Rocstor SolidRack R106SH4G Manual de usuario
®
SolidRack Wall Mount Rack Enclosure
User Manual
Y10E001-B1
Y10E002-B1
Y10E003-B1
6U Model: R106SH4G
9U Model: R109SH4G
12U Model: R112SH4G
Table of Contents
Rocstor Legal Disclaimer
Important Safety Instructions
Important Safety Information
Introduction
Feature Identication
Hardware and Accessories
Cage Nut installation
Enclosure Installation
Ground The Cabinet
Enclosure Conguration
Wall Mounting the Enclosure
Five-Year Factory Warranty
1
2
3
4
4
5
5
6, 7
8
9, 10, 11
12
13
Page
The information presented in this manual is not warranted by Rocstor to be totally authoritative, error free,
or complete. This publication is not meant to be a substitute for a detailed operational and a site-specic
development plan for the use of the product. Therefore, Rocstor assumes no liability for damages, violations
of codes, improper installation, system failures, or any other problems that could arise based on the use of
this Manual.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE LIMITED IN TIME TO THE DURATION OF THE
WARRANTY AS STATED HEREIN AND IS EXCLUSIVE IN LIEU OF ALL OTHER WARRANTIES, LEGAL THEORIES,
REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. IN NO EVENT SHALL
ROCSTOR, OR ANY PARENT, AFFILIATE OR SUBSIDIARY COMPANY OF ROCSTOR OR THEIR RESPECTIVE
OFFICERS, DIRECTORS, OR EMPLOYEES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE,
SPECIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS,
CONTRACTS, REVENUE, LOST PROFITS, DATA, INFORMATION, GOODWILL OR BUSINESS INTERRUPTION
RESULTING FROM OR ARISING OUT OF THE USE OF THE PRODUCT OR FAILURE TO FOLLOW INSTRUCTIONS
IN THE MANUAL.
FURTHERMORE, ROCSTOR SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING,
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF
ROCSTOR CANNOT LAWFULLY DISCLAIM SUCH IMPLIED WARRANTIES, THOSE IMPLIED WARRANTIES WILL BE
LIMITED IN DURATION TO THE DURATION SET FORTH ABOVE.
FURTHER STILL, ROCSTOR RESERVES THE RIGHT TO MAKE CHANGES OR UPDATES WITH RESPECT TO THE
CONTENT OF THE PUBLICATION OR THE FORMAT THEREOF AT ANY TIME AFTER PURCHASE WITHOUT
NOTICE.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages
or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or
exclusions may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary by state or province.
Copyright, intellectual, and all other proprietary rights in the content of the manual (including but not
limited to software, audio, video, text, and photographs) rests with Rocstor or its licensor. All rights in the
content are the property of Rocstor and are not granted, licensed, assigned or otherwise passed to the
purchaser’ of the product or to persons having access to the information in the manual
Rocstor Legal Disclaimer
Page 1
Important Safety Instructions
Please follow the essential and important instructions in this manual. The information provides you
useful instructions for installation and customization of the rack or equipment.
• Wear appropriate personal protective equipment (PPE) when installing or conguring the cabinet.
• Keep the enclosure the away from moisture, high and low temperature extremes, ammable liquids and
gases, conductive contaminants, dust and direct sunlight. And in a controlled indoor environment.
• The enclosure needs to be installed or be placed in order to have an adequate space at the front and rear of
the enclosure for proper ventilation.
• It is important not to block, cover or insert objects into the enclosure that will block ventilation openings in
all sides including front and top of the enclosure.
• The content of this packaging is easily tipped. Please be extra careful and use extreme caution
• When moving or unpacking this cabinet. Two people are preferred and are required to move and
• unpack the cabinet.
• Use a mechanical device such as a forklift or pallet jack to move the enclosure.
• No object should be placed on the enclosure, such as containers of liquid.
• Do not attempt to stack the enclosures due to excessive weight.
• This enclosure should be installed in a structurally sound area that can handle the load and the weight of
the cabinet.
• If you place the cabinet on a level oor, make sure the oor is able to bear the weight of the enclosure, all
equipment that will be installed in the enclosure.
• For permanent wall mount installation, make sure to securely fasten the enclosure to the building structure.
WARNING
Page 2
Important Safety Information
Please review and read the instructions very carefully in order to understand the specication of the equipment. This is
essential information before installing, operating, service or maintaining your equipment. These messages or alerts may appear
throughout this publication and manual for your purchased equipment. The messages are designed to warn you of possible
hazards or to bring to your attention the information that would assist and claries steps and procedures.
DANGER
WARNING
CAUTION
CAUTION
NOTICE
DANGER This symbol represents an imminently hazardous situation which, if not avoided,
will result in death or serious injury. Please follow instructions carefully.
WARNING This symbol represents a potentially hazardous situation which, if not avoided, can
result in death or serious injury. Please follow instructions carefully.
