Me Oi
Lk a he igh f he me ad he mbe f idicae hich me i ae
●1/32 – Se camea ide eli Options are 2304x12 30P, 120x100p 30p, 1440x100p 30P, 120x20 0P, 120x20 30P, 4x40
0P, 4x40 30P, and 20x40 30P.
●2/32 – Se he file ie This means setting the size of the photo or video. Options are M, M, 10M, 12M, 1M, 20M, 21M, 23M, 2M, 2M,
30M, and 32M
●3/32 – B ff (Burst on allows to snap multiple photos at once upon pressing the photo button). Options are 2, 3, , 10, 1, and 20
photos.
●4/32 - Recd Cam Allows to set the rear screen to show just external mini camera or to both mini cam & main camera when the mini cam is
plugged in
●/32 – Self Time Allows for a timed delay before a photo is taken. Options are and 10 seconds.
●/32 – Qali Ph ali allows to change the quality of the resolution of the photos taken with the camera. Options are S.Fine (Super
Fine), Fine, and Normal.
●/32 – Peecd : A recording can start with up to 30 seconds of footage captured by the camera prior to starting a video recording.
●/32 – P ecd : After stopping a recording the camera will continue to record for the set amount of time. Press the record button a second
time to manually cancel a set delay. Options are off, seconds and, 1 and 10 minutes.
●/32 – CaDV mde : Leave off as this is not a feature on this camera.
●10/32 - L Recd : This device does not have Loop Record. Leave this function off.
●11/32 – Sli Time : Automatically splits video recordings into segments of set times to more easily manage recordings. Each egme ill be a
eaae media file Options are off and 3, , 10, 1, 30, and 4 minutes.
●12/32 – Slide Sh : When viewing a photo file in Playback mode in photo files tab, photos will automatically be scrolled through .
●13/32 – Ifaed : Manual or Automatic: While under dark circumstances, infrared LED will help record clear image or video in HD.
●A : In low light situations (3 Lux), 4 IR LED will be turned on automatically, camera switches to infrared filter lens, video image
turns black and white. When brightness increases again, the IR LED turns off, and image becomes colorful again.
●Maal : When night vision is needed, Press the Flashlight/Infrared button to switch to infrared mode, 4 IR LED will be turned on,
video image will turn black and white. When night vision is no longer needed press the IR button to switch out of night vision.
●14/32 – Mi deec : When turned on, exit the menu to the main display screen and press record. Video recording will start if any
movements are detected and will continue to record if there is motion. If the camera does not detect a motion for 10 seconds, recording will
stop and only record again if there is motion detected. Stop this feature by pressing the record button again or turning this function off.
●1/32 – Recd Waig : the voice/vibrating that advises the user that video recording has been activated. Options are On/Off.
●1/32 – GPS : Having GPS on allows to connect to GPS satellite as to view location of where videos recordings from camera were taken on a
computer. Options are On and Off.
●1/32 – TimeZe Default is set for GMT. This setting allows to change the time zone the camera is set for. PST is -, EST is -4.
●1/32 – Lagage : Allows user to switch the language of the device.
●1/32 – Scee Sae : Allows user to set the amount of time before the device’s screen saver is on. Options are off, 30 second and, 1, 3, and
minutes.
●20/32 – LCD Bighe : Allows user to change the brightness of the device’s screen. Options are low and high.
●21/32 – A e ff : Turning this function on will cause the device to turn off after the selected time when in standby mode. Options are
30 seconds, 1, 3, and minutes.
●22/32 – LED Ligh : If on LED light will change colors depending on what the camera is doing (for example: recording). If off no LED indicators
will show.
●23/32 - Whie LED Enables a white led to be used as a flashlight or as a flashing light (beacon)
●24/32 – Ke e : When this is on the user will hear a key tone when pushing buttons on the device. Options are on and off.
●2/32 – Vlme : Altering this affects the device’s sound levels including key tone and video/audio playback files.
●2/32 - Cdig fma : H.24 - compression factor of files allows for twice the files in less room - essentially doubling the gb’s on the camera
●2/32 – Daeime am : Change the date and time of the device.
●2/32 – ID Seig : Allows to designate the camera to a specific person by entering a unique user ID.
●2/32 – Pad Having this setting on will cause the password requirement before entering menu and playback screens. Options are on
and off
●30/32 – Chage Pad : Allows the user to change password. User must enter old password and then the new password followed by
confirmation of new password using the Scroll and OK buttons. *Note: remember your new password as it is non-recoverable and will be
required to be sent back to manufacturer for resetting. This is a protection measure against unauthorized viewing of your data should the
camera be lost.
●31/32 – Defal Seig : Allows the user to reset the device to the default settings.
●32/32 – Vei : shows the version of the device.
Page
