RIDGID SeekTech SR-24 Manual de usuario

Original Instructions – English – 1
Operator’s Manual
ST-33QR
SeekTech
Connecting with
&

2 – English
Table of Contents
System Overview
Description �����������������������������������������������������������������������������������������������������������������������������������������������������������������3
Bluetooth Specifications ���������������������������������������������������������������������������������������������������������������������������������������������3
Range�������������������������������������������������������������������������������������������������������������������������������������������������������������������������4
Bluetooth Connection
Connecting the Devices����������������������������������������������������������������������������������������������������������������������������������������������4
Disconnecting the Devices �����������������������������������������������������������������������������������������������������������������������������������������5
Powering the Transmitter ��������������������������������������������������������������������������������������������������������������������������������������������6
Setting the Frequency�������������������������������������������������������������������������������������������������������������������������������������������������6
Transmitter Control Screen �����������������������������������������������������������������������������������������������������������������������������������������6

English – 3
System Overview
This document covers the basics of connecting the de-
vices and controlling the transmitter from the receiver�
Refer to the operator’s manuals for the RIDGID Seek-
Tech SR-24 and RIDGID SeekTech ST-33Q+ for more
information on each product’s individual specifications
and operation�
Description
The RIDGID SeekTech SR-24 receiver and RIDGID
SeekTech ST-33Q+ transmitter are equipped with Blue-
tooth®which allows the units to communicate with one
another during operation� With Bluetooth enabled on
both units, the SR-24 can be used to remotely monitor
the transmitter’s screen and control its operation during
a locate, eliminating the need to walk back and forth to
the transmitter to change settings�
Bluetooth Specifications
Type Class 1
Profile RFCOMM
Transmit power 19 dBm
Receiver sensitivity -92 dBm
Typical maximum operating
range*
100 m − 200 m
(328 ft − 656 ft)
*Effective distance may vary

4 – English
Bluetooth Connection
Connecting the Devices
To connect the devices, follow these steps:
1� Power on the receiver and press the Menu key �
2� Press the Down Arrow key to scroll through the
frequencies list� Highlight the Bluetooth icon and
press the Select key �
3� Press the Select key when the search icon
appears�
4� Press the Down Arrow key to highlight the trans-
mitter you want to connect to� Press the Select key
�
You can identify your transmitter by its name and the last
four digits of its serial number� The transmitter does not
need to be powered on to be discoverable�
Range
The ST-33Q+ and SR-24 work best when kept within
200m [656 ft] of each other while connected by Blue-
tooth� The quality of the connection between devices
may be affected by a number of factors including distan-
ce between devices and objects in the path between de-
vices� For the best quality connection, maintain a clear
line of sight between devices and set the transmitter so
its battery faces the receiver� Objects blocking the line of
sight between the transmitter and the receiver may signi-
ficantly reduce the quality of their connection�

English – 5
Once a connection is made, the transmitter automatically
powers on� When connected, the Bluetooth icon is vi-
sible on both the transmitter’s and the receiver’s screens�
On the transmitter, a chain link image confirms that the
two units are connected�
If the receiver has been paired with multiple transmitters,
it automatically goes through the list and tries to connect
to each one until it is successful�
Note:The receiver can remember up to 16 devices it has
been paired with.For more information on connecting to
other devices, refer to the SR-24 manual.
Disconnecting the Devices
The two devices remain connected until manually discon-
nected� To disconnect the devices, follow these steps:
1� Make sure both the transmitter and receiver are
powered on� On the receiver, press the Menu key
�
2� Press the Down Arrow key to navigate to and hig-
hlight the Bluetooth icon �
3� Press the Select key � The disconnect icon
displays when the devices have succes-
sfully disconnected�
On the transmitter, an image of a broken chain link con-
firms that the two units are disconnected�
On the receiver, a warning alert displays�

6 – English
Powering the Transmitter
When the two units are connected with Bluetooth, powe-
ring the receiver on or off automatically powers the trans-
mitter on or off�
The receiver alerts you to changes in the transmitter’s
power status�
Switching to internal
batteries�
Powered off due to
Power key press�
Powered off due to
low battery�
Setting the Frequency
Changing the receiver’s frequency automatically upda-
tes the transmitter’s frequency to match� If the frequency
is changed on the transmitter, the receiver automatically
updates to match as well�
Transmitter Control Screen
When the devices are connected, you can see the trans-
mitter’s screen from the receiver� The transmitter control
screen allows you to control the transmitter’s frequen-
cy mode, choose between direct connect or inductive
mode, and adjust output power remotely� You can also
remotely power the transmitter on or off and know if the
transmitter has powered off unexpectedly�
Any changes made on the transmitter to frequency, dire-
ct connect or inductive mode, and output power can be
seen on the receiver�
To open the transmitter control screen on the receiver,
press the Menu key , then press the Right Arrow key
to toggle in and out of the transmitter’s control screen�
If more than one Bluetooth enabled SeekTech transmit-
ter is present, press the Left Arrow key to cycle th-
rough available transmitters� Press the serial number li-
sted below the transmitter icon to identify the specific
transmitter you want to control�

English – 7
Direct Connect Mode and Inductive Mode
To remotely set the transmitter to direct connect mode or
inductive mode using the receiver, open the transmitter
control screen� Press the Select key to toggle between
direct connect mode and inductive mode�
Clamp Mode
The receiver can see the transmitter’s clamp mode but
cannot turn the transmitter’s clamp mode on or off� An
inductive clamp must be connected to access clamp
mode� Refer to the operator’s manual for your transmitter
and inductive clamp for more information on using induc-
tive clamp mode�
Output Power
Higher output settings produce a stronger signal for the
receiver, but reduces battery life for the transmitter� Only
use 1,000 mA High Output Mode if using an 18V Li-Ion
rechargeable battery, external power, or high capacity
NiMH D-cell batteries� Do not use the ST-33Q+ in high
output mode with standard alkaline batteries�
You can read the transmitter’s output power or change it
remotely from the receiver� To remotely change the trans-
mitter’s output power using the receiver, open the trans-
mitter control screen� Press the receiver’s Up and Down
Arrow keys to adjust the output power�

Printed in U.S. 6/20/2019
748-024-0599-00-0A
© 2019Ridge Tool Company� All rights reserved�
Every effort has been made to ensure that the information in this manual is accurate� Ridge Tool Company and its affiliates
reserve the right to change the specifications of the hardware, software, or both as described in this manual without notice�
Visit www�RIDGID�com for current updates and supplemental information pertaining to this product� Due to product devel-
opment, the photos and other presentations specified in this manual may differ from the actual product�
RIDGID and the RIDGID logo are trademarks of Ridge Tool Company, registered in the U�S� and other countries� All other
registered and unregistered trademarks and logos mentioned herein are the property of their respective owners� Mention
of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation�
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc�
Ridge Tool Company
400 Clark Street
Elyria, Ohio 44035-6001
U.S.
1-800-474-3443
Ridge Tool Europe
Research Park Haasrode
3001 Leuven
Belgium
+ 32 (0)16 380 280
WWW.RIDGID.COM
Otros manuales para SeekTech SR-24
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Equipo de prueba de RIDGID
Manuales populares de Equipo de prueba de otras marcas

SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies
Agilent Technologies N3280A Manual de usuario

Vernier
Vernier Go Direct Voltage Manual de usuario

Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario

Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación













