Rosslare AYC-W6500 Manual de usuario

AYC-W6500 Integrated Reader and Controller

Installation & Operating Guide

June 2008

Table of Contents

1. General Information..........................................................3

1.1 Introduction...........................................................................3

1.2 Reader/Controller Types.......................................................4

1.3 Unpacking the Equipment.....................................................4

1.4 Ancillary Equipment.............................................................4

2. Technical Specifications ....................................................5

2.1 Key Features.........................................................................6

3. Installation..........................................................................8

3.1 Mounting the AYC-W6500 ..................................................8

3.2 Wiring Instructions ...............................................................9

4. Reader Functionality.......................................................13

4.1 Modes of Operation ............................................................13

4.2 Enrolling a Fingerprint........................................................15

4.3 Programming the AYC-W6500..........................................16

5. Controller Functionality..................................................31

5.1 Introduction.........................................................................31

5.2 Modes of Operation ............................................................32

5.3 Enrolling a Fingerprint........................................................33

5.4 Door Alarms .......................................................................34

5.5 Case and Back Tamper .......................................................34

5.6 Request to Exit (REX) Function.........................................35

5.7 PS-Ax5T/TU or PS-Cx5T/TU Units...................................35

5.8 Programming the AYC-W6500..........................................35

Appendix A. Limited Warranty .....................................61

Appendix B. Technical Support .....................................63

AYC-W6500 Installation Manual Page ii

General Information

AYC-W6500 Installation Manual

Page 3

1. General Information

The AYC-W6500 is an integrated reader and controller, designed for use

either as a stand-alone unit or in conjunction with Rosslare's BioTrax

software system.

The unit automatically determines whether to function as a reader or as a

controller.

1.1 Introduction

When the AYC-W6500 unit is connected to a standard access controller,

then it functions as a reader.

If the unit is connected to one of Rosslare's intelligent power supplies; PS-

A15T/TU, PS-C15T/TU, PS-A25T/TU, or PS-C25T/TU it functions as a secured

controller.

When the unit operates as a reader, transmission of a Card ID or PIN ID

entered by the user will take place only after successful fingerprint

verification.

When the unit operates as a controller, door output will open after a Card

ID or PIN ID is entered followed by successful fingerprint verification.

For information on how the unit functions as a reader, see Reader

Functionality on page 13.

For information on how the unit functions as a controller, see Controller

Functionality on page 31.

The AYC-W6500 can optionally work with BioTrax software. For more

information on BioTrax software see the BioTrax Software Manual.

The unit is suitable for indoor mounting, accepts up to 500 users, and

allows entry via a personal identification number (PIN) and/or by

presenting a proximity card.

PIN codes may be restricted to a single set length of 4, 5 or 6 digits.

Alternatively, the PIN codes can be a variable length of between 4 and 8

digits.

Using this Manual

This manual contains the following information:

•Installation

•Wiring instructions

•Operation Instructions

General Information

AYC-W6500 Installation Manual Page 4

1.2

1.3

1.4

Reader/Controller Types

Upon power-on reset, the AYC-W6500 searches for the presence of a

Rosslare PS-Ax5T/TU or PS-Cx5T/TU intelligent power supply.

If the power supply is detected, then the AYC-W6500 is automatically

configured as a secure access control unit. Two short beeps (one second

apart) are generated on power-on reset. If the power supply is not

detected, it is automatically configured as a reader indicated by one

short beep generated on power-on reset.

Unpacking the Equipment

Before you begin, please confirm you have received all the items listed

below. If you find any items missing, contact your local Rosslare distributor

immediately.

•One AYC-W6500 unit

•CD with the BioTrax software

•Installation kit

•Installation and operating instructions

•Software manual

•RS-232 cable

Ancillary Equipment

The following equipment is required to complete installation:

Reader

•Compatible host controller (not supplied)—UL listed access

control unit, i.e., AC-225

Controller

•PS-Ax5T/TU and PS-Cx5T/TU (x stands for 1 or 2) intelligent power

supply (for controller applications only, optional)—this unit

connects to the following:

oElectric lock output mechanism or a magnetic lock device,

which implements fail safe (power to lock) or fail secure

(power to open) functions.

oRequest to Exit (REX) button—normally open type. Switch is

closed when pressed.

oGeneral input switch (e.g. door monitor contact).

oAuxiliary output.

Rosslare accessories can be found at www.rosslaresecurity.com.

