Roland JUNO-106 Manual de usuario

0101

Parameter Guide

JUNO-106

Model Expansion

2 3 4 5

6 7 8

This document explains about the parameters and setting screens for the ZENOLOGY Pro

Model Expansion.

The parameter names, the order in which they appear and other information may dier,

depending on the product.

1 SystemSystem

CONDITION

Simulates the changes that occur as a unit ages.

PITCH DRIFT

Adjusts the slight pitch drift that occurs when notes are

played on an analog synthesizer.

KEY MODE

[SOLO] button

Sound is produced monophonically.

[POLY] button

Sound is produced polyphonically.

[UNISON] button

Sound is produced in unison.

[SL-UNISON] button

Sound is produced in monophonic unison.

PORTAMENTO [OFF] [ON] button (PORTA MODE/PORTA TIME)

Selects whether portamento is applied to the performance and species the

portamento time.

PORTA CRV

[ORIG] button

Change according to the original

curve of the model.

[LIN] button

Change in a linear curve.

[EXP-1] button

Change in a non-linear curve (gentle

slope).

[EXP-2] button

Change in a non-linear curve (steep

slope).

[PRM EXP] button

(PARAM EXPANSION)

If this is ON, the range of the LFO

RATE, CUTOFF, RESONANCE, and

FILTER ENV DEPTH parameters are

extended beyond the range of the

original model.

2 LFOLFO

[RATE] knob (LFO RATE)

Species the rate of the LFO cycle.

[DELAY TIME] knob (FLO DELAY TIME)

Adjusts the time from when the key is pressed until the

LFO starts to apply modulation.

3 DCODCO

PWM

PM MODE = LFO: Adjusts the modulation depth.

PM MODE = MANUAL: Adjusts the pulse width.

[LFO] [MAN] button (PW MODE)

Selects whether the pulse width is modulated by the LFO

(LFO) or kept at the xed value specied by PULSE WIDTH

MOD (MANUAL).

[ (PWM wave)] button (PW SWITCH)

Turns the PWM wave on/o.

[ (Sawtooth wave)] button (SAW SWITCH)

Turns the sawtooth wave on/o.

[RANGE] knob (OSC RANGE)

Species the octave of the oscillator.

16’, 8’, 4', 2’

LFO (OSC LFO MOD)

Uses the LFO to vary the pitch (vibrato).

USUB (SUB LEVEL)

Adjusts the volume of the sub oscillator.

NOISE (NOISE LEVEL)

Adjusts the volume of the noise.

4 HPFHPF

[FREQ] knob (HPF STEP)

Sets the high-pass lter’s cuto frequency in four steps.

0, 1, 2, 3

5 VCFVCF

[R] [M] [S] buttons (VINTAGE FLT TYPE)

If a vintage type model is selected, these buttons change the type of lter.

[R] models a Roland lter, and [M] and [S] model vintage synthesizers made by

other companies.

[FREQ] knob (CUTOFF)

Species the cuto frequency of the low-pass lter.

The frequency region above the cuto frequency is cut,

producing a more mellow tonal character.

[RES] knob (RESONANCE)

Boosts the region of the lter’s cuto frequency. Higher

values produce a stronger result, giving the sound a

distinctively synthesizer-like character.

Polarity buttons

Specify the polarity of the lter.

ENV (FLT ENV DEPTH)

Adjusts the amount by which the cuto frequency is

controlled by the envelope.

LFO (FILTER MOD)

Adjusts the amount by which the LFO modulates the

cuto frequency.

KYBD (FLT KEY FOLLOW)

Adjusts the amount by which the keyboard pitch aects

the cuto frequency (key follow). With smaller values, the

cuto frequency becomes lower as you play higher notes.

6 VCAVCA

[LEVEL] knob (AMP LEVEL)

Adjusts the volume of the tone.

[ENV] [GATE] button (AMP ENV SEL)

Species whether the volume is controlled by the ENV

(ENV) or by the gate signal (GATE).

7 ENVENV

Envelope

You can edit the ADSR settings of the envelope.

[A] knob (ENV ATTACK)

Adjusts the Attack time.

[D] knob (ENV DECAY)

Adjusts the Decay time.

[S] knob (ENV SUSTAIN)

Adjusts the Sustain level.

[R] knob (ENV RELEASE)

Adjusts the Release time.

8 MFXMFX

MFX parameters

The edit screen is dierent for each MFX type.

[MFX] button

Turns MFX on/o.

[MFX TYPE] indication

Shows the currently selected

MFX name.

[MFX LEVEL] knob

Adjusts the MFX output level.

Otros manuales para JUNO-106

Tabla de contenidos

Otros manuales de Sintetizador de Roland

Roland

Roland Juno-GJ Manual de operación y mantenimiento

Roland

Roland G-70 Manual de usuario

Roland

Roland JV-2080 Manual del propietario

Roland

Roland FANTOM-6 Manual de usuario

Roland

Roland GW-7 Manual de usuario

Roland

Roland GR-300 Manual de usuario

Roland

Roland JV-50 Manual de usuario

Roland

Roland Piano plus 350 Manual de usuario

Roland

Roland AX-EDGE Manual de usuario

Roland

Roland SH-201 Manual de usuario

Roland

Roland EP-20 Manual de usuario

Roland

Roland JV80 Manual de usuario

Roland

Roland JV-30 Manual de usuario

Roland

Roland JUNO-106 Manual de operación y mantenimiento

Roland

Roland E-16 Manual de usuario

Roland

Roland Fantom-G none Instrucciones de instalación y funcionamiento

Roland

Roland JX-10 Manual de usuario

Roland

Roland SH-101 Manual de usuario

Roland

Roland JV-30 Manual de usuario

Roland

Roland JUNO-106 Manual de usuario

Roland

Roland G-800 Manual de usuario

Roland

Roland BK-9 Performance Editor Manual de usuario

Roland

Roland Gaia SH-01 Manual de usuario

Roland

Roland Vocoder Plus VP-330 Manual de operación y mantenimiento

Manuales populares de Sintetizador de otras marcas

Kawai

Kawai MP7 Manual técnico

Joranalogue

Joranalogue Contour 1 Manual de usuario

Full Bucket Music

Full Bucket Music Mono/Fury Manual de usuario

Kawai

Kawai PH50 Manual de usuario

IK Multimedia

IK Multimedia UNO Synth PRO X Manual de usuario

Behringer

Behringer DEEPMIND 12 Manual de usuario

Gotharman

Gotharman Gotharman's anAmoNo-box Manual de usuario

Yamaha

Yamaha DX21 Manual de usuario

QuStream

QuStream HDFS-550 Manual de usuario

Modal Electronics

Modal Electronics ARGON8 Manual de usuario

Octave

Octave Cat SRM Manual de usuario

Dreadbox

Dreadbox Murmux Initiate Manual de usuario

neutral labs

neutral labs ELMYRA 2 Manual de usuario

Waldorf

Waldorf KYRA Manual de usuario

Tubbutec

Tubbutec Juno-66 Manual de usuario

EFM

EFM VCADSR - 3510 Manual de usuario

Yamaha

Yamaha MOTIF XF Manual de usuario

Korg

Korg Poly-800 Manual de usuario