Runcom Technologies WiMAX RNU4000BS Manual de usuario
WiMAX
RNU4000BS Base Station
User Manual
Doc
: Runcom RNU4000BS User Manual RN
-
PMG
-
041112 V
-
3.4
Preface Material RNU4000BS User Manual
II Runcom Technologies Ltd.
About this Guide
This User Manual describes the procedures for commissioning, mounting, installing and managing the
RNU4000BS Base Station.
Notice
This document contains proprietary and confidential material of Runcom td. Any unauthorized
reproduction, use or disclosure of this material, or any part thereof, is strictly prohibited. This document
is solely for the use of Runcom td. employees and authorized Runcom td. customers.
The material furnished in this document is believed to be accurate and reliable. However, no
responsibility is assumed by Runcom td. for the use of this material. Runcom td. reserves the right to
make changes to the material at any time and without notice.
All other trademarks are the property of their respective owners. Other company and brand products and
service names are trademarks or registered trademarks of their respective holders.
Safety Precautions
To avoid injury and to prevent equipment damage, observe the safety precautions below.
•Only qualified personnel should be allowed to install, replace, and service the
equipment. The device cannot be sold retail, to the general public or by mail order. It
must be sold to dealers. Installation must be controlled. Installation must be performed
by licensed professionals. Installation requires special training. The Runcom radios and
antennas should be installed ON Y by experienced installation professionals who are
familiar with local building and safety codes and, wherever applicable, are licensed by
the appropriate government regulatory authorities. Failure to do so may void product
warranty and may expose the end user or the service provider to legal and financial
liabilities.
•Always observe standard safety precautions during installation, operation and
maintenance of this product.
•This equipment must be installed according to country national electrical codes.
•Any changes and modifications to the device and the accessories must be approved by
Runcom.
•All equipment and accessories must be installed in a restricted access area.
•Observe all the labels on the equipment, providing operation details and warnings.
•Read and follow the installation instructions provided in this manual.
•The outdoor base station should be positioned more than 2 meters from humans.
•In case of using cables that are not provided with the equipment package, ensure these
cables comply with the regulatory inspection authorities and are the responsibility of the
customer.
•Do not move or ship equipment unless it is properly packed in its original wrapping and
shipping containers.
Electrical Shock Prevention
•When connecting equipment to the AC and DC voltage supplies, ensure proper polarity.
•Disconnect the power source before installing or maintaining the power wiring.
•Do not operate the equipment if there is any failure or damage to electrical
components.
•Do not touch exposed connections, components or wiring when power is on.
RNU4000BS User Manual Preface Material
Runcom Technologies Ltd. L III
•Install the equipment and the grounded DC supply circuits in adjacent cabinets.
•Protect the DC power source with an adjacent circuit breaker.
•The equipment must be properly grounded before attempting to operate or perform any
repairs.
RF Exposure
To avoid RF exposure - Installation of antennas must comply with the FCC RF exposure
requirements.
Radio Interference
This equipment generates and radiates radio frequency energy and if not installed and used
in accordance with the instruction manual, may cause interference to radio communications.
To avoid interferences:
•Avoid conjunction with any other antenna or transmitter.
•In case of Radio Interference: Relocate the antenna and Increase separation between
the equipment and the receiver (e.g. connect to a separate circuit or outlet).
•When using an external antenna, the external antenna must not be co-located or
operating in conjunction with any other antenna or transmitter
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Note:
Contention Based Protocol (CBP) MUST be activated for the specified band (3.675-3.700GHz)
wherever FCC rules and regulations are enforced. Failure to comply makes the operation of this device
illegal.
