Page 6of 31
Use and Handling
•Do not use Ronin Lift without the proper safety equipment. Not doing so may
cause serious injury or death
•Only use approved static rope with Ronin Lift personal ascender
•Do not overheat the DC motor. If motor becomes extremely hot discontinue use
until motor has cooled down
•Inspect all equipment prior to each use, including Ronin Lift, safety harness,
carabineer clips, static rope, and helmet.
•Only use safety rated carabineer clips with Ronin Lift
•Do not wet or submerge Ronin Lift. Ronin Lift is not water proof.
•Be careful when caring Ronin Lift, if you do not have a good grip, the device may
drop causing potential damage or injury
•Do not stand on or put objects on the device, and do not stack the device with
other devices
•Keep the device, accessories, and any small components out of reach of small
children
•Stop using the device immediately if you begin to feel tired or if you experience
discomfort or pain in your hands, arms or legs while operating the device
•If you experience any of the following health problems, discontinue use of the
device immediately. If symptoms persist, consult your doctor.
⎯Dizziness, nausea, fatigue or symptoms similar to motion sickness
⎯Discomfort or pain in a part of the body, such as hands, arms or legs
•Do not place device on the floor or in a place where it may cause someone to trip,
stumble or fall
•Do not expose the device to high temperatures or high humidity
•Do not use device in an electrical storm
•Do not touch connectors on device
•Do no wet device on surface that are unstable, tilted or subject to vibration
•Do not allow liquid, small particles or other foreign debris to enter the device
Vents
Do not block any vents. To maintain good ventilation, follow the guidelines below:
•Do not cover ventilation holes
•Do not allow dust to build up on the vents
•Do not allow foreign debris to cover vents
