RSE RSEDDRADIO Manual de usuario
1
Operator’s Manual
www.rse.co.nz
Double Din Mul-Media System
2
3
Contents
Installaon…………………………………………………………………………………………………….4
Frame Buon Descripon...……………………………………………………………………..……4
Main Menu………….………………………………………………………………………………………..5
Radio……………………………………………………………………………………………………………..5
Playing Disc……………………………………………………………………………………………………6
Bluetooth Operaon……………………………………………………………………………………..7
Phone Calling Instrucons……………………………………………………………………………..7
Phone Calls.…………………………………………………………………………………………………..7
Phone Dialling……………………………………………………………………………………………….8
Phone Book…………………………………………………………………………………………………..8
Phone Music………………………………………………………………………………………………….8
System Seng……………………………………………………………………………………………….9
Mirror Link…………………………………………………………………………………………………….9
Sound Sengs.……………………………………………………………………………………………10
Display Sengs……………………………………………………………………………………………10
Media Sengs…………………………………………………………………………………………….11
Bluetooth Sengs……………………………………………………………………………………….11
Time Sengs……………………………………………………………………………………………….12
Light Sengs……………………………………………………………………………………………….12
Car Steering Sengs……………………………………………………………………………………13
Touch Calibraon…………………………………………………………………………………………13
Factory Sengs……………………………………………………………………………………………13
Remote Control……………………………………………………………………………………………14
Wiring Diagram……………………………………………………………………………………………15
4
Installaon
This unit is designed for 10-16.8V negave ground operaon system only. Before installing
this unit make sure your vehicle is connected to 10-16.8V negave grounded electrical
system.
The negave baery terminal must be disconnected before making connecons, this will
reduce the risk of damage from a short circuit.
Ensure you connect the colour coded leads as per the diagram. If you connect these
incorrectly if may cause the unit to malfuncon or damage the vehicles electrical system.
Ensure you connect the negave speaker leads to the negave speaker terminal and never
connect the le and right channel speaker cable to each other or the vehicle body. Do not
block any vents or radiator panels as this could cause heat to build up and may result in a
re.
Aer you have completed the installaon of this unit including reconnecng the baery,
press the reset buon once on the front panel with a pointed object (ballpoint pen) to set
the unit to inial status.
Frame Buon Descripon
PWR: Long press power on/o
MUTE: Turn o sound
VOL+: Volume up
VOL-: Volume down
Menu buon
BAND: Short press is Radio transion, press for selecon of FM1, FM2, FM3, AM1,
AM2. Long press for 3 seconds to come into the screen touch calibraon interface
MIC: Microphone
AUX: AUX In
USB: USB port
SD: SD port
IR: Remote control sensor
RES: Reset buon, factory default
Eject disc
5
Slide the screen to the le and right below the top line to access the next menu page.
Touch the desired icon to enter.
Main Menu
To return to the main menu press the backwards arrow in the top corner
Short touch on the le and right arrows will move you to the next frequency
Long touch on the le and right arrows will enter manual search
To switch to FM1, FM2, FM3, AM1 and AM2 press the FM1 Buon on the le
To set Pre-set Staon:
Once you have searched for the preferred staon press the icon posion down the boom,
hold unl preferred staon appears. Connue to set all staons to desired icons.
Radio
6
Playing Disc
From the Home Menu select the disc icon.
Slide the screen to the le of right from the boom toolbar to access the next toolbar.
Back to main menu
Menu catalogue
Play/Pause
Stop playing
Random play
Repeat play
Angle control opon
Zoom in and out
Slow down switch
Channel switching
Subtles on/o
Keyboard switch
Short press last song, long press rewind
Short press next song, long press fast foward
7
NOTE: Due to dierent brands of devices using dierent Bluetooth modules and soware,
some features may be dierent and some devices may not be compable with this unit.
To connect your device for the rst me please ensure Bluetooth is enabled on your
device. Select the Handsfree icon on the main menu and then search for your device name
in the list and select to pair with it.
If a code is required it will be 0000 or 1234.
Once paired successfully the Bluetooth Icon will be shown in blue at the top of the screen
and the icon on the le hand side will change to green.
Once connected you can make and receive phone calls and play music.
When the Bluetooth Icon is green this means it is connected
To disconnect and reconnect touch this icon
Phone Calling Instrucons
Bluetooth Operaon
Phone Calls
This icon will take you to the Phone page
This icon will update the incoming call records from your phone
This icon will update the outgoing call records from your phone
This icon will update the dismissed call records from your phone
Touch this icon to make a phone call
8
Phone Dialling
This icon will take you to the Dial page
Backspace
Once you have entered the phone number, press this icon to dial out
When you have an incoming call, press this icon to answer the call
Press this icon to hang up or reject a call
This icon will transfer the sound between the phone and radio
Phone Book
This icon will take you to the Phone Book page
Press this icon to upload your phone book
Last page
Next page
Once you have entered the phone number, press this icon to dial out
When you have an incoming call, press this icon to answer the call
Phone Music
On the Home menu, touch “Streaming” to enter the Bluetooth Phone Music.
9
System Seng
Mirror Link
Mirror Link is designed for Android systems. Use a connecon cable to connect the phone
to the unit for music, movies and photos. You can operate the phone via the screen display,
and operate the screen display via the phone.
Note: When using Mirror Link to play music and videos from your mobile phone, please
connect the phone via Bluetooth rst so you can hear the sound.
From here you may alter:
Area
Language
Front Camera
Rear Camera
Headlamp Detecon
Brake Detecon
Subwoofer
Key Beep
Under the main menu select the Sengs icon to enter the sengs menu.
10
Sound Sengs
Display Sengs
Under the seng menu touch display seng icon to enter the display menu.
Under the seng menu touch the sound seng icon to enter the sound menu.
From here you may alter:
EQ
Surround
Field
Loudness
From here you may alter:
Type
Adjust
Tabla de contenidos
