Rohde & Schwarz NGA100 Manual de usuario

R&S®NGA100

Power Supply Series

Getting Started

5601890202

Version 03

(Æ1ç22)

Sie haben Fragen oder wünschen eine Beratung? Angebotsanfrage unter 07121 / 51 50 50 oder über [email protected]

Distributed by:

This manual describes the following R&S®NGA100 models with firmware version

1.00 and higher:

●R&S®NGA101 One-Channel 35V/6A Power Supply 40 W (5601.8002.02)

●R&S®NGA102 Two-Channel 35V/6A Power Supply 80 W (5601.8002.04)

●R&S®NGA141 One-Channel 100V/2A Power Supply 40 W (5601.8002.03)

●R&S®NGA142 Two-Channel 100V/2A Power Supply 80 W (5601.8002.05)

Mühldorfstr. 15, 81671 München, Germany

Phone: +49 89 41 29 - 0

Email: [email protected]

Internet: www.rohde-schwarz.com

Subject to change – data without tolerance limits is not binding.

R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

5601.8902.02 | Version 03 | R&S®NGA100

Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g.

R&S®NGA is indicated as R&S NGA100.

1171.1307.52 - 05

Safety Instructions

Instrucciones de seguridad

Sicherheitshinweise

Consignes de sécurité

Risk of injury and instrument damage

The instrument must be used in an appropriate manner to prevent electric shock, fire,

personal injury or instrument damage.

●Do not open the instrument casing.

●Read and observe the "Basic Safety Instructions" delivered as printed brochure with

the instrument.

●Read and observe the safety instructions in the following sections.

Note that the data sheet may specify additional operating conditions.

●Keep the "Basic Safety Instructions" and the product documentation in a safe place

and pass them on to the subsequent users.

Riesgo de lesiones y daños en el instrumento

El instrumento se debe usar de manera adecuada para prevenir descargas eléctricas,

incendios, lesiones o daños materiales.

●No abrir la carcasa del instrumento.

●Lea y cumpla las "Instrucciones de seguridad elementales" suministradas con el

instrumento como folleto impreso.

●Lea y cumpla las instrucciones de seguridad incluidas en las siguientes secciones.

Se debe tener en cuenta que las especificaciones técnicas pueden contener

condiciones adicionales para su uso.

●Guarde bien las instrucciones de seguridad elementales, así como la

documentación del producto, y entréguelas a usuarios posteriores.

1171.1307.52 - 05

Gefahr von Verletzungen und Schäden am Gerät

Betreiben Sie das Gerät immer ordnungsgemäß, um elektrischen Schlag, Brand,

Verletzungen von Personen oder Geräteschäden zu verhindern.

●Öffnen Sie das Gerätegehäuse nicht.

●Lesen und beachten Sie die "Grundlegenden Sicherheitshinweise", die als

gedruckte Broschüre dem Gerät beiliegen.

●Lesen und beachten Sie die Sicherheitshinweise in den folgenden Abschnitten;

möglicherweise enthält das Datenblatt weitere Hinweise zu speziellen

Betriebsbedingungen.

●Bewahren Sie die "Grundlegenden Sicherheitshinweise" und die

Produktdokumentation gut auf und geben Sie diese an weitere Benutzer des

Produkts weiter.

Risque de blessures et d'endommagement de l'appareil

L'appareil doit être utilisé conformément aux prescriptions afin d'éviter les

électrocutions, incendies, dommages corporels et matériels.

●N'ouvrez pas le boîtier de l'appareil.

●Lisez et respectez les "consignes de sécurité fondamentales" fournies avec

l’appareil sous forme de brochure imprimée.

●Lisez et respectez les instructions de sécurité dans les sections suivantes. Il ne faut

pas oublier que la fiche technique peut indiquer des conditions d’exploitation

supplémentaires.

●Gardez les consignes de sécurité fondamentales et la documentation produit dans

un lieu sûr et transmettez ces documents aux autres utilisateurs.

이 기기는 업무용(A급) 전자파

적합기기로서 판매자 또는

사용자는 이 점을 주의하시기

바라며, 가정외의 지역에서

사용하는 것을 목적으로 합니다.

1171.0200.78-01

Contents

R&S®NGA100

3Getting Started 5601.8902.02 ─ 03

Contents

1 Documentation Overview......................................................5

1.1 Manuals..................................................................................................5

1.2 Data Sheet............................................................................................. 5

1.3 Calibration Certificate...........................................................................6

1.4 Release Notes, Open Source Acknowledgment................................ 6

2 Welcome to R&S NGA100..................................................... 7

3 Putting into Operation...........................................................8

3.1 Safety..................................................................................................... 9

3.2 Intended Operation............................................................................. 11

3.3 Unpacking and Checking the Instrument......................................... 12

3.4 Setting Up the Instrument.................................................................. 14

4 Instrument Tour................................................................... 15

4.1 Overview of Controls..........................................................................15

4.2 Switching On the Instrument............................................................. 20

5 Trying Out the Instrument...................................................22

5.1 Selecting the Channels...................................................................... 22

5.2 Setting the Output Voltage and Current Limit.................................. 22

5.3 Activating the Channels Output........................................................ 23

5.4 Storing/Recalling of Instrument Settings......................................... 23

6 Maintenance and Support...................................................24

6.1 Maintenance........................................................................................ 24

6.2 Contacting Customer Support...........................................................24

Index..................................................................................... 26

Contents

R&S®NGA100

4Getting Started 5601.8902.02 ─ 03

Documentation Overview

R&S®NGA100

5Getting Started 5601.8902.02 ─ 03

1 Documentation Overview

This section provides an overview of the R&S NGA100 user documentation.

