Ro-Man T301 Manual de usuario
1 / 16
True wireless Bluetooth Earphone in Chinese and English
User Manual
Welcome
Thank you for choosing our products. The company Bluetooth earphone has a fashionable design, powerful functions, and
high compatibility, providing you with hands-free convenience in making calls and listening to music. It is your best choice
in office and during traveling and driving.
Bluetooth Wireless Technology
2 / 16
With the Bluetooth wireless technology, you can connect the earphone to its compatible communication devices without
using cables. The Bluetooth wireless connection allows you to use a cell phone without holding it against the earphone, but
the maximum distance between them cannot exceed 10 meters (about30 feet). The Bluetooth wireless connection may be
interfered by obstacles (such as walls) or other electronic devices.
In some areas, use of the Bluetooth wireless technology may be subject to some constraints. Please consult your local
authority or service provider for details.
3 / 16
Fully charge the earphone before using. For details about how to charge the earphone, see "Charger and Battery" in this
manual. Meanwhile, choose the cell phone that is compatible with the earphone or other Bluetooth devices to pair with the
earphone. For details about pairing, see "Basic Operations".
Tip: Keep the earphone away from your credit card or other magnetic storage media; otherwise, the stored information may
be lost due to demagnetization.
How to connect with the Bluetooth earphone (Note: Use iPhone for example)
For customer’s convenience of operation, the left- and right-channel stereo of the two Bluetooth earphones has been paired and connected
before leaving factory.
●Dual-earphone mode – Initial use of the earphone
1. During the first use, take the left- and right-channel earphones out of the charging box and remove the switch-on stickers. Then put the
earphones back into the charging box. The indicators turn blue and the earphones are activated.
2. Take the left- and right-channel earphones out of the charging box, and the earphones will automatically complete AiroStereo pairing
and connection. Then the indicator on the main earphone (left-channel earphone) will blink red and blue alternately.
3. Turn on Bluetooth on your mobile phone, and search for the main earphone (L) Bluetooth device.
4 / 16
4. Once the Bluetooth earphone is found, tap Pair to complete connection.
●Dual-earphone mode – Automatic pairing
1. Take the left- and right-channel earphones out of the charging box, and the earphones will automatically complete AiroStereo pairing
and connection.
2. For Bluetooth devices that were paired with before, the earphones will automatically pair with the device.
●Dual-earphone mode – Manual pairing (After failure of earphone pairing during first use)
1.Method 1: When the headset is taken out from the charging cradle, the headset will power on automatically, and a voice tone “Powering on”
5 / 16
prompts. Long press the MFB buttons on both the left and right earphones until the purple indicator flashes. Then the left and right earphones
will be paired and connected automatically, with a voice tone “Paired and connected” prompted. The left earphone prompts "Left channel" and
the right one prompts "Right channel".
Method 2: Press the MFB buttons on both the left and right earphones for about 5s. The red indicator is off, and both the earphones power off.
Long press the MFB buttons on both the left and right earphones until the purple indicator flashes. Then the left and right earphones will be
paired and connected automatically, with a voice tone “Paired and connected” prompted. The left earphone prompts "Left channel" and the right
one prompts "Right channel".
2.The main headset (L) will automatically go to the red and blue lights flashing alternately.
3.Turn on Bluetooth on your mobile phone, and search for the main earphone (L) Bluetooth device.
4.Once the Bluetooth earphone is found, tap Pair to complete connection.
6 / 16
●Single-earphone mode (Using any of the earphones independently)
1. Method 1: when the headset is removed from the charging base, the headset is automatically turned on and the red and blue lights are
alternately flashing and paired.
Method 2: long press the multifunction key of headphone (MFB) about 3s, accompanied by 'boot' prompt sound, enter red and blue light
alternately flicker pair state
2.Turn on the Bluetooth of your phone and search for Bluetooth devices. Select the earphone to complete Bluetooth pairing.
7 / 16
Basic Operations
○
AiroStereo pairing mode:When the headset is removed from the charging base, it is automatically turned on,
accompanied by a "boot" prompt Press MFB of the left and right earphones for a long while till an indicator
quickly blinks purple (The other two indicators blink red and blue at the same time); then, the left and right
earphones can be paired and connected automatically and a voice prompt “Pairing successful , Connected”
sounds. The voice prompt “Left Channel” sounds from the left-channel earphone, and “Right Channel”
sounds from the right-channel earphone.
Search for Bluetooth devices
Complete Bluetooth pairing
8 / 16
○
Power-on pairing: When the left and right earphones are off, press MFB for about 3s. The earphones are
powered on with a prompt tone “Du, Power On”, and then automatically enter the pairing mode.
○
Connection: After the left and right earphones are AiroStereo paired and taken from the charging cradle,
your mobile phone will find T301_L and T301_R through Bluetooth. The red and blue indicators on the main
earphone (T301_L) will flash alternately. Select the main earphone to connect, and a voice tone “Paired,
second device connected” will prompt. If the pairing record has been cleared, the earphones need to enter
the AiroStereo pairing mode again, otherwise the right earphone won’t automatically connect to the left one,
and can only be used independently.
○
Hang-up: During a call, press the MFB button on the left/right channel headphone once. A beep is
prompted.
○
Rejecting a call: When a call comes in, double press the MFB button on the left/right channel headphone.
A voice message “Rejected” is prompted.
Audio transfer: During a call, long press the MFB button on the left/right channel headphone, and release
until a beep is prompted. Repeat this operation to transfer the audio between your phone and headset.
9 / 16
○
Mute/Unmute: During a call, double press the MFB button on the left/right channel headphone. A voice
message “Mute” is prompted. Repeat this operation to unmute the call. A voice message “Unmute” is
prompted.
○
Answering a call: When a call comes in, press the MFB button on the left/right channel headphone once. A
beep is prompted.
○
Auto re-dial: When the headset is in connected standby status, double press the MFB button on the
left/right channel headphone. A voice message “Auto re-dial” is prompted. Press the MFB button once to
cancel the re-dial, and a voice message “Dial cancelled” is prompted.
○
Music playing/pausing: When the headset is playing music, press the MFB button on the left/right channel
headphone once to pause. Repeat this operation to restart playing.
○
Clear pairing record：When the headset is being charged, double press both the MFB buttons on the left and
10 / 16
right channel headphones. The LED indicator blinks red for 3 times.
○
Automatic re-connection: After the earphone are powered on, they are actively re-connected to the last
paired one devices.
○
Chinese / English voice switching：Take out the main (left channel) headphone from the charging cradle,
and long press the MFB button for 5s to enter the AiroStereo pairing mode. (The indicator will turn purple).
Then double press the MFB button to switch the language for voice message. A voice message is prompted.
Take out the right channel headphone, and it will automatically synchronize the language set in the main
headphone.
○
Three-way call：During a call, if another call comes in,
- Press the MFB button on the left/right channel headphone once to hang up the current call and answer the
incoming call.
- Double press the MFB button on the left/right channel headphone to keep the current call (A) and answer
the incoming call (B). Double press the MFB button again to switch between calls A and B.
- During a three-party call, press the MFB button on the left/right channel headphone once to hang up the
current call.
○
Auto Power-on: Pick up the earphone from charging box, the earphone will auto power-on.
Tabla de contenidos
Otros manuales de Auriculares de Ro-Man
