Rockville RAM12BT V2 Manual de usuario

RAM12BT V2/RAM15BT V2

WHO READS MANUALS?

OWNER’S MANUAL

Instead, go to vimeo.com/443443847 or scan the QR

code and watch a short video that shows you how to set

this item up and how to use it.

If you prefer written instructions, please read ahead!

With Rockville you get many options.

Missing items? If you ordered a bundle that includes more than one product and you

are missing part of your bundle, then it just means your order shipped from two different

warehouses. You will receive the remaining items very soon. If you have any concerns

or inquiries, feel free to call our customer support center at 1-646-758-0144, Monday

through Thursday, 9am to 10pm EST, and Fridays, 9am to 3pm EST.

INCLUDES

Thank you for purchasing this Rockville RAM-BT v2 series pro audio speaker with blue-

tooth and TWS wireless stereo linking. Please read this installation guide carefully for prop-

er use of your RAM-BT v2. Should you need assistance, please call our technical help line

at 1-646-758-0144, Monday through Thursday, 9am to 10pm EST, and Fridays, 9am to

3pm EST.

IMPORTANT SAFETY INSTRUCTIONS

• To reduce risk of electric shock, never open the unit. There are no user serviceable parts, refer

service to an authorized Rockville service center.

• Do not expose this unit to any kind of moisture.

• Please ensure that the unit is situated in a properly ventilated area.

• Make sure the unit is placed on a level and stable surface.

• Active/Powered DJ/PA Speaker With Built-in Bluetooth

• 2 Wireless Microphones

• Built-in Rechargeable Battery

• Power Cable

• Remote Control

Your RAM BT V2 unit is set up to produce the full spectrum of sound from its woofer and

tweeter horn combination. The lower frequencies seek out the oor of the room they are

playing and travel along the oor and walls. The tweeter horn is more directional. Hence

when setting up your system its more important to make sure that the tweeter horns are

not blocked by any furniture and are located / aimed at ear level to the listening audience.

Woofer aiming is not as critical as explained previously due to the nature of the woofer

sounds able to travel through various paths even when blocked.

It is therefore recommended that when setting up your system you set up your speakers

on speaker stands, such as the Rockville model RVES05 (not included) so that the

tweeter sounds will radiate above the listening crowd. This will guarantee optimum sound

dispersion and achieve clear vocal sound reproduction.

Setting Up Your RAM BT V2 Professional Sound System

The placement of your microphone is critical in avoiding feedback through your RAM BT

unit. Never set up your microphone in front of the speaker. Always set up your microphone

behind the speaker. When approaching the speaker to make any adjustments, we

recommend approaching the speaker from the rear and not walking directly towards the

front of the speaker.

Unlike a PA setup which face the crowd, stage monitors are set up to face the performer

on stage and to direct the sound towards them. This presents a particular problem as now

feed back may occur. To avoid stage monitor feedback the following precautions should

be taken.

How To Avoid Irritating Feedback

Stage Monitor Setup

1. Choose a microphone with high directivity, i.e. cardioid or hyper-cardioid polar

pattern.

2. Never point the microphone directly down in front of the speaker. Holding the micro

phone in normal position will allow you to be closer to the stage monitor with out feed

back.

3. See illustration below as to position of microphones when mounted in stand. Cardioid

polar pattern microphones should always be at a 90 degree angle to the axis of the

stage monitor. Hyper Cardioid polar pattern microphones should be positioned at an

acute angle to the sage monitor.

You may choose to add a feedback eliminating processor to your system for additional

exibility on stage.

Cardioid Polar Pattern Hyper Cardioid Polar Pattern

POWER

CLIP

LINE LEVEL

Setting Level Controls

Because mixers feature two volume controls (channel and master), when

connecting one via the XLR line in port, the procedure is slightly different. The

RAM-BTv2 Line Level should be set to 50%. Set the mixer master volume to 50%

and make the adjustments in step 3 on the mixer channel level control. If after

making these adjustments the signal still isn’t strong enough, you can additionally

boost the signal by turning up the Line Level control.

When adjusting the Mic Volume control, you must speak into the micophone and

adjust the level control as needed. This is because adjustments to the mic input

are a matter of mic volume in relation to the music volume and not necessarily a

clipping issue.

It is best practice to set your input level controls (gains) in this manner:

1. Unplug all inputs except for the one you wish to set the

gain for. In this instance, the Line In RCA inputs.

2. Set the line level input device volume (smart phone,

tablet, MP3 player, etc.) to 60%.

3. Slowly turn up the level on the selected

input (in this case, the Line Level).

As soon as the clip indicator LED goes on

or you hear any distortion – turn it down

one or two notches.

BLUETOOTH BT B

Connected!

3a 3b

POWER

The RAM-BT v2 features True Wireless Stereo (TWS) Bluetooth linking. This means you

can purchase 2 of these speakers and link them together to play in stereo wirelessly.

1. Make sure both RAM-BTv2 unit’s power switches are in the ON position and that they

are within 32 feet of each other.

2. Press the Mode button on both of the units to enter Bluetooth mode. The LCD screens

should show that the speakers are not connected via Bluetooth or to another speaker.

3. Press the SCAN/TWS button on one of the units for 3 seconds (3a). If pairing is suc-

cessful the unit's LCD screen will read "BLUETOOTH BT-A Connected" (3b). This is

the primary and all functions will be controlled by this unit.

4. The secondary unit's LCD screen will read "BLUETOOTH BT-B Connected".

5. Once the speakers are connected, go to your phone's Bluetooth interface and select

"ROCKVILLE" from the list of devices. If connection is successful, you will hear the

same audio from both unit's. You are now ready to enjoy true wireless stereo sound!

Wireless Speaker Linking

32 ft

ROCKVILLE

Once the units are in TWS mode, the primary (left) unit becomes

the master unit and will control all functions.

BLUETOOTH

Disconnected!

BLUETOOTH

Disconnected!

BLUETOOTH BT A

Connected!

Your RAM BT unit comes with two wireless microphones. To connect the microphones to

the unit follow these steps:

1. Make sure the RAM BT unit power switch is in ON position.

2. Keep both Mic A Volume and Mic B Volume and Channel B wireless Mic Volume

at Min position.

3. Press the VHF power on button (red indicator LED should be on).

4. Switch on one microphone. It should automatically connect to the corresponding

channel and the LED for that channel should light up.

5. Repeat steps 1 through 5 for the second microphone.

6. Use the Mic A / Mic B volume controls to adjust each microphone’s volume.

Wireless Microphone Set-Up

1. Make sure the Power switch is in the OFF position.

2. Plug your microphone into the XLR/¼˝ combo jack.

3. Switch on the RAM-BT v2 unit.

4. Refer to the "Setting Level Controls" section of this manual for instructions on how to

properly adjust the Mic Volume controls.

Always stand behind the Power Gig when making your microphone adjustments to avoid

feedback distortion.

Your RAM-BT v2 features ultra-low noise Mic input via an XLR port and ¼˝ TRS stereo jack.

APPLICATION USES

Microphone Presentations

You can use the Line In XLR input to connect a mixer or the RCA inputs to connect an

additional stereo signal source such as a smart phone, tablet, MP3 player, CD player, etc.

1. Make sure the Power switch is in the OFF position.

2. Connect the mixer to the XLR input or line level signal source to the RCA inputs

(never use both at once).

3. Switch on the RAM-BT v2 unit.

4. Refer to the "Setting Level Controls" section of this manual for instructions on how to

properly adjust the Line In level control (gains).

Line Input

In the ON position the TALK OVER function gives the microphone priority over all other

features so that the microphone’s volume level will be higher. When the TALK OVER

function is in the OFF position, the microphone can be used in conjunction with any other

feature (Bluetooth, MP3, SD, etc.) at the same sound level.

Talk over Feature

You can record the input from any mic or line input source to a USB or SD card.

1. Make sure there is a USB or SD card inserted and that your input source is ready.

2. Press the red record button to begin recording. The LCD display will read INITIAL.

Press the red record button to stop recording and save the audio les.

3. Saved les will be named REC0001.MP3, REC0002.MP3, REC0003.MP3, etc. Use the

Previous/Next buttons to nd the les on the USB disc or SD card.

Record Function

Line Out Balanced Connection.

POWERED

SPEAKER

AMPLIFIER

The XLR Line Out allows you to output the amplier signal to a powered subwoofer, another

powered speaker, or an amp, which will, in turn, power other speakers. Simply connect the

output device to the RAM-BT v2 using an XLR to XLR or XLR to ¼˝ TRS cable to share the

signal. We recommend you use high quality cables such as Rockville’s RCXFM20E-B XLR

to XLR cable or the RCXMB20-B XLR to ¼˝ TRS cable.

POWERED

SUBWOOFER

POWER

OFF

INITIAL 1. REC0001.MP3

2. REC0002.MP3

1 2 3

To connect your iPod, iPhone, MP3 player, Android phone or any other Bluetooth capable

device follow the steps listed below.

1. Make sure the RAM-BT v2 unit’s power switch is in the ON position.

2. Turn on the Bluetooth feature on your device.

3. Push the Mode button on your RAM-BT v2 unit until you are in Bluetooth mode. The

LCD screen will read “BLUETOOTH Disconnected”

4. Once in Bluetooth mode, the unit should show up on your device as “ROCKVILLE”.

Select it from your list of available devices.

5. If pairing is successful, the LCD screen will read “BLUETOOTH Connected”. You can

now begin to stream music.

BLUETOOTH

Disconnected!

Connected!

ROCKVILLE

Bluetooth Pairing

POWER

This unit includes a built-in 12 volt, 9 amp battery. This convenient features allows you to

use your RAM BT for up to 12 hours in any situation where outlets are not readily available.

No need to concern yourself with extension cords and the such. The unit comes with

battery status LED indicators to let you know the status of the battery and when to charge

the battery. The battery can run for up to 12 hours on a full charge. To charge the battery

simply plug it into an outlet. Battery takes approximately 6 hours to charge. The battery is

fully charged when the left LED is on and the right LED is off. While charging the left LED

is off and the right LED is on. When the battery is drained it is important that you immediately

turn off your unit to prevent damage to the battery.

As well as having a built-in battery, the RAM BT also has the ability to power up using an

external battery. Simply hook the unit up to any 12V car battery or 12V power source. We

recommend you use spade terminals to connect the power cables to the unit’s power and

ground inputs. Remember, RED is POSITIVE (+12V) and BLACK is NEGATIVE (-).

Built-in Battery

External Battery Power

+ -

STATUS LED1 LED2

1. NOT charging

2. Charging

3. Fully charged

4. Overvoltage

5. Pulse charging

OFF

Flashing slowly

Flashing quickly

Otros manuales para RAM12BT V2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Oradores de Rockville

Rockville

Rockville RPG12BT V2 Manual de usuario

Rockville

Rockville APM5 Manual de usuario

Rockville

Rockville Power Gig RPG122K Manual de usuario

Rockville

Rockville Power Gig RPG122K Manual de usuario

Rockville

Rockville CCL6T Manual de usuario

Rockville

Rockville BPA Series Manual de usuario

Rockville

Rockville PBL30 Manual de usuario

Rockville

Rockville CC525T Manual de usuario

Rockville

Rockville GB1 Manual de usuario

Rockville

Rockville Power Gig series Manual de usuario

Rockville

Rockville RAM12BT V2 Manual de usuario

Rockville

Rockville RBG15FA Manual de usuario

Rockville

Rockville BPA15 Manual de usuario

Rockville

Rockville RPG8BT Manual de usuario

Rockville

Rockville RMC65L Manual de usuario

Rockville

Rockville BPA12 Manual de usuario

Rockville

Rockville ROCK PARTY 6 Manual de usuario

Rockville

Rockville ROCK PARTY 8 Manual de usuario

Rockville

Rockville RPB20 Manual de usuario

Rockville

Rockville WET-5 Manual de usuario

Rockville

Rockville RPB24 Manual de usuario

Rockville

Rockville PBL20 Manual de usuario

Rockville

Rockville BPA8 Manual de usuario

Rockville

Rockville Go Party X10 Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario