Roland VS-700C Manual de usuario

VS-700C Console System Program Version 1.31

This system program updates your VS-700C Console to the latest version 1.31.

Checking the version

Before proceeding to the download, follow the instructions below to check the version.

1. Turn off the power of the VS-700C.

2. Turn on the switch "8" (move it upward) at SETTING on the rear panel to enter the update mode.

3. Turn on the power again.

4. Check the versions of VS-700C shown on the LCD display.

*No update required if the version was 1.31 or later.

5. Turn off the power then turn off the switch "8" (move it downward) on the rear panel.

Update history

Ver.1.31

Fixed the phenomenon that touch sense of faders might reduce sensitivity on Ver.1.30.

Ver.1.30

*VS-700C driver Ver.2.0.0 or later is required for Windows.

*VS-700C driver Ver.1.0.0 or later is required for Mac OS X.

Lower latency available. Super low latency and high stability has brought by newly introduced "VS

STREAMING" technology.

Things to prepare

Following items will be required to update the VS-700C to the latest version.

VS-700C

Windows or Mac with the system requirements, VS-700C driver installed.

A USB cable

Caution when performing the update ( IMPORTANT !! )

Never power-off your VS-700C while the update is in progress!

If a power failure or similar accident occurs during the update process, the VS-700C won’t be able to

start up in normal operating mode. This will require servicing, so you will need to contact Roland service

center near you if this occurs.

Downloading and expanding the archive

Download the "vs700c_sysw_v131.zip" for Windows or "vs700c_sysm_v131.zip" for Mac to the desktop or

any location. Downloaded file is an archive file in zip format. After expanding the archive, the folder

"vs700c_sys_v131" will be available, which contains system update files "p00001.mid", "p00002.mid" and

"UpdSMF" simple SMF player application.

How to install

Install the expanded files to the VS-700C with instructions below.

* Be sure that VS-700C driver is installed to Windows PC or Mac beforehand and that it has been properly

configured as a stand-alone device (without the VS-700R connected)

* VS-700C driver Ver.2.0.0 or later is required for Windows.

* VS-700C driver Ver.1.0.0 or later is required for Mac OS X.

1. Download the VS700 update file, then extract the contents of the package by right-clicking on it and

choosing "Extract All". On Mac OSX extract by double-clicking. Note: be sure to unzip it to a location on

your computer that you can find later

2. Locate and extract the contents of the folder for the firmware version you wish to install.

3. Be sure the VS-700C is turned off.

4. Remove all USB cables from PC/Mac except for keyboard and mouse.

5. Turn on the switch "8" (move upward) of SETTING on the rear panel to enter the update mode.

6. Turn on the power of the VS-700C.

7. Connect the VS-700C to the PC/Mac with USB cable.

8. Double click on the UpdSMF(.EXE) to launch on a Windows PC, UpdSMF on a Mac.

9. Select [CONSOLE (VS-700)] as "MIDI Out Device", [CONSOLE] on a Mac.

* If you can’t find [CONSOLE (VS-700)]( [CONSOLE] on a Mac), please confirm that VS-700C driver is

installed correctly on your computer.

10. Locate the folder including the update files "p00001.mid" and "p00002.mid" to "SMF Path" or "SMF

Folder" on a Mac.

11. Click on the "Scan SMF" (not required on a Mac) then confirm that update files are on the list.

12. Press [OK/ENTER] button which is blinking at the right side of VS-700C top panel. Message "Erase" will

be available on the LCD display.

13. Press [OK/ENTER] button again. Message "Sure?" will be shown on the LCD display.

14. Press [OK/ENTER] button once more. LCD display turns to "0%".

15. Click on the "Send" on the UpdSMF. Data transfer begins.

16. Message "End" will be shown on the LCD display when the update completes successfully.

*About one minute to complete the update.

*Never turn off the power during the update process.

17. Click on the [OK] in "Send SMF / Complete" dialog window.

18. Click on the [Exit] or [QUIT] on a Mac to quit the application.

19. Turn off the power of the VS-700C then after a while turn it on again.

20. Confirm that the version is now V1.31.

21. Turn off the power of the VS-700C then turn off the switch "8" (move downward) on the rear panel.

Tabla de contenidos

Otros manuales de Mezclador de música de Roland

Roland

Roland M-48 Manual de usuario

Roland

Roland M-5000 Manual de usuario

Roland

Roland Groovebox MC-505 Manual de operación y mantenimiento

Roland

Roland M-160 II Manual de usuario

Roland

Roland Groovebox D2 Manual de usuario

Roland

Roland MC-808 Manual de usuario

Roland

Roland V-Mixer VM-C7100 Manual de usuario

Roland

Roland DJ-2000 Manual de usuario

Roland

Roland SYSTEM-500 531 Manual de usuario

Roland

Roland V-Mixer VM-7200 Manual de usuario

Roland

Roland Groovebox MC-505 Manual de lista de piezas

Roland

Roland M-480 Manual de usuario

Roland

Roland A-6 Manual de operación y mantenimiento

Roland

Roland M-160II Manual de usuario

Roland

Roland VR-400UHD Manual de uso y mantenimiento

Roland

Roland MC-303 Groovebox Manual de operación y mantenimiento

Roland

Roland SoundCanvas SC-8820 Manual de usuario

Roland

Roland PA-200 Manual de usuario

Roland

Roland M-5000 Manual de usuario

Roland

Roland Edirol M-10MX Manual de usuario

Roland

Roland MC-808 Manual de usuario

Roland

Roland M-160 Manual de usuario

Roland

Roland Edirol M-16DX Manual de usuario

Roland

Roland V-Mixer M-400 Manual de usuario

Manuales populares de Mezclador de música de otras marcas

Neve

Neve 8816 Manual de usuario

Mackie

Mackie Onyx Analogue Mixer Manual de usuario

Behringer

Behringer EUROPOWER PMP518M Manual de usuario

Peavey

Peavey S-32 Sanctuary Series Manual de usuario

Rane

Rane MP 4 Manual de usuario

True

True T9 Touchscreen Console Manual de usuario

Studiomaster

Studiomaster Air Pro 24 Manual de usuario

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manual de usuario

Yamaha

Yamaha MR1642 Manual de usuario

Ecler

Ecler MAC40v Manual de usuario

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manual de usuario

Veeder-Root

Veeder-Root TLS-350 Series Manual de usuario

Alto

Alto APM80.QUAD Manual de usuario

Omnitronic

Omnitronic PM-211 Manual de usuario

SoundCraft

SoundCraft B400 Manual de usuario

CARVIN

CARVIN RX 1200 Manual de usuario

Euphonix

Euphonix MC Mix Manual de usuario

Mackie

Mackie Ultra-34 Manual de usuario