RNU4000BS User Manual Table of Contents
Runcom Technologies Ltd. V
Table of Contents
1 Introducing the RNU4000BS BS ....................................................................................... 1
1.1 Coverage Configurations ..............................................................................................................3
1.2 RNU4000BS Interfaces and Accessories.........................................................................................5
1.2.1 GPS, Power and Communication Interfaces ..........................................................................5
1.2.2 BS RF Antenna Interfaces ...................................................................................................7
1.3 Supported Antennas.....................................................................................................................7
1.3.1 RF Antennas ......................................................................................................................7
1.3.1.1 Internal Antennas...................................................................................................7
1.3.1.2 External Antenna....................................................................................................7
1.4 Optional Accessories ....................................................................................................................8
2 WEB GUI description ........................................................................................................ 9
2.1 WEB GUI Menu description.........................................................................................................10
2.2 WEB GUI working screens description .........................................................................................10
3 Commissioning Procedure ............................................................................................. 24
3.1 Overview...................................................................................................................................24
3.2 Connect BS to Power and Computer............................................................................................25
3.2.1 Configure the Computer's Network Parameters ..................................................................25
3.2.1.1 Configure Computer IP Address.............................................................................25
3.2.1.2 Disable Firewall ....................................................................................................28
4 Installing the RNU4000BS BS......................................................................................... 29
4.1 Mounting the Base Station..........................................................................................................29
4.1.1 BS Installation ocation.....................................................................................................29
4.1.2 Mounting Bracket Description............................................................................................30
4.1.3 Mounting On a Pole ..........................................................................................................32
4.1.4 Mounting On a Wall ..........................................................................................................34
4.2 Overview of the Cable and Power Connections ............................................................................36
4.3 Mounting the RF Antennas .........................................................................................................38
4.3.1 Mounting the RF Antenna .................................................................................................38
4.3.1.1 RF Antenna ocation Criteria.................................................................................38
4.3.1.2 RF Antenna Mounting ...........................................................................................38
4.3.1.3 4x4 antennas Outdoor Connection Requirements ...................................................39
4.4 Pole Mounted GPS Antenna ........................................................................................................40
4.4.1 GPS Antenna Installation...................................................................................................41
4.4.2 Criteria for selecting the GPS antenna location ...................................................................41
4.4.3 GPS antenna mounted to the RNU4000BS body .................................................................41
Table of Contents RNU4000BS User Manual
VI Runcom Technologies Ltd.
4.4.4 Multi-sector Daisy-chained GPS Antennas...........................................................................42
4.4.4.1 Hardware Interconnections ...................................................................................42
4.4.4.2 Configuration Parameters......................................................................................42
4.5 End-to-End Traffic Test ..............................................................................................................42
4.5.1 Performing a PING Test ....................................................................................................43
5 Field Test Performance Evaluation.................................................................................44
5.1 Field Test Overview....................................................................................................................44
5.2 Field Test Setup .........................................................................................................................45
5.3 Field Test Procedure ..................................................................................................................47
6 Technical Specifications .................................................................................................49
6.1 RNU4000BS BS Specifications .....................................................................................................49
6.2 External Dual-Slant RF Antennas Specifications ............................................................................51
6.2.1 Dual-Slant Antenna 2.3-2.7 GHz; 17 dBi; 65° (MT-364054/ND) ...........................................51
6.2.2 Double-dual Slant 2300-2700 MHz Remote Tilt-Panel Antenna ............................................52
6.2.3 Dual-Slant Antenna 2.3-2.7 GHz; 16 dBi; 60° (SP2327-16XP60NUF) ..................................53
6.2.4 Dual-Slant Antenna 2.3-2.7 GHz; 15 dBi; 90° (SP2327-15XP90NUF) ..................................54
6.2.5 Dual-Slant Antenna 3.3-3.8 GHz; 17 dBi; 65° (MT-404067/ND) ...........................................55
6.2.6 Dual-Slant Antenna 3.3-3.8 GHz; 17 dBi; 65° (SP3338-17XP65) ...........................................56
6.2.6.1 Radiation Patterns ................................................................................................57
SP3338-17XP65 elevation plane ..................................................................................................57
6.2.7 Dual-Slant Antenna 3.3-3.8 GHz; 17 dBi; 90° (SP3338-17XP90) ...........................................58
6.2.7.1 Radiation Patterns ................................................................................................59
SP3338-16XP90 elevation plane ..................................................................................................59
6.2.8 Dual-Slant Antenna 4.9-5.95 GHz; 16 dBi;90º (MT- 464018/ND) .........................................60
6.3 RNU4000BS Internal Antenna Specifications ................................................................................61
6.4 GPS Antenna Specifications ........................................................................................................62
RNU4000BS Base Station User Manual Introducing the RNU4000BS BS
Runcom Technologies Ltd. 1
1 Introducing the RNU4000BS BS
Runcom's RNU4000BS fully integrated outdoor WiMAX BS provides flexible, cost-effective
WiMAX network deployment solutions where increased capacity and coverage is required.
