Roland GS-10 Hoja de instrucciones
1
Read This First
Thank you and congratulations for selecting the BOSS GS-10 Guitar Effects System with USB Audio Interface.
This package contains accessories allowing you to connect the GS-10 to your computer using USB to get even more out of the
GS-10’s great features.
In order to achieve a full understanding of the GS-10’s superior functions and capabilities, be sure to read this material before
using the GS-10.
Package Contents
■
GS-10
■
AC Adaptor
To avoid damaging your equipment, use only a BOSS
BRC Series adaptor.
■
USB Cable
Use this to connect the GS-10 with your computer.
To transfer data between the GS-10 and your computer
using software such as GS-10 Editor, you must first
install the USB drivers.
■
GS-10 Owner’s Manual
This volume describes the GS-10’s functions and
explains how to operate the unit. Keep this manual at
hand so that you can refer to it whenever needed.
■
GS-10 Software CD-ROM
This contains special software for use when the GS-10 is
connected to a computer. The CD-ROM includes
software for Windows and Macintosh operating systems.
Before you install and setup the software, please read the
section “About the GS-10 Software” in this leaflet.
GS-10 Drivers
These ASIO/WDM-compatible GS-10 drivers are for use
when the GS-10 is connected to a computer via USB.
In addition to handling 24-bit digital audio signals, these
also allow simultaneous reception and transmission of
MIDI messages.
They are also used for communication by GS-10 Editor
and Librarian.
GS-10 Editor
This software allows you to edit the GS-10’s settings
from a computer. You can save the tone settings
(patches) you create as files on the computer.
GS-10 Librarian
This software lets you manage all of the GS-10’s patches
from your computer.
■
Service Information Sheet
■
Cakewalk Music Creator Manual
This provides instructions on installing, setting, and
operating Music Creator.
Cakewalk Software License Agreement
The Cakewalk Software License Agreement is found at
the end of the “Getting Started.”
The Cakewalk Software License Agreement is a contract
licensing the use of Music Creator.
This agreement licenses the user to use software
copyrighted by Twelve Tone Systems, Inc. of the United
States.
Be sure to read this agreement before opening the CD-
ROM package.
■
Cakewalk Music Creator CD-ROM
Cakewalk Music Creator is an authentic yet easy-to-use
music creation software application (for Windows only).
You can use it to record, edit, and play back both audio
and MIDI data, allowing you to create music using the
GS-10’s functions.
2
Read This First
Signal Flow
The following shows an example with devices connected to the GS-10 and the signal flow among the devices.
Precautions concerning use of the GS-10
The following are points to which you should pay particular attention when using the GS-10. Also make sure to read the related
items in the Owner’s Manual.
■
Switching Input Signals (INPUT SELECT)
With the GS-10, you can switch input for each patch allowing you to use guitar, as well as using bass, microphone, USB, and
AUX inputs.
When the device you are actually connecting to the GS-10 differs with the settings made here, the sound may not be output,
or the effect you intended may not be produced. Make sure that the devices used are configured correctly.
■
Switching Output Signals (DIRECT MONITOR)
When playing sounds through the speakers or headphones while recording using USB, you can select whether to have the
GS-10’s effect signals output directly, or to output the monitor signals from the application being used for recording (Owner’s
Manual; p. 79).
You can also work with these settings from an ASIO-compatible application (Owner’s Manual; p. 79, p. 128).
Note that turning off this setting will stop the sounds from being output when the application is not recording or if its settings
are not correctly made.
■
When Using Mic Input or AUX Input
Setting the mic input gain, the AUX input level, or parameters related to effect volume settings excessively high may result in
unwanted oscillation. In such instances, lower the mic gain or volume level settings to suitable values.
MIDI OUT
MIDI IN
CONTROL OUT
CONTROL IN
GS-10 OUT
GS-10 IN
CONTROL
MULTI EFFECTS
A/D D/A
USB
INPUT
SELECT
MIDI
SELECT
Computer
EXP/CTL 1, 2
GUITAR/
BASS
MIC
INPUT
AUX
INPUT
Foot Switch
Expression Pedal
Guitar/Bass
Mic
CD/MD
Sound
Module
Sequencer
Mixer etc.
Speaker
MIDI OUT
MIDI IN
PHONES
OUTPUT
GUITAR
AMP OUT
Headphones
Guitar Amp
Recorder
etc.
DIGITAL
OUT
Audio signal
Control or MIDI signal
3
Read This First
About the GS-10 Software
■
Installing and Setting up the GS-10 Software
Follow the steps below to install and set up the software.
1.
Install the GS-10 drivers.
Be sure to read “Installing & Setup the USB Driver” in the GS-10 Owner’s Manual (p. 91).
When Using Mac OS 8/9
Either OMS or FreeMIDI must be installed prior to installation of the drivers.
2.
Install and set up GS-10 Editor and Librarian.
Please read the Readme file in the Editor folder on the GS-10 Software CD-ROM.
3.
Follow the steps below to start the Installer (setup program).
After starting the Installer, follow the instructions in the dialog boxes to install and set up the software.
Windows users
3-1.
