Thank you for choosing a Robert Smart product!
USER MANUAL
DESCRIPTION
Navigator 2 is a cutting edge universal remote control. With the Navigator
2 remote you can easily control TV and decoder from one remote, which
is particularly convenient, because in most households, where decoder
is used, TV remote control is used only to switch TV on and o. With the
Navigator 2 you can easily control all decoder functions and main TV
functions simultaneously. Codes of all most common decoder and TV
brands have been entered in the remote. It is a perfect substitute for lost
or damaged original remote control devices and ensures control of all the
main operating functions. The expanded database ensures that setup of
the Navigator 2 is fast and easy.
To start using the remote it must be programmed to TV and decoder.
To perform programming quickly and simply, please read this manual
carefully. PREPARATION
Remove the battery case cover and insert two AA/R6 1.5V batteries (not
included) matching the +/- marks to the marks in the battery case. We do
not recommend to mix simultaneously new and used batteries, use both
new batteries.
PROGRAMMING TO CONTROL DEVICES
Navigator 2 guarantees a 100% result in programming of any TV or
decoder model. It is ensured by 3 integrated programming methods:
a) Manual method. The best results in programming the remote to
control models of popular manufacturers by entering code from the
code table.
b) Automatic code search. Code search in automatic mode from
the integrated data base is suitable for rare models.
c) Learning function. If you have the original remote in working
order, Navigator 2 can read any signal of the original remote and
store it in the memory.
Start with code setup from the code table (Manual method), because this
method provides the fastest result*. Use ‘Automatic code search’ only if
remote control programming with code setup fails. The‘Learning function’
can be used optimally to add remote control commands that do not work
after entering the code. Of course, with the ‘Learning function’ you can
copy all remote control commands, but it is recommended only if using
‘Code setup’ or ‘Automatic code search’ method is unsuccessful.
The ‘Learning function’ copies signals of the original remote into the
Navigator 2. To use this method, the original remote in working order
is required. The ‘Learning function’ is ideal if you want to unite several
remotes in one and some device cannot be programmed using the code
method. Or some commands of the remote do not work even after code
search or manual entry. The necessary commands can be easily ‘learnt’
from the original remote.
UNIVERSAL REMOTE CONTROL
TV + DECODER Navigator 2
IMPORTANT: correct code setup ensures operation of the main functions;
however, in some cases some specic functions may not function. If so, in
order to ensure operation of all remote control commands, use the ‘Learning
function’ additionally.
For programming the most popular model devices, one of the mentioned
methods could be enough; in some cases an excellent result would be possible
by combining 2 or all 3 of the methods. Please, be patient, this instruction will
helpyoutondandapply the most suitable method (or combination thereof).
*The code table of most popular brands is at the end of the instruction;
in the code table below it, you can enter the codes for devices you have
found in order to nd them easily in case of necessity.
- 3 - 34-137
