RuggON VIKING MT7030 Manual de usuario
VIKING
Mobile Data
Terminal User¡s
Manual
Model: MT7030
v1.1
2
Contents
CONTENTS......................................................................................................................................2
SAFETY PRECAUTIONS.................................................................................................................3
REGULATORY AND CERTIFICATION.............................................................................................4
FCC..............................................................................................................................................4
CE MARKING......................................................................................................................................................... 5
LITHIUM BATTERYSAFETY STATEMENT..........................................................................................................................5
CHAPTER 1. PRODUCT INTRODUCTION......................................................................................6
HARDWARE SPECIFICATIONS.............................................................................................................................. 6
ENVIRONMENT....................................................................................................................................................... 7
I/O PORTS.............................................................................................................................................................. 8
DIMENSION ANDWEIGHT ..................................................................................................................................... 9
VIKING Standard......................................................................................................................9
PACKAGE LIST.....................................................................................................................................................10
CHAPTER 2. HARDWARE INSTALLATION ......................................................................................... 11
INSTALLING/REMOVING THE SIMCARD............................................................................................................11
CHAPTER 3. HARDWARE MOUNTING......................................................................................... 12
CHAPTER 4. START UP................................................................................................................ 12
POWERING THE SYSTEM....................................................................................................................................12
Installation Instructions............................................................................................................13
LED STATUS........................................................................................................................................................................17
ADJUST THESPEAKER VOLUME........................................................................................................................18
AUTO-BRIGHTNESSADJUSTMENT....................................................................................................................18
INTERNAL MICROPHONE.....................................................................................................................................19
PROGRAMMABLE BUTTONS...............................................................................................................................19
POWER MANAGEMENT.......................................................................................................................................19
CHAPTER 5. JUMPERS AND CONNECTORS..............................................................................20
BOTTOM VIEW .....................................................................................................................................................20
EXTERNAL CONNECTORS PINASSIGNMENTS.................................................................................................21
Power Connector.................................................................................................................... 21
3
Safety Precautions
4
Regulatory and Certification
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference thatmay
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to whichthe
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables and shielded AC power cable must be employed with this
equipment to insure compliance with the pertinent RF emission limits governing this device.
Changes or modifications not expressly approved by the system¡s manufacturer could void
the user¡s authority to operate the equipment.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user¡s authority to operate the equipment.
This device is operable in 5.15 ¡ 5.25GHz frequency range, then restricted in
indoor use only, Outdoor operations in the 5.15 ¡ 5.25GHz is prohibitive.
5
.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least
20 cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. End-users and installers must be provide with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure compliance.
CE Marking
This product has passed the CE test for environmental specifications when shielded cables
are used for external wiring. We recommend the use of shielded cables. Please contact your
local representative for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for
passing included the equipment being operated within an industrial enclosure. In order to
protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage,
we strongly recommend the use of CE-compliant industrial enclosure products.
Lithium Battery Safety Statement
Lithium battery inside. Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type of battery recommended by battery manufacturer.
THIS PRODUCT CONTAINS LITHIUM-ION BATTERY PACKS. IT MUST BE
DISPOSED OF PROPERLY. CONTACT LOCAL ENVIRONMENTAL
AGENCIES FOR INFORMATION ON RECYCLING AND DISPOSAL PLANS IN
YOUR AREA.
6
Chapter 1. Product Introduction
VIKING is an in-vehicle terminal with 7¡ high resolution display and 500nits brightness, and
is flexible to support a wide range of wireless connection capability. The device is well-suited
for fleet management, asset management, EOBR and ELDs application.
It is compliant to ISO 7637-2, SAE J1455 and SAE J1113 and its optimized power system is
designed for cold cranking, load dump, transient voltage and ESD.
The device is engineered with IP65 protection rating, a wide temperature design, wide input
range, and rich expanding interfaces that support in-vehicle connectivity.
Hardware Specifications
Item Description
Processor QualcommR Snapdragon? 660 Octa -Core, 1.9GHz
Memory 3GB LPDDR4 SDRAM
Storage 32GB eMMC, Micro SD slot x 1
Display
7¡ TFT LCD WSVGA (1024 x 600), , 500 nitsbrightness
Viewing angel: 145(H)/ 160(V) (CR>10)
Support auto-dimming
Touch Panel Capacitive multi touch (PCT)
Wireless
Connectivity
GNSS (GPS / GLONASS / BeiDou/ Galileo)
4G LTE / WCDMA / GSM
IEEE 802.11ac 2x2 MU-MIMO
Bluetooth V5.0
RFID/ NFC
Item Description
Power Input 9-36VDC,5A
Battery 1950mAh, 3.6V
Housing
(Mechanical)
PC+ABS, fanless design
Certification CE, FCC, CB
7
Environment
Operating temperature:
-20¢C (-4¢F) to 60¢C (140¢F)
In accordance with MIL-STD-810H Method 501.7 High Temperature Procedure II -
Operation
In accordance with MIL-STD-810H Method 502.7 Low Temperature Procedure II -
Operation
Storage temperature:
-30¢C (-22¢F) to 70 ¢C(158¢F)
In accordance with MIL-STD-810H Method 501.7 High Temperature Procedure I -
Storage
In accordance with MIL-STD-810H Method 502.7 Low Temperature Procedure I -
Storage
Relative humidity: 5% to 95% @ 30¢C (86¢F) to 60¢C (140¢F) non-condensing in
accordance with MIL-STD-810H Method 507.6 Humidity Procedure II Aggravated
Cycles
Vibration Test:
Operating: MIL-STD-810H Method 514.8 Category 4,
Fig 514.8C-2 Common carrier (US highway truck vibration exposure);
Fig 514.8C-4 Composite two-wheeled trailer;
Fig 514.8C-6 Composite wheeled vehicle.
Operating: IEC 60721-3-5 Class 5M3
Non-Operating: MIL-STD-810H Method 514.8 Category 24 Figure 514.8E-1
General minimum integrity
Shock Test:
Operation: MIL-STD-810H Method 516.8 Procedure 1 Functional Shock
Non-Operation: MIL-STD-810H Method 516.8 Procedure V Crash Hazard Shock
8
I/O Ports
Item Description
Serial RS-232 x 1 with 0/5/12V support 0.6/0.3A (COM1)
RS-232 TX, RX/422/485 x 1 (COM2)
USB USB 2.0 x 2
USB 3.1 type C x 1
Ethernet Gigabit Ethernet (RJ45 ) x 1
Digital I/O DI x 2, DO x 2
CAN Raw CAN bus, optional SAE J1939 support
Audio Audio headset jack x 1
Internal MIC-in x 2
Speaker Waterproof speakers 2W
9
40.80mm
Dimension and Weight
VIKING Standard
Dimension: 219.98 x 151.98 x 40.80 (mm) / 8.66 x 5.98 x 1.61 (in.) (W x H x D)
Weight: 1.25 kg/ 2.76 lbs.
Front View Dimension
219.98mm
151.98mm
Side View Dimension
10
Package List
Before you begin the installation or configuration process, make sure to inspect all the
components and accessories. Contact your representative if there are any missing or
damaged items.
Please verify the delivery of the contents upon receipt
VIKING in-vehicle terminal
2M Power cable with fork terminals
NOTE: The packaging material has been selected to optimally protect your device. After
unpacking, store the original packaging material in the event that you need to return for
shipment.
Tabla de contenidos
Otros manuales de Portátil de RuggON