Insert the CD-ROM into the CD-ROM drive of your computer.
3-2.
Click the Windows start button. From the menu that appears, select “Run...”.
Open the “Run...” dialog box.
3-3.
In the dialog box that appears, input the following into the “Open” field, and click [OK].
D:\EDITOR\SETUP.EXE
The Installer starts.
* The drive name may be different for your system. Specify the drive name of your CD-ROM drive.
Mac OS users
3-1.
Insert the CD-ROM into the CD-ROM drive of your computer.
3-2.
Double-click the “GS-10 Editor Installer” icon (found in the GS-10 Editor Installer E of the CD-ROM) to start up the
installer.
The Installer starts.
■
Upgrading
Upgraded versions of the GS-10 drivers or of GS-10 Editor or Librarian may be released to add features or to enhance
functioning when changes are made to the operating system. For the latest information and downloads, check the following
web page.
http://www.roland.co.jp/
About Cakewalk Music Creator
Please note the following points in regard to the Music Creator software included with the GS-10.
●
With digital audio, only 16-bit is supported. The GS-10’s 24-bit data is converted to 16-bit.
●
MIDI Clock is not transmitted. In addition, you cannot synchronize the GS-10 to the performance tempo.
●
The remote control settings (GS-10 Owner’s Manual; p. 75) cannot be used.
4
Read This First
GS-10 Software System Requirements
* Although BOSS has tested numerous configurations, and has determined that on average, a computer system similar to that described
above will permit normal operation of the GS-10, BOSS cannot guarantee that a given computer can be used satisfactorily with the GS-10
based solely on the fact that it meets the above requirements. This is because there are too many other variables that may influence the
processing environment, including differences in motherboard design and the particular combination of other devices involved.
■
Windows
Operating System:
Microsoft® Windows® XP Professional / XP Home /
2000 Professional / Me / 98SE / 98
Computer:
Windows® -compatible personal computer equipped
with a USB port
CPU/Clock:
Pentium®, Celeron®, Intel-compatible Processor /
600 MHz or Higher
* Not compatible with the Crusoe CPU from Transmeta.
USB Chipset:
Intel’s USB chipset is recommended
* VIA USB chipsets - The CPU must be 1 GHz or higher.
Memory (RAM):
128 MB or more
Hard disk:
400 MB or more of free space
Display resolution/Colors:
800 x 600 pixels or higher/65,535 colors (High Color 16
bit) or more
■
Macintosh
Operating System:
MacOS 8.6 and 9.x
MacOS X
* MacOS 9.0.4 or later is required when using
SoundManager compatible applications.
Computer:
Apple USB Ready Macintosh
CPU/Clock:
PowerPC G3 / 400 MHz or higher
Memory (RAM):
256 MB or more
Hard disk:
200 MB or more of free space
Display resolution/Colors:
800 x 600 pixels or higher/65,535 colors (High Color 16
bit) or more
* Requires OMS 2.3.5 or later, Or requires FreeMIDI 1.35 or
later.
Copyright © 2003 BOSS CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION.
204
* Microsoft and Windows are registered trademarks of Microsoft Corporation.
206j
* Windows® is known officially as: “Microsoft® Windows® operating system.”
207
* Apple and Macintosh are registered trademark of Apple Computer, Inc.
209
* MacOS is a trademark of Apple Computer, Inc.
220
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
231
* OMS is a registered trademark of Opcode Systems, Inc.
232
* FreeMIDI is a trademark of Mark of the Unicorn, Inc.
03456512 ’04-2-3N
Tabla de contenidos
Otros manuales de Equipo de grabación de Roland
Roland
Roland SBX-1000 Manual de usuario
Roland
Roland Studio-Capture Amplifier Manual de usuario
Roland
Roland RSS AR-3000R Manual de usuario
Roland
Roland GK-2A Manual de usuario
Roland
Roland Compu Rhythm CR-68 Manual de usuario
Roland
Roland TR-08 Manual de usuario
Roland
Roland SP-404SX Manual de usuario
Roland
Roland RA-90 Manual de usuario
Roland
Roland MKS-50 Manual de usuario
Roland
Roland Realtime Arranger RA30 Manual de usuario
Roland
Roland VR-50HD MK II Manual de usuario
Roland
Roland CD-2e Manual de usuario
Roland
Roland CD-2i Manual de usuario
Roland
Roland RE-501 Manual de usuario
Roland
Roland EXR-5S Manual de usuario
Roland
Roland MC-50 mkII Manual de usuario
Roland
Roland SVC-350 Manual de usuario
Roland
Roland VS-2000 Manual de usuario
Roland
Roland P-10 Manual de usuario
Roland
Roland AX-7 Manual de usuario
Manuales populares de Equipo de grabación de otras marcas
Strymon
Strymon NIGHTSKY Manual de usuario
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario
Tews Technologies
Tews Technologies TPMC465 Manual de usuario
Honeywell
Honeywell Excel 50 Manual de usuario
SeaLevel
SeaLevel COMM+8.LPCI Manual de usuario
Arturia
Arturia AUDIOFUSE STUDIO Manual de usuario
