Rime Lite UNION 2 Manual de usuario
1
USER GUIDE
UNION 2 / 4 / 6
Please read this manual before operating UNION, and keep it for future reference.
2
Index
Introduction
Intellectual Property
Safety Introduction
Unpacking
Layout
Specification
Operation Instruction for UNION
Operation Instruction for SWING
Check list when troubling
Replacing lamp and flash tube
Accessories
Warranty
P03
P03
P04
P05
P06
P07
P08
P09
P10
P11
P13
P14
3
INTRODUCTION
Thank you for your choice for UNION.
UNION is designed for all photographers. It gives quicker and easier operation and great satisfaction for professional photographers. UNION is made of
superior electric components in the world. ( Capacitor : Rubicon Company [only made in Japan], Flash Tube : Perkin Elmer Company [ Only made in
Singapore])
Rime Lite telecommunications
Web: www.rimelite.com
Facebook: rimelites
Twitter: @rimelites
Headquarters: Hyundae Photonics B/D, 118-16, Chimsan-Dong, Buk-Gu, Daegu, South Korea.
Tel: 82–53–359–1445 / Fax: 82–53–359-0333
INTELLECTUAL PROPERTY
All intellectual property, owned by or which is otherwise the property of Rime Lite or its respective suppliers relating to UNION, including but not
limited to, accessories, parts, or software, is proprietary to Rime Lite. No title to or ownership in the intellectual property is transferred to you. All
applicable rights of the intellectual Property shall remain with Rime Lite and its suppliers.
4
Safety Instructions
Please read and understand all the instructions to avoid injury to yourself and/or damage to
UNION
-Do not expose to extream temperatuers ( above 140℉or below -4℉, or above 60℃or below -20℃).
-Do not expose to moisture. Do not use UNION near water.
-Do not let any foreign matter spill into UNION
-Do not expose to chemicals such as benzene and thinners. Do not use liquid or aerosol cleaners. Clean with a soft damp cloth only.
-Do not expose to direct sunlight or heat sources for a prolonged period.
-Do not try to disassemble and/or repair UNION yourself.
-Do not subject UNION to severe impact,
-Do not place heavy objects on UNION.
-Do not jubject UNION to excessive pressure.
-Do not touch UNION with wet hands
-Do not store in dusty areas.
Please be aware that Rime Lite clains no responsibility for damage from data loss due to breakdwon, repair, or other causes.
5
Unpacking
Your package contains the following items.
MIRA Power Cable Synchro Cable Halogen
You can obtain the following accessories for UNION from your local dealer:
Trigger Receiver
SWING SWING
6
Layout
Cursor
Description
Cursor
Description
①
Protecting Glass
⑨
Modeling Lamp Fuse
②
Modeling Lamp
⑩
LCD Display
③
Flash Tube
⑪
Synchro Socket
④
Modeling Base
⑫
Digital Encoder
⑤
Umbrella Holder
⑬
Power Switch
⑥
Locking Holder
⑭
Receiver Holder
⑦
Photocell
⑧
Main Inlet
7
SPECIFICATION
8
Operation Instruction for UNION
A. Insert a power cord into the main Inlet.
B. Turn the power switch ON
C. Before switching off, better to set all buttons & indicators to “Minimum”or “OFF”
Adjusting Flash Output
1. How to adjust Flash Power Output
- Press Digital Volume once, then you can see below image.
- Turn the Digital Volume right or left if you want to control the output.
2. How to adjust Modeling Light
- Press Digital Volume twice, then you can see below image.
- Turn the Digital Volume right or left if you want to control the modeling Light.
3. How to adjust Flash & Modeling Light
- Press Digital Volume three times, then you can see below image.
- Turn the Digital Volume right or left if you want to control the flash and modeling Light.
9
Operation Instruction for SWING
Before you use SWING with UNION, please power off strobes. You will experience the great performance of both strobe and SWING.
Transmitter
- Join the transmitter to a digital camera
Receiver
- Join the receiver to a strobe.
Notice) when a user set the channel of SWING, the user should adjust the same number of both transmitter and receiver.
It can set the maximum 6 strobes per a transmitter under the same channel
If a user uses over 6 strobes under the same channel, the effective distance from both a transmitter and a receiver can be shorter.
TEST Button
The LED lamp is flickered when a user presses “TEST”button.
10
Check list when troubling
1. Cannot turn on the power.
1) Please check the power switch on.
2) Please check the power cable inserted correctly.
2. Unit does not flash.
1) Please check the flash tube inserted correctly.
2) Please check the trigger coil contacted with the flash tube legs.
3) Please change the flash tube.
3. Unit does not recharge.
1) Please check the power cable inserted correctly.
2) Please check the unit voltage supplies it correct.
3) Please change the fuse.
4. Ready “beep”does not sound.
1) Please check the “SOUND”button pressed.
2) Please make sure the unit fully recharging.
5. Unit does not fire from sync connection or transmitter or remote control.
1) Check the sync cord or receiver is inserted correctly.
2) Try another sync cord or wireless system.
6. Unit sounds long “beep”sound.
1) It has been started in “overheat”mode and it turns off automatically. After a break for cooling down (from 5 min. to 10 min.),
you can turn it on again.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Equipo de iluminación de Rime Lite
Rime Lite
Rime Lite F Series Manual de usuario
Rime Lite
Rime Lite i.6 Manual de usuario
Rime Lite
Rime Lite i.2A Manual de usuario
Rime Lite
Rime Lite HL1K Manual de usuario
Rime Lite
Rime Lite Ni-flash Manual de usuario
Rime Lite
Rime Lite XB PRIME 3 Manual de usuario
Rime Lite
Rime Lite i.Grandbox 16 Manual de usuario
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
