Rigol BatHolder138 Manual de usuario

Guaranty and Declaration

Trademark Information

RIGOL®is the trademark of RIGOL TECHNOLOGIES CO., LTD.

Notices

•RIGOL products are covered by P.R.C. and foreign patents, issued and pending.

•RIGOL reserves the right to modify or change parts of or all the specifications and pricing

policies at the company's sole decision.

•Information in this publication replaces all previously released materials.

•Information in this publication is subject to change without notice.

•RIGOL shall not be liable for either incidental or consequential losses in connection with the

furnishing, use, or performance of this manual, as well as any information contained.

•Any part of this document is forbidden to be copied, photocopied, or rearranged without prior

written approval of RIGOL.

Product Certification

RIGOL guarantees that this product conforms to the national and industrial standards in China as

well as the ISO9001:2015 standard and the ISO14001:2015 standard. Other international standard

conformance certifications are in progress.

If you have any problem or requirement when using our products or this manual, please contact

RIGOL.

E-mail: ser[email protected]

Website:

http://www.rigol.com

Section Description Page

List of Figures................................................................................................................................. II

List of Tables..................................................................................................................................III

1 Safety Requirement .........................................................................................................1

1.1 General Safety Summary .................................................................................................................. 1

1.2 Safety Notices and Symbols ............................................................................................................ 1

1.3 Battery Holder Using Requirements ............................................................................................. 2

1.4 Battery Installation Requirements ................................................................................................. 2

1.5 Battery Holder Storage Requirements ......................................................................................... 3

1.6 Battery Holder Disposal Requirements ........................................................................................3

1.7 Environmental Considerations ........................................................................................................4

2 Product Features .............................................................................................................. 5

3 Document Overview ....................................................................................................... 6

4 General Inspection ...........................................................................................................7

5 Battery Holder Overview ...............................................................................................8

6 To Use the Battery Holder .......................................................................................... 10

6.1 To Install Batteries .............................................................................................................................10

6.2 To Install Battery Holder .................................................................................................................11

6.3 To Remove Battery Holder .............................................................................................................13

6.4 Activation .............................................................................................................................................14

6.5 Self-calibration ...................................................................................................................................16

6.6 To Charge Battery Holder ...............................................................................................................17

6.7 Battery Capacity Indicator ..............................................................................................................18

6.8 To Manage Battery Holder .............................................................................................................18

7 Troubleshooting .............................................................................................................21

8 Specifications .................................................................................................................. 23

9 Battery Shipping Label .................................................................................................25

10 Appendix ...........................................................................................................................26

10.1 Appendix A: Accessories .................................................................................................................26

10.2 Appendix B: Warranty ......................................................................................................................26

List of Figures

Figure 5.1 Battery Holder Front/Rear View ....................................................................... 8

Figure 6.1 Battery Installation Sequence .........................................................................11

Figure 6.2 Activator .................................................................................................................14

Figure 6.3 Connect the Activator ........................................................................................15

BatHolder138 User Guide

List of Tables

Table 6.1 Recommended Battery Model ......................................................................... 11

Table 6.2 LED Indicator - Charging ....................................................................................18

Table 6.3 LED Indicator - Standby and Discharging .................................................... 18

Table 8.1 Specifications ..........................................................................................................23

Table 8.2 Battery Performance ............................................................................................23

Table 8.3 Environmental Specifications ............................................................................24

Table 8.4 Mechanical Characteristics (Battery Holder) ............................................... 24

III

BatHolder138 User Guide

1Safety Requirement

1.1 General Safety Summary

Please review the following safety precautions carefully before putting the product

into operation so as to avoid any personal injury or damage to the product and any

product connected to it. To prevent potential hazards, please follow the instructions

specified in this manual to use the product properly.

When using this product, you may need to use other devices. For warnings and

precautions of using those devices, refer to the "Safety Requirement" provided in

their manuals.

1.2 Safety Notices and Symbols

Safety Notices in this Manual:

WARNING

Indicates a potentially hazardous situation or practice which, if not avoided, will result in

serious injury or death.

CAUTION

Indicates a potentially hazardous situation or practice which, if not avoided, could result

in damage to the product or loss of important data.

Safety Notices on the Product:

• DANGER

It calls attention to an operation, if not correctly performed, could result in injury

or hazard immediately.

• WARNING

It calls attention to an operation, if not correctly performed, could result in

potential injury or hazard.

• CAUTION

It calls attention to an operation, if not correctly performed, could result in

damage to the product or other devices connected to the product.

Safety Symbols on the Product:

Safety Requirement

Hazardous

Voltage

Safety Warning Protective Earth

Terminal

Chassis Ground Test Ground

1.3 Battery Holder Using Requirements

•Do not use the battery holder in an environment of water and corrosive gases.

•Do not use the battery holder in environments that are outside the specified

range.

•The battery holder does not support hot swapping. Before installing or removing

the battery holder, power off the instrument and disconnect all charge/discharge

cables to avoid damaging the instrument or battery holder.