1.1 Manuals

You find the documents on the R&S NGA100 product page at:

www.rohde-schwarz.com/manual/nga100

Getting Started

Introduces the R&S NGA100 power supply series and describes how to set up

and start working with the instrument. The printed document is delivered with the

instrument.

User manual

Contains the description of all instrument modes and functions. It also provides

an introduction to remote control, a complete description of the remote control

commands with programming examples, and information on maintenance and

instrument interfaces. Includes the contents of the getting started manual.

The online version of the user manual provides the complete contents for immedi-

ate display on the internet.

Basic safety instructions

Contains safety instructions, operating conditions and further important informa-

tion. The printed document is delivered with the instrument.

Instrument security procedures manual

Deals with security issues when working with the R&S NGA100 in secure areas.

1.2 Data Sheet

The datasheet contains the technical specifications of the R&S NGA100 power

supply series. It also lists all options with their order numbers and accessories.

Data Sheet

Documentation Overview

R&S®NGA100

6Getting Started 5601.8902.02 ─ 03

See www.rohde-schwarz.com/brochure-datasheet/nga100

1.3 Calibration Certificate

The document is available on https://gloris.rohde-schwarz.com/calcert. You need

the device ID of your instrument, which you can find on a label on the rear panel.

1.4 Release Notes, Open Source Acknowledgment

The release notes list new features, improvements and known issues of the cur-

rent firmware version, and describe the firmware installation. The open source

acknowledgment document provides verbatim license texts of the used open

source software. It can also be downloaded from the instrument.

See www.rohde-schwarz.com/firmware/nga100.

Release Notes, Open Source Acknowledgment

Welcome to R&S NGA100

R&S®NGA100

7Getting Started 5601.8902.02 ─ 03

2 Welcome to R&S NGA100

The one-channel or two-channel power supply series are based on a classical

transformer concept with high efficiency electronic pre-regulators and secondary

linear regulators. This concept allows the instrument to achieve the high output

power within a minimum space, high efficiency and lowest residual ripple.

The R&S NGA100 power supply series feature galvanically isolated, floating over-

load and short-circuit proof outputs with adjustable power ratings. The outputs

can be connected in series or in parallel, thus making high currents and voltages

available.

Multi-purpose protection functions are available for each channel which you can

set separately, such as overcurrent protection (FUSE), overvoltage protection

(OVP), overpower protection (OPP) and overtemperature protection (OTP). If

such a limit is reached, the affected output channel is automatically turned off and

an indicator message (FUSE, OVP, OPP or OTP) is displayed. The overcurrent

protection can be linked to other channel (FuseLink function). In this case, all

linked channels are turned off when the set channel reaches its limit.

The EasyArb function allows channel 1 (Ch 1) to have freely definable voltage

and current sequences with a timeframe as short as 10 ms. It allows you to vary

the voltage or current limit during a test sequence, for example to simulate differ-

ent charging conditions of a battery. With EasyRamp function, the R&S NGA100

provides the operating condition to simulate the continuous rise of the supply volt-

age within a defined timeframe of 10 ms to 10 s.

Four data lines of the digital I/O interface are mutually independent and can be

used as trigger input or trigger output separately. Various trigger conditions (e.g.

fuse tripped, voltage, current, indicator messages) can be used to turn off, on or

invert the output state when the trigger condition is met.

All R&S NGA100 power supply series are equipped with a color LCD display (320

x 240 pixels resolution). The R&S NGA100 comes with a USB interface, LAN and

optional wireless LAN (WLAN) interface.

For models with WLAN, network connection can also be established wirelessly.

This user manual contains a description of the functionalities that the instrument

provides. The latest version is available for download at the product homepage

(http://www.rohde-schwarz.com/product/nga100).

Otros manuales para NGA100

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Fuente de alimentación de Rohde & Schwarz

Rohde & Schwarz

Rohde & Schwarz HMP Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz HMC8043-G Manual de usuario

Rohde & Schwarz

Rohde & Schwarz NGP800 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz NGP800 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz HMP Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz R&S FSV-B30 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz NGP800 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz R&S NGA100 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz NGMO1 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz HMP2020 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz R&S NGP800 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz HMC8041 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz NGL200 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz R&S NGP800 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz TS-PSU12 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz HM7042-5 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz NGP800 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz HM8143 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz R&S NGE100B Manual de usuario

Rohde & Schwarz

Rohde & Schwarz R&S NGL200 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz R&S NGM200 Series Manual de usuario

Rohde & Schwarz

Rohde & Schwarz NGA101 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz HMC804 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz NGP800 Series Manual de usuario

Manuales populares de Fuente de alimentación de otras marcas

Monacor

Monacor PS-12CCD Manual de usuario

VOLTIMA

VOLTIMA MagicBox 15 Manual de usuario

Agilent Technologies

Agilent Technologies 6032A Manual de usuario

Miller

Miller Auto Deltaweld 452 Manual de usuario

BCP

BCP PUOUBK Hoja de instrucciones

HC 2210 Manual de usuario

Puls

Puls CT5.241 Manual de usuario

OCZ

OCZ ZX1250W Manual de usuario

iseg

iseg ECH 238 Manual de usuario

Power

Power XXL A Series Manual de usuario

Agilent Technologies

Agilent Technologies 6631B Manual de usuario

Renogy

Renogy PHOENIX 300 Manual de usuario

HP 6200B Manual de servicio

Epson

Epson Stylus Scan 2500 Manual de funcionamiento

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manual de usuario

Puls

Puls MiniLine ML50.100 Manual de usuario

Puls

Puls AS-Interface SLA4.100 Manual de usuario

Kenwood

Kenwood PS-60 Manual de usuario