Technical Specifications

AYC-W6500 Installation Manual

Page 5

2. Technical Specifications

Electrical Characteristics

Power supply type Linear type – recommended

Operating voltage range 10 - 16VDC (provided by the PS-Ax5T/TU

and PS-Cx5T/TU when used as a controller)

Input current standby (12VDC) 140mA

Input current max (16VDC) 330mA

Reader outputs Open collector, 5V termination

Tamper output Open Collector Output

Auxiliary input (LED_CTL) Dry contact, Normally Open.

0-5V

Operational Characteristics

Cable distance to host controller

Up to 500ft (150 meters) using an 18AWG

cable

Normal PIN or Proximity Card + Fingerprint

Verification

Operation Modes

Secure Proximity Card + PIN code + Fingerprint

Verification

Fingerprint Sensor Capacitive biometric fingerprint sensor

No. of Users 500

Fingerprint Templates Up to 1910 templates

(two templates per fingerprint)

Verification Time Less Than 1.5 seconds

Verification Method 1:1

Max proximity card read range*

3 Inches (7.5 cm)

Proximity card modulation ASK at 125 KHz

Proximity card compatibility EM cards

Card Transmit format (Reader) 26-bit Wiegand, or Clock & Data

Keypad 3 x 4 Key, Backlit

Keypad Transmit Format

(Reader) Programmable PIN code formats

LED reader status Two Tri-colored LEDs

Technical Specifications

AYC-W6500 Installation Manual Page 6

Operational Characteristics

Communication RS-232 (to host

computer)

Sensor ESD Rating ±15kV (Fingerprint Sensor)

Environmental Characteristics

Operating Environment -5ºC to +60ºC, 10% - 90% RH (Non-

Condensing), Indoor

Size and Weight Characteristics

Dimensions: 5.16" x 4.92" x 1.38" (131x125x35 mm)

Weight: 270g (0.595lbs)

*Measured using Rosslare proximity card (AT-14) or equivalent. Range also

depends on the electrical environment and proximity to metal.

2.1 Key Features

The AYC-W6500 system includes the following key features:

•Built-In Proximity Card Reader (125 KHz ASK Modulation)

•Built-in Fingerprint Capacitive Sensor

•PIN, Proximity card and a fingerprint identification per user

•Accurate fingerprint verification, using two fingerprint

templates for each user.

•1 second verification time

•BioTrax™ PC software for complete management of the

fingerprint database and fast configuration of the reader

•Up to 500 users

•Optical back tamper sensor and open controller tamper

output

•Programmable keypad backlight options (On, Off, 10 second

activation on key touch)

•Internal buzzer provides audible interface feedback

•Two tri-color Reader status LED reader status

•Two user levels

oNormal User

oSecure User

Technical Specifications

AYC-W6500 Installation Manual

Page 7

•Code Search feature that helps make maintaining user codes

easier

•Plastic case for indoor use

•Comes with mounting template for easier installation

•Comes with an installation kit that includes a security screw

and a security screw tool

Reader and Controller Features

Additional features for the AYC-W6500 series include the following:

Reader

•Programmable keypad transmission format

•Programmable input (LED_CTL) can control either the

operation of the LED or the unit's operation mode.

•Programmable facility code

•Two Modes of Operation

oNormal Mode

oSecure Mode

•Built-In Proximity Card Reader (125 KHz ASK Modulation)

•Programmable Proximity Card Transmission Format

oClock & Data

o26-Bit Wiegand Controller

•Bi-directional secure communication with AC-Ax5T or PS-Cx5T

secured power supply

•Two User Levels

oNormal User

oSecure User

•Request-to-Exit (REX) signal from PS-Ax5T/TU or PS-Cx5T/TU

power supply

•Two Modes of Operation

oNormal Mode

oSecure Mode

•Programmable Lock Output Release, Siren, and Alarm Delay

timers

•Programmable auxiliary input (controlled via the PS-A25T or PS-

C25T power unit)

Installation

3. Installation

The AYC-W6500 is easy to install and fits all standard US and UK gang

boxes.

3.1 Mounting the AYC-W6500

Before connecting the AYC-W6500, mount it on an appropriate surface. In

most circumstances, the unit should be located at approximately shoulder

height.

To Mount the Unit on a Surface

1. Remove the unit's front cover, using the security spline key.

The screw holes on the back plate are now visible.

2. Select an approximate location for the unit.

3. Peel off the back of the self-adhesive installation template and

attach the template to the required location.

4. Using the template as a guide, drill four holes into the surface. The

required hole size is marked on the template.

Figure 1 AYC-W6500 Assembly and mounting

5. Drill an additional 7/16” (10mm) hole for the cable.

When installing the unit on a metallic surface, cover the inside of the

hole with a grommet or electrical tape.

6. When operating the unit as a reader, route the unit's interface cable

to the access controller.

When operating the unit as a secured controller, route the unit's

interface cable to the PS-Ax5T/TU or PS-Cx5T/TU power supply.

Rosslare recommend using a regulated linear power supply.

7. Screw the back plate into the surface. Ensure the screws are the size

specified on the installation template.

AYC-W6500 Installation Manual Page 8

Installation

Note:

It is also possible to mount the unit using any strong epoxy glue.

Apply the glue and then hold the unit's back plate firmly in

place until the glue dries.

8. Re-attach the unit's front cover.

3.2 Wiring Instructions

The unit is supplied with a 16-inch pigtail, having a 10-conductor cable.

To Connect the Unit to the Controller

1. Prepare the unit’s cable by cutting the cable jacket back 1¼ inches

and strip the wire ½ inch.

2. Prepare the controller cable by cutting the cable jacket back 1¼

inches and strip the wire ½ inch.

3. Splice the unit’s pigtail wires to the corresponding controller wires and

cover each connection.

Refer to the wire color table below, and to the wiring diagrams

provided on the following pages.

Controller Reader Color Functionality

5~16 VDC 5~16 VDC Red +DC Input

Shield / Ground Shield / Ground Black Ground

C1 Data 1 White Communication

C2 Data 0 Green Communication

LED_CTL LED_CTL Brown Auxiliary Input

Tamper Tamper Purple Tamper

Tx Tx Blue RS-232 Transmit

Rx Rx Grey RS-232 Receive

Ground Ground Orange RS-232 Ground

N/A N/A Yellow N/A

4. If the tamper output is used, connect the purple wire to the correct

input on the controller when used as reader, or to the zone input of

an intruder alarm system when used as a controller.

5. Trim and cover all unused conductors.

Page 9 AYC-W6500 Installation Manual

Otros manuales para AYC-W6500

Tabla de contenidos

Otros manuales de Controladores de acceso IP de Rosslare

Rosslare

Rosslare AC-425 Manual de usuario

Rosslare

Rosslare AY-B86 0 Series Manual de usuario

Rosslare

Rosslare MD-W11N Manual de usuario

Rosslare

Rosslare AC-425 Manual de usuario

Rosslare

Rosslare AC-020 Manual de usuario

Rosslare

Rosslare AYC-G60 Series Instrucciones de montaje

Rosslare

Rosslare InteliDoor AC-Q41H Manual de usuario

Rosslare

Rosslare DR-B9000 Manual de usuario

Rosslare

Rosslare AC-S43 Manual de usuario

Rosslare

Rosslare AYC-Q4 Series Manual de usuario

Rosslare

Rosslare O2S AY-G6270 Manual de usuario

Rosslare

Rosslare AC-015 Manual de usuario

Rosslare

Rosslare AC-215IP Manual de usuario

Rosslare

Rosslare AY-B9350 Manual de usuario

Rosslare

Rosslare EX-07 Manual de usuario

Rosslare

Rosslare AY-B85x0 Series Manual de usuario

Rosslare

Rosslare AC-215 Manual

Rosslare

Rosslare AY-B91 0BT Series Manual de usuario

Rosslare

Rosslare AC-F43 Manual de usuario

Rosslare

Rosslare AC-425 Manual de usuario

Manuales populares de Controladores de acceso IP de otras marcas

ZKTeco

ZKTeco SpeedFace-V5L Manual de usuario

Jantar

Jantar REX A-1-9 Manual de usuario

2N Access Unit Hoja de instrucciones

Kedacom

Kedacom KSCA120 Series Manual de usuario

H3C

H3C WX2880X Manual de usuario

G4S

G4S S870-EX Guía

PRASTEL

PRASTEL M2000PE Manual de usuario

Allegion

Allegion interflex IF-281 Cylinder Manual de usuario

TECOM

TECOM TS1067E Manual de usuario

Fermax

Fermax Memokey 100C Guía del usuario

Fermax

Fermax CITYLINE MEMOKEY Manual de instrucciones

Software House

Software House iSTAR Pro 2U RM Manual de instrucciones

AKCP

AKCP SP+ Manual de usuario

Bpt

Bpt HNA/102 Manual de usuario

Civintec

Civintec CV9601T-T-1F Manual de usuario

BioMax

BioMax N-X90W Manual de usuario

ZKTeco

ZKTeco OP-200 Manual de usuario

FingerTec

FingerTec s-Kadex Manual de usuario