RODCRAFT WP50P Manual de usuario

WP30P / WP50P / WP75P / WP100P- Instructions for lifting and lowering the table

www.rodcraft.com

SAFETY INSTRUCTIONS

• Never exceed the rated capacity of the press.

• Keep unauthorised persons, particularly children, away from the work area.

• Do not introduce hands or any other part of the body in the work area.

• Always use ocular and facial protection.

• Never wear baggy clothes, ties, watches, rings, chains, etc. when using the

press.

• Long hair should be tied up.

• Prior to use, make sure the press is securely anchored.

• Use appropriate guarding to contain any pieces that may break or fly apart

when applying force.

• Use only press accessories having a capacity rating equal to or greater than

the capacity of the press.

• Verify lift cables are slack before pressing on the bolster.

• Avoid off-center loads.

• The V-blocks must be used in pair, not by piece!

• Only one person at a time should operate the press.

• The operator must wear protective cloth, gloves, safety helmet, shoes and

ear protector during operating.

• To avoid accidents, always be aware of any on-going work on the machine.

Also, always stay focused on the job to be done.

WARNING

Lower lock pins

Table

Upper lock pins

Winch

Cable

Safety

8956001351 Rev.02 - 02/2017

WP30P / WP50P / WP75P / WP100P - Instructions for lifting and lowering the table

www.rodcraft.com Page 2/2

Lifting the table

•

WARNING

While lifting the table, the 2

lower lock pins must remain in position.

1. Remove the upper lock pins.

2. Lift the table using the winch and adjust the height of the

table to allow the positionning of the lock pins in the holes.

3. Insert the upper lock pins with the safety pins.

4. Remove and Insert the lower lock pins to a new position.

Insert the safety pins.

5. Always operate the winch in order to release tension

of the cables.

Caution

When using the press,

The cables must always be loose. The cables

must not carry any load.

Lowering the table

1. Remove and insert the 2 lower lock pins to a new

postion.

WARNING

While lowering the table, the 2

lower lock pins must remain in lock position.

2. Apply tension on the table using the winch and remove

the upper lock pins.

3. Lower the table using the winch and adjust the height

of the table to allow the positionning of the lock pins.

4. Insert the upper lock pins with the safety pins.

5. Always operate the winch in order to release tension

of the cables.

Caution

When using the press,

The cables must always be loose. The cables

must not carry any load.

INSTRUCTIONS FOR MOVING THE TABLE

Caution

Never lower or lift the table with a load, the table must be free of load.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Herramientas eléctricas de RODCRAFT

RODCRAFT

RODCRAFT RC3060 Manual de usuario

RODCRAFT

RODCRAFT WP75P Manual de usuario

RODCRAFT

RODCRAFT RC6100 Manual de usuario

RODCRAFT

RODCRAFT RC3010 Manual de usuario

RODCRAFT

RODCRAFT RC3001 Manual de usuario

RODCRAFT

RODCRAFT RC3000 Manual de usuario

RODCRAFT

RODCRAFT RC7088 Manual de usuario

RODCRAFT

RODCRAFT RC8115 Manual de usuario

RODCRAFT

RODCRAFT RC3201 Manual de usuario

RODCRAFT

RODCRAFT RC3005 Manual de usuario

RODCRAFT

RODCRAFT RC3000 Manual de usuario

RODCRAFT

RODCRAFT RC2040 Manual de usuario

RODCRAFT

RODCRAFT RC8130 Manual de usuario

RODCRAFT

RODCRAFT WP15 Manual de usuario

RODCRAFT

RODCRAFT RC6605RE Manual de usuario

RODCRAFT

RODCRAFT RC8112 Manual de usuario

RODCRAFT

RODCRAFT RC6300 Manual de usuario

RODCRAFT

RODCRAFT Premium RC3062 Manual de usuario

RODCRAFT

RODCRAFT HRS04 Manual de usuario

RODCRAFT

RODCRAFT RC2200/10 Manual de usuario

RODCRAFT

RODCRAFT PREMIUM RC3605 Manual de usuario

RODCRAFT

RODCRAFT RC6700 Manual de usuario

RODCRAFT

RODCRAFT RC3068 Manual de usuario

RODCRAFT

RODCRAFT RC8113 Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual