Rio Salon Laser Tweezer Manual de usuario
user guide
www.riobeauty.com
Rio, Dezac and Salon Laser Tweezer are trademarks of The Dezac Group Ltd. © The Dezac Group Ltd 2012
Manufactured by The Dezac Group Ltd, PO Box 17, Cheltenham, England GL53 7ET
1-IN-LATW-UK/2.0
This product MUST
be used responsibly
Read all instructions
thoroughly before
use and retain for
future reference
© The Dezac Group
© The Dezac Group
© The Dezac Group
If you have any questions, or if you experience any difficulties please call our
808nm wavelength
Wearing laser safety goggles is
unnecessary as the product has been
designed with inbuilt safety features.
CLASS 1 PRODUCT
CONTAINING
CLASS 3B LASER
© The Dezac Group
© The Dezac Group
© The Dezac Group
1SALON LASER TWEEZER™
1-IN-LATW-UK/2.0
•Read all instructions thoroughly
and retain for future reference.
•Thisappliancecanbeusedbychildren
aged8yearsandaboveandpersons
with reduced physical, sensory
or mental capabilities or lack of
experienceandknowledgeiftheyhave
beengivensupervisionorinstruction
concerningtheuseoftheappliance
in a safe way and understand the
hazardsinvolved.Childrenshallnot
playwiththeappliance.Cleaningand
maintenance shall not be made by
childrenwithoutsupervision.
•NotsuitableforAfro-Caribbeanor
blackskincomplexions.Notsuitable
forgreyhair.
•DoNOTtreatthefollowingareas:
Tattoos,pimples,warts,blackspots,
birthmarks,burns,nipples,eczema,
eyelashesorhairneartheeyes.
•DoNOTtreatthesamehair/area
repeatedlyinanyonesession.
•DoNOTuseafterdrinkingalcoholor
ifyouarefeelingunwellorfatigued.
•DoNOTusenearammable
materials.
WARNINGS
© The Dezac Group
© The Dezac Group
© The Dezac Group
2
SALON LASER TWEEZER™
•DoNOToverrideanysafetyfeatures
oropentheunit.
•Onlyusewiththepoweradapter
supplied.
Note
•Laserhairremovalshouldnot
causediscomfort.Ifyoufeelany
discomfortorsorenessthesetting
maybetoohighoryourskintone
(colour)isnotsuitableforusewith
thisproduct.
•Powerlevelsshouldbeselected
basedonyourskintypeasdenedin
the‘FitzpatrickSkinTypes’section.
WARNINGS
© The Dezac Group
© The Dezac Group
© The Dezac Group
3SALON LASER TWEEZER™
INTRODUCTION
Laser hair treatment gives a long term solution to permanent hair reduction. Treating hairs
to kill the hair root permanently has a high success rate, giving lasting results. This guide
will help you to achieve the hair reduction you are looking for, so please read it carefully.
If you have any questions or suggestions, please call our customer care representatives
on 01242 702345. They will be delighted to help you get the best results from your
Salon Laser Tweezer.
© The Dezac Group
© The Dezac Group
© The Dezac Group
4
SALON LASER TWEEZER™
1Wand
2DC power socket (on the back)
3Keyswitch
4Enable button
5Power level increase button (+)
6Power level decrease button (-)
7Power level indicators
8Wand - treatment button
9Laser Shroud
0Wand - Skin sensors
!Wand - Orange light
@Wand - White light
£Laser aperture
$Mains adapter
%Keys
3
1
4
5
6
$
2
%
7
! @
0
0
£
8
9
WAND
© The Dezac Group
© The Dezac Group
© The Dezac Group
5SALON LASER TWEEZER™
HOW DO LASERS WORK?
Lasers deliver an intense beam of light which are made
up of a single wavelength or colour. Skin is essentially
transparent to light in the wavelength range of 600-1100nm
(nano meters), while melanin containing structures will
absorb laser energy of this wavelength. It is therefore
possible to target the hair follicle which has a concentration
of melanin without affecting the surrounding area.
The light energy absorbed by the melanin pigment results
in the rapid heating up of the hair follicle. This heat destroys
the cells (papilla) responsible for hair growth. If adequate
heating is achieved, then the follicle is permanently
disabled resulting in a permanent reduction in hair growth.
SUITABLE SKIN TYPES
Melanin in the epidermis also absorbs the energy and
limits the depth of penetration of the laser light into the
skin. Using a light wavelength of 808nm enables treatment
of relatively dark skin as well as fair-skin types. However,
laser hair treatment is not suitable for Afro-Caribbean or
black skin complexions. Laser treatment is also ineffective
in removal of white or grey hair. Electrolysis should be
considered as an alternative treatment.
PATCH TEST
As a guide, skin colours are classified by the Fitzpatrick
skin phototypes as described in the table opposite.
24 hours before treatment check for any reaction by testing
a few hairs in the area to be treated.
The (+) and (-) buttons increase or reduce power levels.
Treat 2–3 hairs on each power level up to the maximum
power level for your skin type (see table). If you feel any
discomfort the previous lower power level is the maximum
power level you should use.
After 24 hours if any of the test areas appear red or
inflamed for any particular power level, select a lower level
for treatment.
NOTE: Skin colour varies on different areas of the body,
you may find that you need different power level settings
for different areas. Each area should be tested for the
appropriate maximum power level.
© The Dezac Group
© The Dezac Group
© The Dezac Group
6
SALON LASER TWEEZER™
FITZPATRICK SKIN PHOTOTYPES
Power levels should be selected based on your skin type as defined below.
Skin Type Skin Colour
Tanning History
Maximum Power Level
IVery fair,
“transparent”
Always burns,
never tans Subject to patch test
all 5 power levels can
be used
II Fair Always burns
III Fair to light olive Burns mildly
Subject to patch test
power levels 1, 2 and 3
can be used
IV Olive/Brown Rarely burns,
tans with ease
VDark brown Very rarely burns
NOT suitable for Laser Hair Removal treatment
VI Black Never burns
© The Dezac Group
© The Dezac Group
© The Dezac Group
7SALON LASER TWEEZER™
the hair from the follicle, as this renders the
treatment ineffective.
area.
treated 24 hours prior to treatment and are aware
You may find it helpful to use a mirror
for treating hard to see areas, such as
the face and underarms. A mirror with
5–10 times magnification is ideal for
this.
The hair needs to be visible enough
for the laser to be aimed at the base
of the hair. Long hairs may be trimmed
before treatment if necessary.
Plug the Adapter into the socket on the
back of the unit and into the Mains.
1
2
INSTRUCTIONS FOR USE
© The Dezac Group
© The Dezac Group
© The Dezac Group
8
SALON LASER TWEEZER™
INSTRUCTIONS FOR USE
3
Use the Key to unlock the Keyswitch.
The unit will emit 3 beeps and the 1st power level button will flash blue.
Enter the security code by pressing the buttons (highlighted in black) in the following order:
Note: The unit will power off if the code is incorrectly entered. Turn the key off, wait a few seconds and then turn the key
back on and enter the correct security code.
4
© The Dezac Group
© The Dezac Group
© The Dezac Group
Tabla de contenidos
Otros manuales de Depilador de Rio
