7
5. Charging the Scooter
1. Plug the charger into a power supply (wall outlet, power strip, etc.).
2. Open the waterproof cover on the charging port, then plug the charger into the charging
port.
3. A red light means the Scooter is charging; green means it is fully charged.
4. Cover the charging port once the charger is removed.
6. Battery and Charger Information
Every RoadRunner R4 Scooter is equipped with a dedicated lithium battery and a
dedicated smart charger. Please do not use any other charger or battery with your scooter,
and do not use your dedicated charger with any other product. We are not responsible for
any damage incurred due to misuse of your charger.
1. Battery: The lithium battery provided by RoadRunner Scooters can be charged up to
600 times with no change in capacity; over 600 uses the battery’s capacity will drop to
80%. Over 1000 uses, the battery may be unsafe to use.
Maximum Voltage for full battery charge: 58.8 V
Minimum Voltage before battery dies: 42.0 V
WARNING: NEVER LEAVE SCOOTER UNATTENDED WHILE BATTERY IS
CHARGING!
2. Charger: The smart charger included with your R4 scooter automatically stops
charging and the light turns green when your scooter reaches 100%, which means it is
fully charged. The battery should be fully charged in 7-8 hours. If your battery will not
charge, please contact RoadRunner Scooters for help. If your battery is damaged due
to weather or human interaction, it is not covered under our warranty.