CAUTION This symbol indicates a potentially hazardous situation which, if not avoided, can
result in minor or moderate injury.
CAUTION, This symbol is used without the safety alert symbol, indicates a potentially
hazardous situation which, if not avoided, can result in equipment damage. Please follow
instructions carefully. Please follow instructions carefully.
NOTICE This symbol provides informations and practices not related to physical injury
including certain environmental hazards, potential damage or loss of data. Please follow
instructions carefully.
This is a safety alert symbol. It is used to alert you to potential personal
injury hazards. Please follow the instructions very carefully and obey all
safety messages that follow this symbol to avoid possible injury or death.
This symbol and label provides Danger or Warning safety which indicates
an electrical hazard exists. If instructions are not fully followed, it may
result in personal injury.
Page 3
Introduction
Rocstor SolidRack assembled wall-mount rack enclosure is a non-swinging cabinet which is ideal for retail, educational
facilities, and healthcare. It accommodates all standard 19-inch rack-mount equipment, and it ships fully assembled for easy
deployment and installation. This rack cabinet is wall mountable which is ideal for areas with limited oor space. It is designed
specically for servers and network switches, and patch panels. This rack enclosure can also be placed on the oor with an
optional rolling caster kit for easy maneuvering of the enclosure. The cabinet’s door is reversible. Optional 120V dual fan that
can be mounted on top (sold separately). Rocstor SolidRack cabinets are built strong and reliable with a 200lb weight capacity,
19” rack width, ships fully assembled, ventilated, and provides fan and other accessory integration options. This SolidRack
enclosure is backed by Rocstor’s 5 year warranty and lifetime technical support.
Feature Identication
1
2
34
5
6
7
8
9
6. Top cover- 1pcs
7. Vertical bracket - 4pcs
8. Horizontal bracket-4pcs
9. Frame-1pcs
1. Mounting bracket - 1pcs
2.Rear panel - 1pcs
3.Side panels - 2pcs
4. Front door - 1pcs
5. Bottom panel - 1pcs
Page 4
Hardware and Accessories
To ensure proper and secure installation, cage nuts need to be installed horizontally
as shown below. Installing cage nuts in the incorrect orientation can cause injury or
equipment damage.
Cage Nut Installation
Note: You may wish to use a cage nut tool (user-supplied) to aid cage nut installation and removal.
QTY
4
12
12
2
2
Expansion Bolt
M6 Screw
Plastic washer
12
M6 cage nut
Page 5
Key for front door
Key for side panels
Enclosure Installation
Tools Requirement & Preparation for Installation
Make sure you inspect the area that this cabinet will be installed. This enclosure should be installed in a
structurally sound area that can handle the load and the weight of the cabinet. If you place the cabinet on a
level oor, make sure the oor can bear the weight of the enclosure, all equipment that will be installed in
the enclosure. For permanent wall mount installation, make sure to securely fasten the enclosure to the
building structure.
The following tools are required for proper installation:
• Level (not included)
• Phillips-head screwdriver (not included)
• Appropriate tools for wall mounting (not included)
• Appropriate hardware for wall mounting (not included)
Page 6
CAUTION, This symbol is used without the safety alert symbol, indicates a potentially
hazardous situation which, if not avoided, can result in equipment damage. Please follow
instructions carefully. Please follow instructions carefully.
NOTICE This symbol provides informations and practices not related to physical injury
including certain environmental hazards, potential damage or loss of data. Please follow
instructions carefully.
CAUTION
NOTICE
Use at least two people to unpack the enclosure.
Customer Equipment Installation
• Review the equipment manufacturer's installation instructions.
• Locate the top and bottom U-space on the vertical mounting rails. Every third hole on the mounting rails is
numbered to indicate the middle of a U-space.
• Install the cage nuts on the interior of the vertical mounting rail; then install the equipment.
(To remove a cage nut, squeeze the sides to release it from the square hole.)
Move the Cabinet
• Be extremely cautious when moving or unpacking this rack/cabinet.
• When moving or unpacking this cabinet. Two people are preferred and are required to move and unpack
the cabinet.
• Make sure the leveling feet are up when moving or pushing the cabinet. DO NOT push the cabinet from its
sides.
TIP/ HEAVY EQUIPMENT HAZARD
WARNING
Not following these instructions carefully, it can result in death, serious injury, or equipment
damages.
Enclosure Installation
Page 7
Ground the Cabinet
HAZARD OF ELECTRIC SHOCK
Connection of the cabinet to building Common Bonding Network (CBN) is required.
Failure to follow these instructions will result in death or serious injury.
DANGER
Ground Connection
SolidRack use the most reliable and quality products. All doors and parts of the enclosure are grounded to
the frame of the enclosure. To connect the enclosure to the facility's ground, use the grounding nut in the
enclosure. The grounding point is marked in the enclosure with the ground symbol shown below.
Page 8
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Recinto de Rocstor