‘All-in-one’ architecture combined with simple, single-handed installation and fast rollout
make these BSs an ideal solution for operators that want to get in on the ground floor of WiMAX
deployment at significant CAPEX reductions and maximum return on their network deployment.
The RNU4000BS is designed for coverage flexibility: depending on the required scenario,
the same BS can be configured to cover more sectors with relatively sparse concurrent user
requirements or fewer sectors with higher needs.
RNU4000BS BSs provide adaptable solutions, allowing interoperability with other MSS
devices as well as ASN-GW vendors.
Introducing the RNU4000BS BS RNU4000BS Base Station User Manual
2 Runcom Technologies Ltd.
Features
•All-in-one integrated packaging of RF and Baseband components.
•Full compliance with IEEE802.16e-2005 according to the WiMAX Forum profiles.
•Frequency Bands (model dependent): 705–745MHz, 2.3-2.7GHz, 3.3-3.8GHz (CBP ca ability for
band 3.675-3.700GHz is required), 4.9-5.0GHz other bands are optional.
•Supports MIMO 2x2, HARQ, and other state of the art features which increase performance.
•4 channels ready unit – 2 channels supplied by default can be license-key activated for 4 channels.
•Transition Power – 2 or 4 x Tx, 28dBm each.
•Antenna support - model dependent: either four external or internal antennas.
•Integrated GPS receiver for time and clock synchronization with holdover for satellite signal loss.
•Flexible coverage capabilities – greater coverage area or greater penetration capabilities
•Small footprint, single-handed quick installation and simple provisioning
•Fast roll-out for service providers
•Seamless and cost-effective integration with a Backhaul network
•Optional integrated backhaul link via WiMAX R1 interface
•High performance with Quality of Service (QoS) settings, according to WiMax standards.
•Support for the latest R6 interface and GRE tunneling to ASN-GW
•Remote NMS management via Runcom’s NMS application
RNU4000BS Base Station User Manual Introducing the RNU4000BS BS
Runcom Technologies Ltd. 3
1.1 Coverage Configurations
RNU4000BS supports either two or four RF channels and can provide coverage for either
one, two or four sectors depending on the sector density (throughput capacity) and radio performance
requirements (note that internal antenna can be used for single sector coverage only):
•Single-Sector solution of 4x4 – (for internal and external antennas) – used for
higher density sites: four channels for Tx and four channels for Rx MRC. This
configuration improves coverage through diversity and improve throughput through
MIMO 4x2.
•Dual-Sector solution of 2x2 (only relevant for external antennas) – used for lower
populated sites: two channels for Tx channels and two channels for Rx MRC. MIMO
of 2x2 can be perform if signal to noise ratio is good.
•Quad-Sector solution of 1x4 (only relevant for external antennas) – used for more
sparsely populated sites: single channel for Tx and single channel for Rx. This
configuration is highly cost effective but suffer from lower performance and
coverage area per sector (totally it covers more space)
The overall capacity, of single base station unit, with respect to the maximum number of
connected users, supported bands and throughput is constant; however, in a dual-sector installation, the
BS will transmit to two separate sectors in a cell, where each sector is serviced by two antennas. In quad
sector installation the BS will transmit to four sectors in a cell (Usually covers the entire cell 3600) ,
where each sector is serviced by one antenna. These two configurations reduce CAPEX and OPAX for
operators by covering cells with relatively low density or sparsely populations, which have low
requirements for concurrent user’s and / or lower data traffic.
The following figure shows a single sector covered by 4x Tx/Rx channels. Several of these sectors (within
the same site) should be installed, using the corresponding number of RNU4000BSs, to complete site
coverage. Each site can use single GPS antenna, installed on one of the BS, daisy-chained from BS to
Introducing the RNU4000BS BS RNU4000BS Base Station User Manual
4 Runcom Technologies Ltd.
another, to perform
Figure 1 Single Sector Coverage
Tabla de contenidos
Otros manuales de Accesorios de Runcom Technologies
