Safavieh CLF1016A Manual de usuario
CLF1016A BK
ITEM#:CLF1016A
SIZE:φ42"X14"H
42-INCH CRYSTAL CEILING FAN
42-INCH CRYSTAL CEILING FAN
2
Safety Information
Pre-Installation
Hardware included
Celing
Hanging the Fan
Attaching the Fan Blades
Attaching the Lights
Install the crystal shade
Use of remote control
Care and cleaning
2
3
4
5
6
7
8
9
10
11
3
15.47lb
7.02kg 1.77cu.ft.
14.02lb
6.36kg
42 in
4067
2075
4
FF
GG
HH
II
JJ
FF Motor housing screw and lock washer(preassembled)
GG Light kit mounting screw(preassembled) 3
HH Light holder thumbscrew(preassembled) 4
II Plastic wire nut(not to scale) 3
JJ Pull chain and fob (not to scale) <hand pull chain only>
3 3
Mounting plate Light Kit
G
5
1.install the fan
Carefully lift the fan motor assembly and insert
the T section of the motor mounting plate into
the slot in the mounting plate.
Mounting plate<A>
Mounting plate<A>
6
Swing the motor assembly up into position under
the motor mounting plate.Secure the motor
mounting plare to the mounting plate with the
screws and lock washer provided
Carefully lift the motor housing onto the mounting
plate,properly align the holes and tighten the
motor housing with the four screws and lock
washer supplied.
2.Finishing the fan installation
7
8
REDRED
G45 4W*3PCS
9
3.Please use on/off type"A" bulb max 60-watt or cfl bulb max 13-watt
or led bulb max 9-watt, there is led 4-watt bulb in the box .
4. Hang the crystal
5.Connect the chain to the fan and the light switch.(hand pull chain only)
1.Select the appropriate bulb and install it on the lamp holder.
2.Hang the crystal shade string on the lamp.
Turn on the power and check the operation of the fan.The
remote controls the fan speed and light.
(hand pull chain only)
10
Remote control wiring diagram
Tabla de contenidos
