MORPHEUS
MINI-TOWER
MID-TOWER
COMPONENTSECTIONS
OVERVIEW
RIOTOROMorpheus,the world's first convertible PC case, allows you to resize
yourPCas your needs evolve. Morpheus can easilyshape-shiftto and from a
shortortall ATX mid-tower.The entire exterior is perforated mesh, which combined
withthestock dual 140.0 mm fans, keeps your PC’s components running cool and
quietevenin extreme gaming configurations. Plenty of easy-to-install cooling
optionsareavailable thanks to a removal cooling mount and support for additional
fansortwo 240mm radiators. Tool-less features, combined with the strategically
placedcablerouting channels, drive trays, and cooling bracket, make building
Morpheusasnap. Plus we added state-of-the-art USB Type-C and USB 3.0 ports
forhigh-speedconnections to modern storage and mobile devices.
RIOTOROINC.
CONFIGURATIONS:
PATENTPENDING
271.0x400.0x 466.0 mm 271.0x466.0x 466.0 mm
-Resizablefrom mid-to-mini tower height
-High-densityperforated mesh on all sides for superior cooling
-USB-Cand USB 3.0 ports
-Dualcompartments with streamlined airflow and isolate heat
-SupportsE-ATX, ATX, microATXand mini-ITX motherboards
-Dual120.0 mm fans, additional mounts for 140.0 mm fans and
240.0 mm water coolers
-Optimizedcable routes, mount points hassle free assembly
-2x3.5-inch HDD plus, up to 4x 2.5-inch SSD out of the box
SectionOne:take out components from protective bag, remove security thumb screws, position back panel in an upright position and
tightenthescrews. If you are building a Mini-Tower configuration make sure to change the expansion bracket and adjust back panel size.
ASSEMBLY
SectionTwo:take out components from protective bag, position and screw middle panel to section one. If you are building a Mid-Tower
configurationmakesure to add the expansion to the middle section, SSD expansion caddy and tighten screws.
SectionThree:take out components from protective bag, remove security thumb screws, position front panel in an upright position and
tightenthescrews. If you are building a Mini-Tower configuration, make sure to adjust front panel size, screw components to previous
assemblyandtighten screws.
SectionFour:take out components from protective bag and use red thumb screws to secure to previous sections. If you are building a
Mini-Towerconfigurationmake sure to adjust side panel size.
KEYDESIGN ELEMENTS
BACKPANEL
-High-airflowperforatedmesh panel
-1x80.0mm exhaust fan
BOTTOMPANEL
-High-airflowperforatedmesh panel
-2x120.0mm or 140.0 mm fans
-ABSfeet
-Easilyaccessibledust filters to help
keepthe computer clean
MIDDLEPANEL
-Dualchamberconfiguration
-CPUcutoutwith rubber grommets, cable
andmanagement routes with velcro ties
-Mini-Tower&Mid-Towercomponents
-Removablestoragebrackets for 2x HDD
andup to 4x SSD
-Removablebracketwith mounts for
2x120.0 / 140.0 mm fans or up to
280.0mm radiators
FRONTPANEL
-High-airflowperforatedmesh panel
-RedLEDRIOTORO bullhead logo
TOPPANEL
-High-airflowperforatedmesh panel
-I/Opanelwith 2 x USB Type-C,
2xUSB 3.0, 1 x Headphone,
1xMicrophone, RGB fan control
(mode,color, brightness)
SIDEPANEL
-High-airflowperforatedmesh panel
-LeftandRight panels each consist of
threeresizable mesh sheets
-Magneticdustfilter
WHAT’S IN THE BOX
QTY
ITEM IMAGE USEDESCRIPTION
SECTION 1
SECTION 2
SECTION 3
Mouse Pad
1Build the base &
back strucure
Build the middle
structure
Build the front &
top structure
Surface protection
& quick reference
1
1
1
1
2
3
4
5Side panel with
magnetic filter
Cover both sides
of the case
2
Before You Begin 5
CONVERTIBLE PC CASEMORPHEUS