1.4 Battery Installation Requirements

•Although the battery holder has the reverse polarity protection, install the

batteries correctly according to the designation of polarity (+ and - symbol) on

the battery holder cover, as is shown in the figure below. Reverse polarity may

cause self-calibration error and even damage the battery holder in the long

term.

Positive End

Negative End

•Do not install any batteries other than the 18650 Lithium-ion batteries, even if

they are of the same size.

•Only use 18650 Lithium-ion batteries. Do not insert 16650 or 12700 batteries

into the battery holder using the conversion device.

•Tighten the cover after inserting Lithium-ion batteries in the battery holder.

•Use new Lithium-ion secondary batteries (hereinafter referred to as Li-ion

batteries) of the same model and state[1] with 3.0 V to 4.2 V initial voltage and

3000 mAh to 3500 mAh nominal capacity per unit. For the battery specifications,

refer to

Table 8.2 Battery Performance

Safety Requirement

BatHolder138 User Guide

•Use batteries with security guarantee. Otherwise, fire or explosion may occur to

bring immeasurable losses. RIGOL shall not be liable for those losses.

•Before and after installation, inspect the battery holder carefully to ensure no

foreign objects (e.g. water, sheet metal, flammable label) inside the battery

holder.

NOTE

[1]: The same state means that the voltage variations of all battery cells should lie between ±50

mV (3.6 V to 4.0 V) and ±100 mV (3.0 V to 3.6 V/4.0 to 4.2 V).

1.5 Battery Holder Storage Requirements

•Store the battery holder at temperatures between -10℃ and 50℃ with less than

80% relative humidity without condensation.

•Store the battery holder in an environment free of corrosive gases.

•Do not modify the battery holder.

•Do not hit the battery holder or drop it onto the hard floor. Otherwise, its casing

will be distorted, causing damage to internal structure of the battery holder. It

may make it difficult to remove batteries or even damage the internal circuit to

bring fire or explosion.

•Keep the battery holder away from exposed metal objects or particles because

they may cause a short-circuit or damage the battery holder.

•When the battery holder is stored with batteries installed, it is recommended to

perform a discharge-charge cycle or charge the battery every 3 months. You can

also press the button to check the battery capacity regularly. Otherwise, the self-

discharge of the battery holder would make the battery run out of charge and

reset the battery holder or even cause irreversible damage to the battery.

•If you do not use the battery holder for an extended period, it is recommended

to remove the batteries.

•The batteries inside the battery holder have a shelf life. Preserve, maintain, and

replace the batteries properly according to the battery manual.

•When shipping the battery holder, please use a Li-ion battery label. For details,

pleases refer to

Battery Shipping Label

1.6 Battery Holder Disposal Requirements

•When the battery holder is ready for disposal, remove all battery cells before

disposing of the battery holder. As lithium-ion batteries are classified as

Safety Requirement

hazardous waste, please properly dispose of them according to local

government regulations.

•When all batteries are removed, be free to dispose of the battery holder.

•Never dispose of the battery holder in fire or its internal electrical components

may emit toxic fumes. It can even cause explosion or serious personal injury if

the battery holder still contains batteries.

1.7 Environmental Considerations

The following symbol indicates that this product complies with the WEEE Directive

2002/96/EC.

The equipment may contain substances that could be harmful to the environment or

human health. To avoid the release of such substances into the environment and

avoid harm to human health, we recommend you to recycle this product

appropriately to ensure that most materials are reused or recycled properly. Please

contact your local authorities for disposal or recycling information.

You can click on the following link

https://int.rigol.com/services/services/declaration

to download the latest version of the RoHS&WEEE certification file.

Safety Requirement

BatHolder138 User Guide

Tabla de contenidos

Manuales populares de Paquete de baterías de otras marcas

Acumentrics

Acumentrics PACK-POWER SYSTEM Manual de usuario

ACDC Dynamics

ACDC Dynamics SPF12-50 Manual de usuario

Aegis

Aegis ABL-72020P Manual de usuario

Dyness

Dyness TowerESS Manual de usuario

Growatt

Growatt APX 5.0P-S0-US Manual de usuario

EGO

EGO BAX1300 Manual de usuario

CyberPower

CyberPower BCA Series Manual de usuario

Intermec

Intermec 700 Series Manual de usuario

Dometic

Dometic PLB40 Manual de usuario

V-TAC

V-TAC VT-48280-W2 Manual de usuario

Valence

Valence RT Manual de usuario

Nikon

Nikon MB-D14 Manual de usuario

IOGear

IOGear GBP24V Series Manual de usuario

Inventus Power

Inventus Power PROTRXion S-12V100-TRX-HD Manual de usuario

Clas Ohlson

Clas Ohlson PW-290A Manual de usuario

EINHELL

EINHELL MULTI-Ah Power X-Change Plus Manual de usuario

Samsung

Samsung EB-U3300 Manual de usuario

ECTIVE

ECTIVE LC Series Manual de usuario