanks to the possibility of
installing supplementary snap-in interface cards.
－ 200 to 240 VAC + 10% switching power supply unit
－ Dual-interface functionality in all emulations.
1.2. GENERAL MACHINE CHARACTERISTICS
PRINTING MODULE Dot-matrix printhead with 24 needles
made of tungsten carbide and over
temperature protection
printing capability: 1 original + 6 copies
Passbook handling features.
PRINTING SPEED 100cps(10cpi LQ);
150cps(10cpi NLQ);
300cps(10cpi DQ);
360cps(10cpi HSD);
PRINT QUALITY H.S.D;
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
3
of
112
DRAFT;
N.L.Q.;
L.Q.;
RIBBON BOX Black nylon, indelible
PAPER FEED Front feeder with automatic document
alignment.
PANEL Located on the printer cover, it has 5
buttons, 4 LEDs and 1 LCD.
EMULATIONS OLIVETTI (PR40+, PR9)
IBM (PP II, X24)
IBM 9068/4748
LQ1600K, OKI5330SC/5530SC
INTERFACE Standard RS 232C serial with the
possibility of installing the following
interface cards:
- RS 232C serial + USB
- Centronics parallel
- 2
nd
RS232C serial.
DIMENSIONS Width: 398 mm;
Depth: 296 mm;
Height: 215mm;
Weight: 9.1 Kg (basic model)
ENVIRONMENTAL
CONDITION Temperature:
Operation 5°C ~35°C
Storage / Transport -40 °C ~ 50 °C
Relative Humidity:
Operation 15% ~85%;
Storage / Transport ≤93% (40 °C) .
POWER CONSUMPTION Stand-by: < 15 W;
During operation: 170 W max (worst case).
POWER SUPPLY Voltage:: 200 to 240 VAC ± 10%
Frequency: 50HZ ±2%.
The following figure gives an overall view of the printer.
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
4
of
112
Fig. 1-1 PR9 Printer
1.3. DOCUMENTS HANDLED BY THE BASIC MACHINE
1.3.1. PAPER HANDLE INSTITUTION
Advanced capacity of paper handling:
Automatic paper feeding.
Adjust the printing thickness automatically.
Automatic alignment.
Automatic paper edge detection.
1.3.2. CAPACITY OF COPY
Number of copies (carb.)
1 + 6 (original medium weight: 40g/ [mm]~60g/ [mm], carbon paper weight:
20g /[mm]~40g /[mm]), multicopy carbon paper weight: 380g/mm.
1.3.3. DOCUMENT HANDLED
Single forms, fanfold paper, multicopy paper, passbook, voucher etc.
1.3.4. DOCUMNETS SPECIFICATION AND SHEET THICKNESS
DOCUMENTS SPECIFICATION
----Single or multicopy carbon paper
Width 80mm ~ 245mm
Length (OLIVETTI) 70 mm ~ 450mm
Recommended length: 297mm
(IBM, OKI, LQ): more than 70mm
Printing field (10 cpi) 238mm
---- Vertical binding passbook
Open passbook width 90mm~241.3mm
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
5
of
112
Passbook length 85mm~ 220 mm
----horizontal binding passbook
Passbook width 90mm~ 241.3[mm
Open passbook length 85mm~220mm
SHEET THICNESS
----single sheet: 0.06mm~0.28mm (45g/mm~160 g/mm)
Bind the passbook: only using thread but others, especial staples and clips.
Using the passbook: keep the passbook safely and steadily but collapse.
----passbook:
Maximum thickness 2mm
Max. difference in level between pages 1.2mm (between pages)
Cover thickness 0.2mm~0.5mm
1.4. ACCESSORIES
This section describes the accessories available for the PR9 printer.
BLACK NYLON SNUG CART RIBBON CARTRIDGE
Ribbon cartridge specific for the PR9’s printhead, with width of 7mm, length
of 22m and
a life-span of more than 5 million characters .The cartridge is installed
in the machine by opening the printer cover, with automatic printhead positioning if
the printer is powered on or manual positioning if powered off, and lifting the print
assembly by using the appropriate green lever.
INDELIBLE NYLON SNUG CART RIBBON CARTRIDGE
The same as the BLACK NYLON SNUG CART but with indelible ink.
Fig. 1-2 PR9 Ribbon Cartridge
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
6
of
112
1.5. LOCATING THE PRINTER'S MAJOR COMPONENTS
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
7
of
112
Fig. 1-3 Major Components of PR9
Note: The max. open angle of top cover is 90°, for a better view the open
angle is 180°in the figure above
1.6. LOCATING THE PRINTER'S MAJOR INTERNAL
COMPONENTS
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
8
of
112
Fig. 1-4 PR9’s Major Internal Components
1.7. GENERAL BLOCK DIAGRAM
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
9
of
112
POWER CORD POWER SWITCH/POWER
SUPPLY UNIT
PR9
MAIN BORAD
USB
INTERFACE
PARALLEL
INTERFACE
OPERATING
PANEL
PRINTHEAD
FRONT PAPER
DETECTION
PHOTOSENSOR
SERVICES MOTOR
PAPER FEED
MOTOR
SERIAL
INTERFACE
CARRIAGE
TRANSPORT MOTO
AUTOBORDER
PHOTOSENSOR
CARRIAGE RESET
PHOTOSENSOR
1.8. OPERATING COMMANDS
PR9 operating commands are the following:
－ power switch
－ upper mechanical assembly green lifting lever
－ LCD operating panel
1.8.1. POWER SWITCH
The printer is equipped with a two-pole power switch. The switch on/off command
is provided by means of a rod that crosses the printer longitudinally.
1.8.2. UPPER MECHANICAL ASSEMBLY LIFTING LEVER
The upper mechanical assembly lifting lever (1) is located on the left-hand side of
the printer and is used to lift the upper part of the mechanical assembly so that you
Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
10
of
112
can access the internal paper path so that paper jams can be cleared and the
r
ibbon cartridge
replaced without needing to power off the printer.
To access this lever, lift the printer cover about 45 degrees until it stops.
Fig. 1-5
Note: The max. open angle of top cover is 9
0°, for a better view the open angle
is 180°in the figure above
1.8.3. LCD OPERATING PANEL
The HMI (Human-machine interface) of the PR9 is mainly consisted of the
operating panel (it has 5 keys, 4 LEDS and 160*32 LCD). You can access the
different machine states、operating guide and etc. By powering on the printer, you
can select and finish a serials of operations including off-line operation, off-line
printing, menu setup and so on by pressing key. The PR9 offers more friendly HMI
and it make the operation easier and humanization.
1.9. LCD PANEL
1.9.1. OPERATING PANEL
STATION 1 STATION 2
2READY
1ON
3 4
160×32LCD
FEED/EJECT
COMPRESS
STOP
STATION 1
LED
STATION 1
KEY
READY
LED
STATION 2
KEY
STATION 2
LED
FEED/EJECT
KEY
STOP
KEY
COMPRESS
KEY
LCD displ y
POWER
LED
Tabla de contenidos
