Riso Comcolor Series Manual de usuario
Riso Comcolor Series
Geƫng Started Guide
Making Copies
Riso (UK) Limited
Copy Mode V. 1
2). A4 / A3 Producing a Copy
3). Enlarging A4 to A3
4). Reducing A3 to A4
5). Producing Double Sided (Duplex) Copies
6). Mul-up
7). Stapling (OpƟonal Finisher Unit required)
8). General Machine Care
9/10). Operaonal Panel Layout
Contents
Please Note
This publication is intended as a brief introduction to the basic Copy Mode
functions of the Riso Comcolor printer.
For full instructions please refer to the user guides supplied with
the Riso machine.
Load the original(s) in the ADF of the Comcolor
scanner in the following orientaƟon:
The “Copy Mode” panel will now appear:
1). The “Color Mode” should be set to “Auto”
This can be changed to “Black” if you want to convert
colour documents to black and white
2). “Feed Tray” should be set to “Auto”
In this seƫng the output paper size will be matched to your
original size.
A
C
B
2
A4 / A3 Producing a Copy
Select number of copies required.
1). Press green “Start” buon
2). Press red “Pause” buon to pause job if required
D
A4 A3
Select “Copy” Mode
Please note login may be required.
Please note: Comcolor models 3050 and 3010 will not print full A3 size as they have a
maximum print width of 210mm. Model 3010 is equipped with a single paper feed tray
The “Copy Mode” panel will now appear:
1). The “Color Mode” should be set to “Auto”
This can be changed to “Black” if you want to convert
colour documents to black and white
2). Select “Reproducon Size”
Choose: 141% A4 - > A3
Select OK
3). Select “Feed Tray”
4). Choose the Feed Tray containing A3 size
(normally Feed Tray 3)
Select OK
3
Enlarging A4 to A3
Load the A4 original(s) in the ADF of the Comcolor
scanner in the following orientaƟon:
A
C
B
Select “Copy” Mode
Please note login may be required.
Select number of copies required.
1). Press green “Start” buon
D
Please note: Comcolor models 3050 and 3010 will not print full A3 size as they have a
maximum print width of 210mm. Model 3010 is equipped with a single paper feed tray
4
Reducing A3 to A4
The “Copy Mode” panel will now appear:
1). The “Color Mode” should be set to “Auto”
This can be changed to “Black” if you want to convert
colour documents to black and white
2). Select “Reproducon Size”
Choose: 71% A3 - > A4
Select OK
3). Select “Feed Tray”
4). Choose a Feed Tray containing A4 size
Load the A3 original(s) in the ADF of the Comcolor
scanner in the following orientaƟon:
A
C
B
Select “Copy” Mode
Please note login may be required.
Select number of copies required.
1). Press green “Start” buon
D
3). For duplex originals and/or copies specify how pages are
turned in “Paging Direcon”
A). B).
Select “LeŌ/ Right” Select “Top / BoƩom”
4). Press “OK”
Producing Double Sided Copies
Firstly complete secƟons A to C as shown on page 2
1) Select “Duplex / Simplex”
The “Duplex / Simplex” panel will appear:
1). In the “Original” secon one of the following:
A). “Simplex” if your originals are sigle sided
B). “Duplex” if your originals are duble sided.
A
B
2). In the “Output” secon one of the following:
A). “Simplex” if you require sigle sided copies
B). “Duplex” if you require double sided copies.
5
2). In “Mul-up” select one of the following:
A). “Plural” to copy mulple images of different
pages onto a single sheet
B). “Single” to copy mulple images of the same
original onto a single sheet.
Firstly complete secƟons A to C as shown on page 2
1) Select “Funcons” Tab
1). In “Funcons” select “Mul-up”
A
B
3). In “Pages / Sheet” specify how many images to be placed
on one sheet:
A). Select 2, 4, or 8 images per sheet
B). “Output Image show a preview of the image
with current sengs applied.
4). Press “OK”
MulƟ-up
6
Firstly complete secƟons A to C as shown on page 2
1) Select “Funcons” Tab
1). In “Funcons” select “Staple / Punch”
A
B
2). In the “Mul-up” secon:
A). In “Binding Side” select side of sheet(s) to be
stapled.
Choose “LeŌ, Right or Upper”
B). In “Staple” select stapling opon:
Choose “1 Posion” or “2 Posion”
3). Press “OK”
Stapling (OpƟonal finishing unit required)
1 Position
2 Position
7
General Machine Care
Cleaning the Scanner Glass
Ensure both secons of scanner glass (shown here in
blue) are kept clean to avoid marks on copies
Using the Scanner
When using the scanner place originals face up and as
far into the document feeder as possible
Ensure side guides are firm against the originals
Loading Paper
Always ensure the guides on the paper tray are firm
against the paper
The locking levers must be in the down posion
Paper
When reloading paper stock always use complete
reams of fresh paper.
DO NOT USE any of the following
Paper that is damp or curled
Glossy or coated papers
Film or transparencies
8
OperaƟonal Panel Layout
Wake up Key
Lights up when the machine is in the backlight OFF or sleep
status.
Main power Lamp
Lights up when the main power is “ON”.
Sub power Key
Use to turn the power ON and OFF. Lights up when the
power is ON. To switch to OFF, press and hold.
Interrupt Lamp
Lights up during copy interrupt.
RESET Key
Interrupt Key
Press to temporarily stop the copying that is in progress and
erent copy job.
STOP Key
Press to stop the job that is in progress.
START Key
Start Lamp
Lights up when the START key is ready to be used.
9
Otros manuales para Comcolor Series
3
Tabla de contenidos
Otros manuales de Impresora de Riso
Riso
Riso HC5500 Manual de usuario
Riso
Riso RZ Series Manual de usuario
Riso
Riso RZ1090 Manual de usuario
Riso
Riso 9050 Guía del usuario
Riso
Riso RISOGRAPH RN2000 Manual de usuario
Riso
Riso HC FINISHER Manual de servicio
Riso
Riso HC5500 Manual de usuario
Riso
Riso Comcolor Series Manual de servicio
Riso
Riso ComColor GL Series Manual de usuario
Riso
Riso ComColor FW Series Manual de usuario
Riso
Riso HC5500T Manual de usuario
Riso
Riso VALEZUS T1200 Manual de usuario
Riso
Riso MiScreen Manual
Riso
Riso MZ970 Manual de usuario
Riso
Riso RZ9 Series Manual de usuario
Riso
Riso SF Series Manual de usuario
Riso
Riso EZ Series Manual de usuario
Riso
Riso KZ30 Manual de usuario
Riso
Riso HC5000 Guía del producto
Riso
Riso HC5500T Manual de usuario
