Rocker Tanfil 100 Manual de usuario
INSTRUCTION
MANUAL
Tangential Flow Filtration System
Model No.
Tanfil 100
Please read this instruction manual before using this product.
Video List
1. Important Notice
1
2. Unpacking
3
3. Main Part Diagram
4
(1) Main Part
4
(2) Accessories (components, luer, tubing)
5
(3) Material
6
4. Button / Symbol / Display Explication
7
(1) Operation
7
(2) Buttons
7
(3) Symbols
8
(4) Display
8
5. Installation
9
(1) Support Base Set
9
(2) Gauge Mounting Set
9
(3) Magnetic Stirrer and Reservoir
10
(4) Three-Way Stopcock
10
(5) Tubing
11
6. Operation
12
(1) Cleaning
12
(2) Draining and Collection
13
(3) Capsule Rinsing
16
(4) Pretreatment and Concentration
18
(5) Continuous Sampling
19
Table of Contents
7. Usage and Maintenance of Capsule
20
(1) Using the Capsule for the First Time
20
(2) Cleaning after Using
20
(3) Storage of Capsule
21
8. Maintenance
22
9. Troubleshooting
22
1
This instrument is designed for laboratory usage only. Please read this manual carefully
before installing and operating. The instrument shall not be modified in any way. Any
modification will void the warranty and may result in potential hazard. We are not responsible
for any injury or damage caused by any non-intended purposes and modifying the
instrument without authorization.
1. Check the voltage specified on the name plate and ensure it matches the line voltage in
your location.
2. Please check the sample solution and the material of the instrument with chemical
compatibility chart before using.
3. Do not place the instrument nearby any flammable or explosive materials. Install the
instrument in a clean, dust-less and ventilated area.
4. During the operation, overpressure or thick liquid will cause larger loading to the motor
module, the motor module will stop automatically for self-protection. Please turn off the
power and turn it on again after 5 minutes.
5. Please clean the tubes and appearance of the instrument after using it.
6. If you have any problems with using the instrument, please contact the service crew for
help. DO NOT disassemble improperly.
7. Please discard packaging materials in accordance with relevant local regulations.
8. For more information, please check out the official website and the latest product guide.
9. Operating Condition
(a) Ambient temperature: 5~ 50°C
(b) Relative humidity: 80% RH Max.
(c) Power supply: 100-240V~, 50/60Hz, 50W
(d) Fuse: T1.5A, 250V
(e) Altitude: up to 2000 m
(f) Pollution degree: II
(g) Indoor use
1. Important Notice
2
Pressure in tubing should be less than 40 psi, or the tubing would be
expanded due to overpressure.
Please turn off and unplug the instrument before changing the fuse.
3
Please check if the package is complete without any damage before unpacking. When
unpacking, please make sure you have all accessories that indicated on the list. If there is any
problem, please keep the serial number along with packing case and contact the local
distributor or contact us by e-mail: export@rocker.com.tw immediately for assistance.
Item
Designation
Item
Designation
1
Tanfil 100 Main Unit
6
Reservoir (including Lid Kit)
2
Support Base Set
7
Gauge Mounting Set
(including Pressure Gauge) (2)
3
Tanfil 100 Repair Kit
8
Capsule Bracket
4
Power Line
9
Base for Capsule Bracket
5
Magnetic Stirrer
10
Instruction Manual
2. Unpacking
4
(1) Main Part
Item
Designation
Item
Designation
1
Main Unit
10
Reservoir
2
Operation Panel
11
Lid Kit of Reservoir
3
Pump Head
12
Screw Clamp for Tubing
4
Magnetic Stirrer
13
Retentate Pressure Gauge
5
Feed Pressure Gauge
14
Base for Capsule Bracket
6
Support Rod
15
Support Base
7
Retentate Gauge Mounting
Block
16
SPDT Power Switch
8
Capsule Bracket
17
AC Socket with Fuse (Input)
9
Feed Gauge Mounting Block
18
AC Socket for Magnetic Stirrer
(Output)
3. Main Part Diagram
5
(2) Accessories (components, luer, tubing)
Three-Way Stopcock (4)
Male Luer Coupler (2)
Male Luer Lock -
1/8” hose barb (12)
Female Luer Lock -
1/8” hose barb (1)
Female Luer Caps (2)
Tubing Clamps (13)
Tube
-ULTR-C / 1.5 m (1)
Retentate Gauge Mounting Set
(1)
Feed Gauge Mounting Set (1)
Base for Capsule Bracket (1)
Capsule Bracket (1)
Screw Clamp for Tubing (1)
Hex wrench (1)
6
(3) Material
Item
Material
Item
Material
Reservoir
PES
Gauge Wetted Parts
SS316
Reservoir Lid
PP
Gauge Mounting Block
PP
O-ring (Reservoir)
Silicon
Luer Connector
SS316, PP
Magnetic Stir Bar
PTFE Coated
O-ring (Luer)
NBR
Three-Way Stopcock
PC, POM
Tube
Silicone (platinum-cured),
TPE
Capillary Tube
PTFE
Tabla de contenidos
Otros manuales de Equipo de laboratorio de Rocker
Rocker
Rocker MultiVac 310-MS Manual de usuario
Rocker
Rocker MultiVac 310-MS Manual de usuario
Rocker
Rocker CD 200 Manual de usuario
Rocker
Rocker CR 25 Manual de usuario
Rocker
Rocker Lafil 200 Manual de usuario
Rocker
Rocker BioVac 225 Manual de usuario
Rocker
Rocker Lafil 300- LF 30 Manual de usuario
Rocker
Rocker Rocker 300 Manual de usuario
Rocker
Rocker Galaxy 330 Manual de usuario
Rocker
Rocker 197000-36 Manual de usuario
Manuales populares de Equipo de laboratorio de otras marcas
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manual de usuario
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manual de usuario
NI
NI PXI-5422 Manual
Collomix
Collomix Aqix Manual de usuario
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario
Ocean Insight
Ocean Insight FLAME-NIR+ Manual de usuario
