Safeline MX3+ Manual de usuario
SafeLine
MX3+
01.2018
52
88
13
11
www.safeline-group.com
MANUAL
MX3+ v1.06 EN
Lift emergency telephone
2
SafeLine
MX3+
MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
TECHNICAL DATA
Supply voltage: 10 to 30 VDC
Supply current: In standby: 50 mA at 12 VDC
When connected: 160 mA at 12 VDC
Alarm button input: 10 to 30 VDC, 5 mA optically isolated
Input: 10 to 30 VDC, 5 mA optically isolated
Output: 2x 12 to 24 VDC, max 200 mA (transistor negative)
Weight: Flush mounted (no button): 535 g
Flush mounted with button: 555 g
Surface mounted (no button): 510 g
Surface mounted with button: 575 g
Car Operating Panel: 380 g
Size (H x W x D): Flush mounted (no button): 155 x 90 x 14 mm
Flush mounted with button: 155 x 90 x 28 mm
Surface mounted (no button): 136 x 78 x 16 mm
Surface mounted with button: 155 x 90 x 31 mm
Car Operating Panel: 88 x 53 x 14 mm
IP class: IP 43
Bluetooth: Bluetooth 4.0
BLE 2,4 GHz
3
MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Troubleshooting 30
SERVICE
Led indication 27
Testing 28
Emergency calling process 29
OPERATING
CONNECT 14
Outputs 15
Configuration interfaces 17
Configuration method 18
Configuration examples 19
Parameter list 20
CONFIGURATION
Overview 5
Measurements and components list 6
Wiring diagram 9
Wiring diagram, output 1 and 2 10
Wiring diagram, External Button 11
Wiring diagram, HL1/HL2 12
Wiring diagram, when updating to MX3+ 13
INSTALLATION
General information 4
Declaration of conformity 4
Safety Precautions 4
INTRODUCTION
Table of contents
4MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Introduction
GENERAL INFORMATION
This unit was built to state-of-the-art technology
and to generally recognised safety related
technical standards currently applicable. These
installation instructions are to be followed by all
people working with the unit, in both installation
and maintenance.
It is extremely important that these installation
instructions are made available at all times to the
relevant technicians, engineers or servicing and
maintenance personnel. The basis prerequisite
for safe handling and trouble free operation of
this system is a sound knowledge of the basic and
special safety regulations concerning conveyor
technology, and elevators in particular.
The unit may only be used for its intended
purpose. Note in particular that, no unauthorised
changes or additions may be made inside the
unit or individual components.
Exclusion of liability
The manufacturer is not liable with respect
to the buyer of this product or to third parties
for damage, loss, costs or work incurred as
a result of accidents, misuse of the product,
incorrect installation or illegal changes, repairs
or additions. Claims under warranty are likewise
excluded in such cases. The technical data is the
latest available. The manufacturer accepts no
liability arising from printing errors, mistakes or
changes.
DECLARATION OF CONFORMITY
Download ”The declaration of conformity” at our
website: www.safeline-group.com
SAFETY PRECAUTIONS!
• Only trained professionals, who are authorised
to work on the equipment, should install and
configure this product.
• This quality product is dedicated for the
lift industry. It has been designed and
manufactured to be used for its specified
purpose only. If it is to be used for any other
purpose SafeLine must be contacted in
advance.
• It should not be modified or altered in any way,
and should only be installed and configured
strictly following the procedures described in
this manual.
• All applicable health and safety requirements
and equipment standards should be
considered and strictly adhered to when
installing and configuring this product.
• After installation and configuration this
product and the operation of the equipment
should be fully tested to ensure correct
operation before the equipment is returned to
normal use.
Electrical and electronic products may contain
materials, parts and units that can be dangerous
for the environment and human health. Products
marked with the WEEE mark (shown below),
shall not be disposed together with your normal
household waste. Please inform yourself about
the local rules and disposal collection system for
electrical and electronic products. The correct
disposal of your old product will help to prevent
negative consequences for the environment and
human health.
(WEEE = Waste of Electrical & Electronic
Equipment).
5
5
3
2
1
4
MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Installation
OVERVIEW
1. Connections
2. RS232 PC connection
Firmware update and configuration with SafeLine Pro
.
3. Volume control
To increase volume, press Button ”2”; to decrease
volume, press Button ”8”.
It is also possible to adjust the volume in the
SafeLine CONNECT app (available on both Google
Play and Apple App Store).
4. Output for additional voice unit
5. Keyboard
6
90
76
155
141
52,5
88
12,1
13,6
4 x Ø6
R5
90
76
141
155
119
52,6
4 x Ø6
22
27,5
R5
MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Installation
Flush mount SafeLine MX3+ with pictograms
Article number: *SLMX3-REC-PIC
Flush mount SafeLine MX3+ with
pictograms and emergency alarm button
Article number: *SLMX3-REC-PICB
MEASUREMENTS AND COMPONENTS LIST
7
102,2
43,6
77,6 16,2
136,2
2 x Ø4,5
R5
90
155
117
54 30,7
2 x Ø4
R5
MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Installation
Surface mount SafeLine MX3+ with
pictograms
Article number: *SLMX3-SM-PIC
Surface mount SafeLine MX3+ with
pictograms and emergency alarm button
Article number: *SLMX3-SM-PICB
MEASUREMENTS AND COMPONENTS LIST
8
52
88
13
11
19
12
35
89
53
12 12
15
MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Installation
MEASUREMENTS AND COMPONENTS LIST
SafeLine MX3+ COP
Article number: *SLMX3-COP
SafeLine MX3+ COP 3mm ledpictogram
Article number: *SLMX3-COP2
9
!
!
MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Installation
WIRING DIAGRAM
PINK
GREY
YELLOW
GREEN
BROWN
WHITE
Voltage supply +10 - 30 VDC
Voltage supply 0 VDC
Additional input (filter)
Input alarm button
Telephone line in
Output 1
Output 2
Additional alarm button, only N/O.
NOTE: *Cable13 is required.
Additional Voice Unit
For example: LT-STAT01
BROWN
WHITE
BROWN
WHITE
Parallel-wiring, SafeLine MX3+ on PSTN Line (max 9 units)
Telephone line in
In order to access the unit remotely, it needs to
be assigned a unit number.
Please refere to the Parameter list (*82*) for
more information.
NOTE:
Please refer
to the Parameterlist
*88* for programming
information.
*Cable13 is required.
When connecting an additional remote
station *Cable14 is required.
10
CABLE13
MX3+
MX3+ v1.06 EN
© 2018 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Installation
or
In this example the settings
are configured as:
Output 1: Alarm
*88*13#
Output 2: System failure
*88*22#
In this example the settings
are configured as (default):
Output 1: Yellow Pictogram
*88*10#
Output 2: Green Pictogram
*88*20#
WHITE
BROWN
WHITE
BROWN
Green Pictogram
Yellow Pictogram
WIRING DIAGRAM, OUTPUT 1 AND 2
Requires that the output is configured for the
corresponding function.
Please refere to the Parameter list (*88*) for
more information.
for example for example
Use CABLE13 to connect SafeLine MX3+ with
external accessories.
+
10 - 30 VDC
max 200 mA
+
10 - 30 VDC
max 200 mA
Otros manuales para MX3+
3
Tabla de contenidos
Otros manuales de Módulo GSM/GPRS de Safeline
